United Nations Directories
for Electronic Data Interchange for
Administration, Commerce and Transport
UN/EDIFACT
|
Change indicators
a plus sign (+) for an addition
an asterisk (*) for an amendment to structure
a hash sign (#) for changes to names
a vertical bar (|) for changes to text for descriptions and
notes
a minus sign (-) for marked for deletion (within either
batch and interactive messages)
a X sign (X) for marked for deletion (within both batch
and interactive messages)
4017 Delivery plan commitment level code [B]
Desc: Code specifying the level of commitment to a delivery
plan.
Repr: an..3
Code Values:
1 Firm
Indicates that the scheduling information is a firm
commitment.
2 Commitment for manufacturing and material
Authorizes the supplier to start the manufacturing of
goods.
3 Commitment for material
Authorizes the manufacturer to order material required
for manufacturing specified goods.
| 4 Planning/forecast
An estimate of future requirements based on trends and
actual information.
5 Short delivered on previous delivery
Part of a consignment which was not delivered when the
original delivery was made.
6 Capacity available
Capacity is available to meet the requested scheduling
demands.
| 9 User defined
The user can interpret the meaning of the values from
information exchanged previously.
10 Immediate
Indicates that the scheduling information is for
immediate execution.
| 11 Pilot/Pre-volume
Initial products required in advance of the normal
production process.
| 12 Planning
An estimate of future requirements.
| 13 Potential order increase
The possibility and magnitude of a schedule fluctuation.
| 14 Average plant usage
The usual amount that a manufacturing facility will use
over a specified duration.
| 15 First time reported firm
Initial confirmation of a material requirement.
| 16 Maximum
The highest attainable amount.
| 17 Tooling capacity
The maximum amount that the process was designed to
accommodate.
| 18 Normal tooling capacity
The anticipated amount that the process was designed to
accommodate over a specific period of time.
| 19 Prototype
The preliminary version of a product or service.
| 20 Strike protection
Product level that is set aside as protection in the
event of a work stoppage.
| 21 Required tooling capacity
The contracted amount that the process was designed to
accommodate over a specific period of time.
22 Deliver to schedule
Deliver to schedule separately supplied.
23 Await manual pull
Await non-EDI instruction before shipping.
24 Reference to commercial agreement between partners
The buyer's commitment is the one defined in the
commercial agreement.
26 Proposed
Indicates that the scheduling information is a proposal.
Data Element Cross Reference
DataElement 4017 is used in the following Batch Segments:
SCC
Copyright 1995-2000 United Nations, all rights reserved
UN Economic Commission for Europe
Palais des Nations, CH-1211 Geneva 10, Switzerland
Tel: +41-22 917 2773 Fax: +41-22 917 0037 E-mail: TradeMaster@unece.org
UN/EDIFACT Directories