0. INTRODUCTION
This specification provides the definition of the Container
gate-in/gate-out report message (CODECO) to be used in
Electronic Data Interchange (EDI) between trading partners
involved in administration, commerce and transport.
1. SCOPE
1.1 Functional Definition
A message by which a terminal, depot, etc. confirms that the
containers specified have been delivered or picked up by the
inland carrier (road, rail or barge).
This message can also be used to report internal terminal
container movements (excluding loading and discharging the
vessel).
This message is part of a total set of container-related
messages. These messages serve to facilitate the intermodal
handling of containers by streamlining the information
exchange. The business scenario for the container messages is
clarified in a separate document, called: 'Guide to the
scenario of EDIFACT container messages'.
1.2 Field of Application
The Container gate-in/gate-out report message may be used for
both national and international trade. It is based on universal
commercial practice and is not dependent on the type of
business or industry.
1.3 Principles
Business area:
Pre- and on-carriage transport of containers/equipment.
Sending functions include:
Container depot, Inland terminal, Container freight station
Receiving functions include:
Shipping agent, Logistic center, Shipper (copy), Freight
forwarder (copy) and Inland carrier (copy)
In the context of the 'Guide to the scenario of EDIFACT
container messages' (as referred to at the start of section 1)
the following guidelines, rules and functionality apply to this
Container gate-in/gate-out report message:
* The message contents can be uniquely identified by a
combination of the following data elements:
- ordering customer, coded (NAD)
- ordering customer agent, coded (NAD)
- container announcement reference number (RFF)
The ordering customer agent, coded is needed to supplement the
unique identification only in the next situation: the agent
acts on behalf of several ordering customers issuing the same
range of reference numbers for each customer.
E.g. the ship's agent acts on behalf of several shipping lines
issuing for each shipping line the same range of numbers.
* A copy of this message may be sent e.g. to the shipper,
freight forwarder, the inland waterways and rail carriers,
according to the communication addresses as mentioned in the
Container announcement.
* One message may contain several containers.
* A supplementary container reference (container sequence
number) is used to refer to the information of the container(s)
in the Container announcement, if the container prefix and
number was not completed in that message.
* An indicator for the transport status (i.e. export, import,
transhipment or continental) is to be completed on container
level (EQD-segment).
* One shipping line can be specified on message level.
* The seagoing vessel and sea voyage number can be specified
on message level.
* Inland transport details can be specified for each
individual container.
* For each container its place of discharge or its position
of loading (stowage cell) in/on the means of inland transport
can be specified.
* In case of export the port of discharge and any port of
transhipment can be specified for each individual container.
* The date/time of pick-up and final address of positioning
or the date/time of delivery must be given for each container.
* For each container seals can be specified affixed by the
shipper, container freight station, terminal, sea carrier and
Customs.
2. REFERENCES
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
Section 1.
3. TERMS AND DEFINITIONS
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
Section 2.
4. MESSAGE DEFINITION
4.1 Data Segment Clarification
This section should be read in conjunction with the Branching
Diagram and the Segment Table which indicate mandatory,
conditional and repeating requirements.
0010 | UNH, Message header
A service segment starting and uniquely identifying a message.
The message type code for the Container gate-in/gate-out report
message is CODECO.
Note: Container gate-in/gate-out report messages conforming to
this document must contain the following data in segment UNH,
composite S009:
Data element 0065 CODECO
0052 D
0054 95B
0051 UN
0020 BGM, Beginning of message
A segment to indicate the beginning of a message and to
transmit identifying number and the further specification of
the message type (in data element 1001: Document/message name,
coded), such as Gate-in report, Gate-out report.
0030 FTX, Free text
A segment to specify free form or processable supplementary
information, such as:
- change information
0040 RFF, Reference
A segment to express a reference which applies to the entire
message, such as:
- reference to previous message
- container announcement reference number
0050 Segment group 1: TDT-RFF-LOC-DTM
A group of segments to indicate information relating to the
main carriage stage of the transport (sea).
0060 TDT, Details of transport
A segment to indicate transport details related to the main
carriage stage of the transport (sea), such as carrier/liner
service.
0070 RFF, Reference
A segment to provide a reference for the liner service, such
as:
- conference
- marketing organization
- syndicate
- vessel sharing agreement
0080 LOC, Place/location identification
A segment to indicate a place/port corresponding to the main
carriage stage.
0090 DTM, Date/time/period
A segment to indicate a date/time relating to the main
carriage.
0100 Segment group 2: NAD-CTA
A group of segments to identify a party and/or addresses and
related contacts.
0110 NAD, Name and address
A segment to identify the party's name and address, and
function, such as:
- message recipient
- message sender
- ordering customer
- ordering customer agent
0120 CTA, Contact information
A segment to identify a person or department of a message
sender and/or message recipient, such as:
- information contact
0130 Segment group 3: GID-HAN-FTX-PIA-MEA-TMP-RNG-SGP-SG4
A group of segments to describe the goods items (to be) stuffed
in or (to be) stripped from the containers.
