0. INTRODUCTION
This specification provides the definition of the Cargo/goods
handling and movement message (HANMOV) to be used in Electronic
Data Interchange (EDI) between trading partners involved in
administration, commerce and transport.
1. SCOPE
1.1 Functional Definition
A message from a party to a warehouse/distribution center
identifying the handling services and where required the
movement of specified goods, limited to warehouses within the
jurisdiction of the distribution centre.
1.2 Field of Application
The Cargo/goods handling and movement message may be used for
both national and international trade. It is based on universal
commercial practice and is not dependent on the type of
business or industry.
1.3 Principles
This message addresses the indirect flow of goods between
seller and buyer through a warehouse/distribution center.
The functions of this message are limited to:
- assembly/disassembly of goods and products, without
interfering in the manufacturing process
- (re-)packing/unpacking
- control of goods associated with the handling services but
not interfering in the manufacturing process
- marking and labeling on the packages of the goods but does
not extend to the marking and labeling of the products
- movement of goods limited between warehouses within the
jurisdiction of the distribution center
- preparation of goods for shipment
- storage
- clearance
- goods inspection
- hazardous material handling
The movement of specified goods relates here to the area where
control of the goods is to be exercised from the arrival of the
goods to the distribution center until the departure of the
goods from the distribution center to another party. It can
include movements between warehouses within the jurisdiction of
the distribution center. Other movements of goods will be given
by the relevant instruction messages, i.e. IFTMIN (Instruction
message)and Instruction For Despatch (message under
development).
The functions Assembly/Disassembly are meant to make the goods
ready for delivery to the final customer, they are not part of
the actual manufacturing or assembly process.
- Goods items may or may not be containerized.
- A goods item may be in one or pieces of equipment, and a
single equipment may contain one or more goods items.
- One goods item and/or line item may be related to one or more
customs tariff codes.
- Goods items may reflect either the contractual or operational
description of the goods.
- Equipment may have other types of equipment attached to it,
e.g. a temperature control unit attached to a container.
- Equipment and/or goods items may be attached to another load
or transport device, which as such may be attached to yet
another load or transport device, e.g. a container on a chassis
on a railway wagon.
- Transport devices, which have the ability of powered movement
on their own, are specified in the transport details group.
Other load or transport devices are specified as equipment.
- The expression of packaging for goods items in the GID
segment can be expressed at up to three levels.
A number of generic transport terms are described in the Annex
(glossary of terms).
2. REFERENCES
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
Section 1.
3. TERMS AND DEFINITIONS
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
Section 2.
4. MESSAGE DEFINITION
4.1 Data Segment Clarification
This section should be read in conjunction with the Branching
Diagram and the Segment Table which indicate mandatory,
conditional and repeating requirements.
0010 | UNH, Message header
A service segment starting and uniquely identifying a message.
The message type code for the Cargo/goods handling and movement
message is HANMOV.
Note: Cargo/goods handling and movement messages conforming to
this document must contain the following data in segment UNH,
composite S009:
Data element 0065 HANMOV
0052 D
0054 95B
0051 UN
0020 BGM, Beginning of message
A segment to indicate the beginning of the message by
identifying the message by a document/message number.
0030 DTM, Date/time/period
A segment to indicate date(s), time(s) and periods relating to
the whole message, e.g. document/message date.
0040 HAN, Handling instructions
A segment providing information on general handling
instructions applicable to all data in the message, e.g.
assembly and/or preparation of goods for shipment.
0050 FTX, Free text
A segment to specify free form or processable supplementary
information. In computer-to-computer exchanges free form text
will normally require the receiver to process this segment
manually.
0060 CNT, Control total
A segment to specify control totals.
0070 Segment group 1: TCC-LOC-FTX-CUX
A group of segments to specify charges associated with the
handling.
0080 TCC, Transport charge/rate calculations
A segment to specify a charge.
0090 LOC, Place/location identification
A segment to indicate a location where the chargeable action
is (to be) performed.
0100 FTX, Free text
A segment to specify processable supplementary information
associated with charge.
0110 CUX, Currencies
A segment to specify currencies associated with charge.
0120 Segment group 2: RFF-DTM
A group of segments containing references and constants which
apply to the entire message.
0130 RFF, Reference
A segment to express a reference which applies to the entire
message such as: the document/message number that is to be
updated by this very message (according to data element 1225
- Message function, coded in segment BGM).
0140 DTM, Date/time/period
A segment to indicate date and time relating to the
reference.
