0.    INTRODUCTION

       This specification provides the definition of the Container
       discharge/loading report message (COARRI) to be used in
       Electronic Data Interchange (EDI) between trading partners
       involved in administration, commerce and transport.

1.    SCOPE

1.1   Functional Definition

       A message by which the container terminal reports that the
       containers specified have been discharged from a seagoing
       vessel (discharged as ordered, overlanded or shortlanded), or
       have been loaded into a seagoing vessel.
       
       This message is part of a total set of container-related
       messages. These messages serve to facilitate the intermodal
       handling of containers by streamlining the information
       exchange.
       The business scenario for the container messages is clarified
       in a separate document, called: 'Guide to the scenario of
       EDIFACT container messages'.

1.2   Field of Application

       The Container discharge/loading report message may be used for
       both national and international trade. It is based on universal
       commercial practice and is not dependent on the type of
       business or industry.

1.3   Principles

       Business area:
       Loading and discharging of containers/equipment
       
       Sending functions include:
       Container terminal, Stevedore
       
       Receiving functions include:
       Ship's agent, Liner agent
       
       In the context of the 'Guide to the scenario of EDIFACT
       container messages' (as referred to at the start of section 1)
       the following guidelines, rules and functionality apply to this
       Container
       discharge/loading report message:
       
       *   The message contents can be uniquely identified by a
       combination of the following data elements:
          - ordering customer, coded (NAD)
          - ordering customer agent, coded (NAD)
          - container discharge/loading order reference (RFF)
       
       The ordering customer agent, coded is needed to supplement the
       unique identification only in the following situation: the
       agent acts on behalf of several ordering customers issuing the
       same range of reference numbers for each customer.
       E.g., the ship's agent acts on behalf of several shipping lines
       issuing for each shipping line the same range of numbers.
       
       *   A message contains information on only one visit/conveyance
       of a seagoing container vessel either arriving or departing.
       
       *   A message contains a report of either discharged or loaded
       containers from or into the seagoing container vessel. One
       report message does not necessarily cover all loaded/discharged
       containers.
       
       *   An indicator for the equipment status may be completed on
       container level (EQD-segment), e.g., import, overlanded or
       shortlanded (for a discharged container) or export (for a
       loaded container).
       
       *   One shipping line can be specified on message level.
       
       *   The seagoing container vessel and sea voyage number can be
       specified on message level.
       
       *   For each container its cell position on board the container
       vessel and its port of discharge can be given.
       
       *   For each container dangerous goods information can be
       specified.
       
       *   A supplementary container reference number (container
       sequence number) is used to refer to the information of the
       container(s) in the loading order message, if the container
       prefix and number was not completed in that message.
       
       *   Goods item details cannot be completed.

2.    REFERENCES

       See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
       Section 1.

3.    TERMS AND DEFINITIONS

       See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
       Section 2.

4.    MESSAGE DEFINITION

4.1   Data Segment Clarification

       This section should be read in conjunction with the Branching
       Diagram and the Segment Table which indicate mandatory,
       conditional and repeating requirements.

 | UNH, Message header
       A service segment starting and uniquely identifying a message.
       The message type code for the Container discharge/loading
       report message is COARRI.
       
       Note: Container discharge/loading report messages conforming to
       this document must contain the following data in segment UNH,
       composite S009:

       Data element  0065 COARRI
                     0052 D
                     0054 95B
                     0051 UN

   BGM, Beginning of message
       A segment to indicate the beginning of a message and to
       transmit identifying number and the further specification of
       the message type (in data element 1001: Document/message name,
       coded), such as Loading report, Discharge report.

   FTX, Free text
       A segment to specify free form or processable supplementary
       information, such as:
       -   change information

   RFF, Reference
       A segment to express a reference which applies to the entire
       message, such as:
       -   container discharge/loading order reference
       -   reference to previous message


   Segment group 1: TDT-RFF-LOC-DTM
       A group of segments to indicate the main carriage means of
       transport.

      TDT, Details of transport
          A segment identifying the voyage of the vessel relevant to
          the message (main transport).

      RFF, Reference
          A segment identifying a relevant reference number, such as:
          -   shipping
          -   syndicate
          -   marketing organization
          -   conference code

      LOC, Place/location identification
          A segment to identify a location related to the means of
          transport, such as:
          -   place of departure/arrival (terminal within the port)

      DTM, Date/time/period
          A segment identifying a date/time related to the arrival or
          departure of the vessel, such as:
          -   estimated date/time of arrival/departure


   Segment group 2: NAD-CTA
       A group of segments to identify a party and related contacts.

