0.    INTRODUCTION

       This specification provides the definition of the Stowage
       instruction message (MOVINS) to be used in Electronic Data
       Interchange (EDI) between trading partners involved in
       administration, commerce and transport.

1.    SCOPE

1.1   Functional Definition

       A Stowage instruction message contains details of one means of
       transport vehicle, giving instructions regarding the loading,
       discharging and restowage of equipment and/or cargoes and the
       location on the means of transport where the operation must
       take place.

1.2   Field of Application

       The Stowage instruction message may be used for both national
       and international trade. It is based on universal commercial
       practice and is not dependent on the type of business or
       industry.

1.3   Principles

       In the shipping industry the Stowage instruction message can be
       used between partners involved in the loading and discharging
       of vessels and other means of transport, like stevedores,
       shipping lines, tonnage centres, etc..

2.    REFERENCES

       See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
       Section 1.

3.    TERMS AND DEFINITIONS

       See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
       Section 2.

4.    MESSAGE DEFINITION

4.1   Data Segment Clarification

       This section should be read in conjunction with the Branching
       Diagram and the Segment Table which indicate mandatory,
       conditional and repeating requirements.

0010 | UNH, Message header
       A service segment starting and uniquely identifying a message.
       The message type code for the Stowage instruction message is
       MOVINS.
       
       Note: Stowage instruction messages conforming to this document
       must contain the following data in segment UNH, composite S009:

       Data element  0065 MOVINS
                     0052 D
                     0054 95B
                     0051 UN

0020   BGM, Beginning of message
       A segment to indicate the beginning of the message and to
       transmit identifying number and type of the message.

0030   DTM, Date/time/period
       A segment to indicate the date of the preparation of the
       message.

0040   RFF, Reference
       A segment to indicate a message reference number.

0050   NAD, Name and address
       A segment to identify liner service, carrier, consortium,
       container terminal or other party.


0060   Segment group 1: TDT-LOC-DTM-RFF-FTX
       A group of segments identifying the means of transport and
       related details.

0070      TDT, Details of transport
          A segment to identify the means of transport and discharge
          voyage number.

0080      LOC, Place/location identification
          A segment to identify the locations to which the following
          information applies.

0090      DTM, Date/time/period
          A segment to indicate date and time of events in local time,
          else the time zone must be indicated.

0100      RFF, Reference
          A segment to identify the loading voyage number.

0110      FTX, Free text
          A segment to transmit general information.


0120   Segment group 2: HAN-SG3
       A group of segments containing information about the equipment
       and/or goods to be discharged or to be loaded and its
       (intended) stowage location on board a means of transport.

0130      HAN, Handling instructions
          A segment to specify the type of handling, e.g. discharging
          or loading.


0140      Segment group 3: LOC-RFF-FTX-MEA-DIM-LOC-NAD-SG4-SG5-SG6-
                            SG7-SG8
          A group of segments containing information about the
          location, the identification and the type of equipment and
          other details regarding equipment and/or goods to be
          handled.

0150         LOC, Place/location identification
             A segment to identify a stowage location relevant to the
             equipment or goods carried.

0160         RFF, Reference
             A segment to give reference numbers on equipment or goods
             carried (i.e. reference numbers allocated by the carrier
             for special goods and/or equipment).

0170         FTX, Free text
             A segment to transmit the goods description, additional
             equipment details or other relevant free text.

0180         MEA, Measurements
             A segment specifying physical weights related to an
             equipment detail or a goods item detail.

0190         DIM, Dimensions
             A segment to identify off-standard measurements (e.g.
             overheight, overlength, overwidth, etc.).

0200         LOC, Place/location identification
             A segment to identify the locations (ports) to which the
             given information applies.

0210         NAD, Name and address
             A segment to identify the owner/operator of a particular
             piece of equipment.


0220         Segment group 4: TMP-RNG
             A group of segments to specify a temperature (and range).

0230            TMP, Temperature
                A segment which identifies the temperature setting in
                relation to an equipment detail.

0240            RNG, Range details
                A segment to indicate a minimum and maximum range of
                temperatures in relation to an equipment detail.


0250         Segment group 5: EQD-EQN
             A group of segments containing information about the
             number and type of equipment or the identification of the
             equipment to be loaded or discharged.

0260            EQD, Equipment details
                A segment to identify a single piece of equipment or
                the type and number of equipment to which the
                following details apply.
                Only transport equipment size/type coded or plain
                language is used here to further identify the
                equipment.

0270            EQN, Number of units
                A segment to identify the number of units.


0280         Segment group 6: EQA-EQN
             A group of segments containing information about the
             number or the identification of attached equipment.

0290            EQA, Attached equipment
                A segment to identify the type and/or identification
                of equipment attached to the main piece of equipment.

0300            EQN, Number of units
                A segment to identify the number of units of attached
                equipment.


0310         Segment group 7: GID-GDS
             A group of segments containing information about the
             number of packages and kind of goods.

0320            GID, Goods item details
                A segment to identify the number of packages of the
                goods.

0330            GDS, Nature of cargo
                A segment to describe the nature of the cargo.


0340         Segment group 8: RFF-SG9
             A group of segments containing information about
             dangerous cargo.

0350            RFF, Reference
                A segment to indicate a reference number allocated by
                the carrier to a piece of equipment containing
                dangerous cargo.


0360            Segment group 9: DGS-FTX
                A group of segments to specify dangerous goods and
                additional information.

0370               DGS, Dangerous goods
                   A segment which identifies dangerous goods related
                   to an equipment or goods detail.

0380               FTX, Free text
                   A segment which gives additional information
                   concerning dangerous goods.

0390   UNT, Message trailer
       A service segment ending a message, giving the total number of
       segments in the message and the control reference number of the
       message.

4.2   Data segment index (Alphabetical sequence by tag)

          BGM Beginning of message
          DGS Dangerous goods
          DIM Dimensions
          DTM Date/time/period
          EQA Attached equipment
          EQD Equipment details
          EQN Number of units
          FTX Free text
          GDS Nature of cargo
          GID Goods item details
          HAN Handling instructions
          LOC Place/location identification
          MEA Measurements
          NAD Name and address
          RFF Reference
          RNG Range details
          TDT Details of transport
          TMP Temperature
          UNH Message header
          UNT Message trailer

Contents of D.95B