0150 Segment group 3: NAD-LOC-DOC-SG4-SG5
A group of segments to identify a party, related references,
locations, contacts and required documents.
0160 NAD, Name and address
A segment to identify the party's name, address and
function, e.g. warehouse/distribution centre.
0170 LOC, Place/location identification
A segment to indicate a location where a specific function
will be performed.
0180 DOC, Document/message details
A segment to identify a document required of, by or for the
party.
0190 Segment group 4: RFF-DTM
A group of segments to specify a reference related to the
party.
0200 RFF, Reference
A segment to identify a reference used by a party.
0210 DTM, Date/time/period
A segment to indicate date and time relating to the
reference.
0220 Segment group 5: CTA-COM
A group of segments identifying a contact and its
communications related to the party.
0230 CTA, Contact information
A segment to identify a person or department within the
party.
0240 COM, Communication contact
A segment to identify a communication number of a person
or department to whom communication should be directed.
0250 Segment group 6: TDT-DTM-LOC-RFF
A group of segments to indicate details of the movement of
goods such as mode and means of transport, locations,
departure, and arrival date(s) and time(s).
0260 TDT, Details of transport
A segment to indicate information related to a certain stage
of the transport, such as mode, means and carrier.
0270 DTM, Date/time/period
A segment to indicate date and time relevant to the
transport details, e.g. departure date/time.
0280 LOC, Place/location identification
A segment to indicate a location such as transport origin,
destination, stop-off, etc.
0290 RFF, Reference
A segment to specify an additional reference related to the
stage of the transport.
0300 Segment group 7: LIN-PIA-IMD-HAN-TCC-SG8-MEA-QTY-GIN-GIR-DTM-
FTX-SG10-LOC-SG11
A group of segments providing details of the individually
handled product items.
0310 LIN, Line item
A segment identifying the product item being handled or the
resulting product code after assembly or disassembly.
0320 PIA, Additional product id
A segment providing additional product identification, e.g.
EAN number.
0330 IMD, Item description
A segment to describe the product being handled. This
segment should be used for products that cannot be
identified by a product code or article number.
0340 HAN, Handling instructions
A segment to specify handling instructions specific to the
product item in addition to and not overriding the handling
instructions on message level.
0350 TCC, Transport charge/rate calculations
A segment to specify a charge associated with the product
item, e.g. assembly charge.
0360 Segment group 8: NAD-SG9
A group of segments for identifying names and addresses and
their functions.
0370 NAD, Name and address
A segment to identify the party's name, address and
function, e.g. seller, buyer, inspecting party. It is
recommended that where possible only the coded form of
the party identification should be specified, e.g. when
the buyer and seller are known to each other.
0380 Segment group 9: CTA-COM
A group of segments identifying a contact and its
communications related to the party.
0390 CTA, Contact information
A segment to identify a person or department within a
party.
0400 COM, Communication contact
A segment to identify a communication number of a
person or department to whom communication should be
directed.
0410 MEA, Measurements
A segment identifying physical measurements of the handled
product item in original or unpacked form.
0420 QTY, Quantity
A segment to give quantity information concerning the
product.
0430 GIN, Goods identity number
A segment providing identity numbers of the goods being
handled, e.g. serial numbers for assembled products.
0440 GIR, Related identification numbers
A segment providing sets of related identification numbers
for a product item, e.g. in case of assembly (disassembly)
engine number, chassis number and transmission number for a
vehicle.
0450 DTM, Date/time/period
A segment providing date/time information related to the
product item, e.g. production date.
0460 FTX, Free text
A segment to specify free form or processable information,
which further clarifies, when required, the product item. In
computer-to-computer exchanges free form text will normally
require the receiver to process this segment manually.
0470 Segment group 10:RFF-DTM
A group of segments to give reference numbers and dates.
0480 RFF, Reference
A segment identifying a reference related to the product
item and/or a reference as a pointer to the goods item
number in the GID group.
0490 DTM, Date/time/period
A segment to specify date/time/period relating to the
reference.
0500 LOC, Place/location identification
A segment identifying a specific location, e.g. within the
warehouse/distribution center.
0510 Segment group 11:PAC-MEA-QTY-SG12
A group of segments providing details how the product item
is packed, such as number and type of packages, physical
measurements and quantities.
0520 PAC, Package
A segment to describe packaging details for the product
item.
0530 MEA, Measurements
A segment specifying physical measurements of packages.