      NAD, Name and address
          A segment to identify the party's name, address, and
          function, and other addresses, such as:
          -   message recipient
          -   message sender
          -   ordering customer
          -   ordering customer agent

      CTA, Contact information
          A segment to identify a person or department of a message
          sender and/or message recipient, such as:
          -   information contact


   Segment group 3: EQD-RFF-TMD-DTM-LOC-MEA-DIM-TMP-RNG-SEL-FTX-
                         DGS-EQA-PIA-SG4-SG5-NAD
       A group of segments to specify containers either loaded or
       discharged; in the latter case - only in case of shortlanded -
       the group of segments is to specify containers that had to be
       discharged (according to the discharge order message).
       
       In a normal discharge report and load report message the
       container details are only required if they differ from the
       details given in the respective order message.
       In case of overlanded containers this group will contain the
       full container details giving as much information as possible.
       In case of shortlanded containers this group will only contain
       the container prefix and number.

      EQD, Equipment details
          A segment identifying a container, container size/type.
          The equipment status may be e.g. overlanded, shortlanded,
          import, export.

      RFF, Reference
          A segment identifying a relevant reference number, such as:
          -   container sequence number
          -   booking reference number

      TMD, Transport movement details
          A segment to indicate a Full Container Load (FCL) or a Less
          than Full Container Load (LCL).

      DTM, Date/time/period
          A segment to identify a date/time related to the equipment,
          such as:
          -  actual arrival/departure date/time
          -  CSC expiration date (International Convention for Safe
          Containers)

      LOC, Place/location identification
          A segment to identify a location or country related to the
          equipment, such as:
          -   stowage cell
          -   (final) place/port of discharge
          -   transhipment place
          -   place of delivery
          -   country of origin/destination

      MEA, Measurements
          A segment specifying a physical measurement related to the
          equipment, such as:
          -   gross weight

      DIM, Dimensions
          A segment specifying physical dimensions related to the
          equipment, such as:
          -   gross dimensions
          -   off standard dimension general
          -   off standard dimension left
          -   off standard dimension right
          -   off standard dimension back
          -   off standard dimension front

      TMP, Temperature
          A segment which identifies the transport temperature setting
          of the container.

      RNG, Range details
          A segment to specify the transport temperature range setting
          of the container.

      SEL, Seal number
          A segment identifying a seal number related to the
          equipment.

      FTX, Free text
          A segment to specify supplementary information related to
          the equipment, such as:
          -   blockade reason
          -   government inspection service
          -   container loading remarks
          -   container remarks
          -   container order information
          -   additional remarks concerning the container
          -   container safety convention plate
          -   continuous examination program (ACEP)

      DGS, Dangerous goods
          A segment to identify the UN-number and the class of the
          dangerous goods loaded in the container.

      EQA, Attached equipment
          A segment to identify clip-on units, such as:
          -   generator sets

      PIA, Additional product id
          A segment to specify a commodity code relating to goods in
          the container.


      Segment group 4: DAM-COD
          A group of segments to specify damage details related to the
          equipment.

         DAM, Damage
             A segment to specify equipment damages, such as the point
             of the damage on the quipment, and the type of damage.

         COD, Component details
             A segment to specify component details of the damaged
             equipment.


      Segment group 5: TDT-LOC-DTM
          A group of segments to specify the planned on-carriage
          details in case this message is a discharge report message.

         TDT, Details of transport
             A segment to identify the on-carriage transport details
             of the mode, means of transport by which the container
             will depart after being discharged.

         LOC, Place/location identification
             A segment identifying a location related to the transport
             details, such as:
             -   place of departure

         DTM, Date/time/period
             A segment to specify a date/time relating to the
             on-carriage transport, such as arrival or departure
             date/time.

      NAD, Name and address
          A segment to specify a related address or party, such as:
          -   container operator

   CNT, Control total
       A segment to specify the number of containers in the message,
       explicitly given by the sender.

   UNT, Message trailer
       A service segment ending a message, giving the total number of
       segments in the message and the control reference number of the
       message.

4.2   Data segment index (Alphabetical sequence by tag)

          BGM Beginning of message
          CNT Control total
          COD Component details
          CTA Contact information
          DAM Damage
          DGS Dangerous goods
          DIM Dimensions
          DTM Date/time/period
          EQA Attached equipment
          EQD Equipment details
          FTX Free text
          LOC Place/location identification
          MEA Measurements
          NAD Name and address
          PIA Additional product id
          RFF Reference
          RNG Range details
          SEL Seal number
          TDT Details of transport
          TMD Transport movement details
          TMP Temperature
          UNH Message header
          UNT Message trailer

 Contents of D.95B