0140 GID, Goods item details
A segment to identify a goods item (to be) stuffed in or (to
be) stripped from the containers.
0150 HAN, Handling instructions
A segment to specify handling instructions relating to the
goods item, such as:
- hazardous cargo
- off-dimensions
- Customs clearance
0160 FTX, Free text
A segment to describe the goods item or to provide special
instructions.
0170 PIA, Additional product id
A segment to identify a commodity code.
0180 MEA, Measurements
A segment to specify a measurement, other than dimensions,
for the goods item.
0190 TMP, Temperature
A segment to specify a temperature setting for a goods item.
0200 RNG, Range details
A segment to specify a temperature range setting for a goods
item.
0210 SGP, Split goods placement
A segment to identify a container in which goods are
transported.
0220 Segment group 4: DGS-FTX
A group of segments to specify dangerous goods details
related to the goods item. One goods item may be in
different dangerous goods classes.
0230 DGS, Dangerous goods
A segment to indicate the dangerous goods regulations for
the corresponding mode of transport, class of dangerous
goods, additional dangerous goods code, UN-number and
shipment flash point.
0240 FTX, Free text
A segment to specify supplementary details related to the
dangerous goods, such as:
- dangerous goods technical name
- dangerous goods additional information
0250 Segment group 5: EQD-RFF-TMD-DTM-LOC-MEA-DIM-SEL-FTX-EQA-SG6-
SG7-NAD
A group of segments to specify containers in which goods are
transported.
0260 EQD, Equipment details
A segment to specify a container, container size and type
used in the transport, and full/empty indication.
0270 RFF, Reference
A segment to specify the identifying number associated with
the container, such as:
- container sequence number
- booking reference number (sea)
0280 TMD, Transport movement details
A segment to indicate a Full Container Load (FCL) or a Less
than Full Container Load (LCL).
0290 DTM, Date/time/period
A segment to indicate date and time relating to pick-up and
delivery of a container, such as:
- actual equipment collection/pick-up date/time
- actual delivery date/time
0300 LOC, Place/location identification
A segment to specify ports/locations associated with the
transport of a container, such as:
- stowage cell
- place of discharge
0310 MEA, Measurements
A segment to specify measurement, other than dimensions,
associated with the container, such as:
- gross weight
0320 DIM, Dimensions
A segment to specify dimensions applicable to the container,
such as:
- external equipment dimensions
0330 SEL, Seal number
A segment to identify seal and seal issuer associated with
the container, such as shipper, consolidator, carrier (sea),
Customs or terminal operator.
0340 FTX, Free text
A segment to specify processable supplementary information
associated with the container, such as:
- damage remarks
0350 EQA, Attached equipment
A segment to identify related container and means of
transport details (rail), such as:
- rail car
0360 Segment group 6: DAM-COD
A group of segments to specify damage details related to the
equipment.
0370 DAM, Damage
A segment to specify equipment damages, such as the point
of the damage on the equipment, and the type of damage.
0380 COD, Component details
A segment to specify component details of the damaged
equipment.
0390 Segment group 7: TDT-LOC-DTM
A group of segments to indicate details of the movement of
containers by sea and by inland carriers, such as mode and
means of transport and locations.
0400 TDT, Details of transport
A segment to indicate information related to the inland
transport stage (road, rail or inland water), such as
mode of transport, identification of the means of
transport and inland carrier.
0410 LOC, Place/location identification
A segment to specify ports/locations associated with
inland transport of a container, such as:
- place of departure
- place of arrival
0420 DTM, Date/time/period
A segment to specify a date/time relating to the
transport details, such as arrival or departure
date/time.
0430 NAD, Name and address
A segment to specify the actual address where a piece of
euqipment is to be delivered finally (final place of
positioning).
0440 CNT, Control total
A segment to specify the number of containers in the message,.
0450 UNT, Message trailer
A service segment ending a message, giving the total number of
segments in the message and the control reference number of the
message.
4.2 Data segment index (Alphabetical sequence by tag)
BGM Beginning of message
CNT Control total
COD Component details
CTA Contact information
DAM Damage
DGS Dangerous goods
DIM Dimensions
DTM Date/time/period
EQA Attached equipment
EQD Equipment details
FTX Free text
GID Goods item details
HAN Handling instructions
LOC Place/location identification
MEA Measurements
NAD Name and address
PIA Additional product id
RFF Reference
RNG Range details
SEL Seal number
SGP Split goods placement
TDT Details of transport
TMD Transport movement details
TMP Temperature
UNH Message header
UNT Message trailer
Contents of D.95B