0540 QTY, Quantity
A segment to specify a quantity of products per package.
0550 Segment group 12:PCI-GIN
A group of segments identifying one specific package or a
number of packages, their marks and numbers.
0560 PCI, Package identification
A segment specifying marking and labels used on
individual packages or a range of packages.
0570 GIN, Goods identity number
A segment providing identification numbers being
applied to the packages handled.
0580 Segment group 13:GID-HAN-CST-TMP-RNG-LOC-MOA-PIA-FTX-NAD-MEA-
DIM-RFF-PCI-SG14-SGP-TCC-SG15
A group of segments to describe the goods items for which
transport is undertaken.
0590 GID, Goods item details
A segment to identify a goods item for which handling is
specified. A goods item can be identified at up to three
levels of packaging.
0600 HAN, Handling instructions
A segment to specify handling instructions specific to the
goods item in addition to and not overriding the handling
instructions on message level.
0610 CST, Customs status of goods
A segment to specify goods in terms of customs identities.
0620 TMP, Temperature
A segment to specify a temperature setting for a goods item.
0630 RNG, Range details
A segment to specify a temperature range setting for a goods
item.
0640 LOC, Place/location identification
A segment identifying a specific location, e.g. within the
warehouse/distribution center.
0650 MOA, Monetary amount
A segment to specify a monetary amount associated with a
goods item, such as declared value, FOB value, etc.
0660 PIA, Additional product id
A segment to specify article numbers, e.g. in case of
repackaging.
0670 FTX, Free text
A segment to specify processable supplementary information
relating to the goods item, e.g. goods description.
0680 NAD, Name and address
A segment to specify an address of a place of collection or
delivery or inspecting party for a goods item.
0690 MEA, Measurements
A segment to specify measurements, other than dimensions,
applicable to a goods item.
0700 DIM, Dimensions
A segment to specify dimensions applicable to a goods item.
0710 RFF, Reference
A segment to identify a reference to a goods item.
0720 PCI, Package identification
A segment to specify marks and numbers of a goods item.
0730 Segment group 14:DOC-DTM
A group of segments to specify documents and associated
date(s) and time(s) for a goods item.
0740 DOC, Document/message details
A segment to specify a document prepared for a goods
item.
0750 DTM, Date/time/period
A segment to associate date and time with the prepared
document.
0760 SGP, Split goods placement
A segment to identify the equipment in which goods are
loaded.
0770 TCC, Transport charge/rate calculations
A segment to specify charge associated with the goods item.
0780 Segment group 15:DGS-FTX-MEA
A group of segments to specify dangerous goods details
related to the goods item. One goods item may be in
different dangerous goods classes.
0790 DGS, Dangerous goods
A segment to indicate the class of dangerous goods,
packing group, etc.
0800 FTX, Free text
A segment to specify the dangerous goods technical name
and to specify any additional dangerous goods
information.
0810 MEA, Measurements
A segment to specify measurements of that portion of the
dangerous goods in the equipment.
0820 Segment group 16:EQD-EQN-SEL-EQA
A group of segments to specify equipment in which goods are
loaded.
0830 EQD, Equipment details
A segment to specify equipment and equipment size and type
used in the transport.
0840 EQN, Number of units
A segment to identify the number of pieces of equipment.
0850 SEL, Seal number
A segment to identify seal and seal issuer associated with
the equipment.
0860 EQA, Attached equipment
A segment to identify attached or related equipment such as
chassis attached to a container.
0870 UNT, Message trailer
A service segment ending a message, giving the total number of
segments in the message and the control reference number of the
message.
4.2 Data segment index (Alphabetical sequence by tag)
BGM Beginning of message
CNT Control total
COM Communication contact
CST Customs status of goods
CTA Contact information
CUX Currencies
DGS Dangerous goods
DIM Dimensions
DOC Document/message details
DTM Date/time/period
EQA Attached equipment
EQD Equipment details
EQN Number of units
FTX Free text
GID Goods item details
GIN Goods identity number
GIR Related identification numbers
HAN Handling instructions
IMD Item description
LIN Line item
LOC Place/location identification
MEA Measurements
MOA Monetary amount
NAD Name and address
PAC Package
PCI Package identification
PIA Additional product id
QTY Quantity
RFF Reference
RNG Range details
SEL Seal number
SGP Split goods placement
TCC Transport charge/rate calculations
TDT Details of transport
TMP Temperature
UNH Message header
UNT Message trailer
Contents of D.95B