0.    INTRODUCTION

       This specification provides the definition of the Quality data
       message (QALITY) to be used in Electronic Data Interchange
       (EDI) between trading partners involved in administration,
       commerce and transport.

1.    SCOPE

1.1   Functional Definition

       A message to enable the transmission of the results of tests
       performed to satisfy a specified product or process
       requirement. The content includes, but is not limited to, test
       data and measurements, statistical information, and the testing
       methods employed.

1.2   Field of Application

       The UN Standard Quality Data Message may be applied for both
       national and international trade. It is based on universal
       commercial practice and is not dependent on the type of
       business or industry.

1.3   Principles

       - A Quality Data Message detail line may refer to either goods
       items or services.
       
       - The values within a Quality Data Message may refer to: 
       
       . a product/service, 
       . a product via batch references,
       . process type information of a product.
       
       - A Quality Data Message may contain discrete or statistical
       values as well as product specification values.

2.    REFERENCES

       See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
       Section 1.

3.    TERMS AND DEFINITIONS

       See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
       Section 2.

4.    MESSAGE DEFINITION

4.1   Data Segment Clarification

       This section should be read in conjunction with the Branching
       Diagram and the Segment Table which indicate mandatory,
       conditional and repeating requirements.
       
       The following guidelines and principles apply to the whole
       message and are intended to facilitate the understanding and
       implementation of the message:
       
       All specified dates/times should be in the format
       'yymmdd'/'hhmm' unless all parties involved in the transaction
       agree that there is a
       functional requirement for an alternative format. Periods
       should be specified as whole numbers representing the required
       period as indicated in the format qualifier (weeks, months,
       etc.) 
       
       Where a choice of code or text is given only the code element
       should be used wherever possible.
       
       Conditional data that is not required in the message should not
       be included.
       
       Care must be taken that the segment qualifier in dependent
       segments do not conflict with the segment qualifier of the
       trigger segment of a group.
       
       Free text information within the message should be avoided as
       this inhibits automatic processing.

4.1.1  Header section

       Information to be provided in the Header section:

0010 | UNH, Message header
       A service segment starting and uniquely identifying a message.
       The message type code for the Quality data message is QALITY.
       
       Note: Quality data messages conforming to this document must
       contain the following data in segment UNH, composite S009:

       Data element  0065 QALITY
                     0052 D
                     0054 95B
                     0051 UN

0020   BGM, Beginning of message
       A segment by which the sender uniquely identifies the Quality
       Data Message by means of its type and number.

0030   DTM, Date/time/period
       A segment specifying general dates and, when relevant, times
       related to the whole message. The segment must be specified at
       least once to identify the quality data message date.
       
       Example of the use of this DTM-segment is : date/time frame of
       reported data that apply to the whole quality data message.
       
       The Date/time/period segment within other segment groups should
       be used whenever the date/time/period requires to be logically
       related to another specified data item; e.g. date of
       measurement must be specified within the measurement segment
       group.

0040   IMD, Item description
       A segment for describing the product involved.

0050   MEA, Measurements
       A segment to allow physical measurements and dimensions to be
       stated, where this is required for identification of the
       product.

0060   FTX, Free text
       A segment with free text information, in coded or clear form,
       to give further clarification, when required, to the whole
       message. In computer to computer exchanges such text will
       normally require the receiver to handle this segment manually.


0070   Segment group 1: RFF-DTM
       A segment group for referencing documents and where necessary,
       their dates, relating to the whole message, e.g. purchase
       order, shipment/consignment number.

0080      RFF, Reference
          A segment identifying the referenced document by its number
          and where appropriate, a line number within that document.

0090      DTM, Date/time/period
          A segment specifying the date/time of the referenced
          document. The specified date should be in 'yymmdd' format,
          unless all parties agree that there is a functional
          requirement for an alternative format.


0100   Segment group 2: NAD-LOC-SG3-SG4
       A group of segments identifying the parties relevant to the
       whole Quality Data Message, with associated information.

0110      NAD, Name and address
          A segment identifying names and addresses of parties, in
          coded or clear form, and their function relevant for the
          whole Quality Data Message. Identification of the Sender and
          Receiver party is mandatory for the Quality Data Message.
          They are to be given in the NAD segment.

0120      LOC, Place/location identification
          A segment indicating more details regarding specific
          locations related to the party specified in the NAD-
          segment, e.g. internal site/building number.


0130      Segment group 3: RFF-DTM
          A segment group giving references and where necessary, date
          information only relevant to the specified party.

0140         RFF, Reference
             A segment identifying the reference by its number and
             where appropriate a line number within a document.

0150         DTM, Date/time/period
             A segment specifying the date and/or time of the
             reference. The specified date should be in 'yymmdd'
             format unless all parties agree that there is a
             functional requirement for an alternative format.


0160      Segment group 4: CTA-COM
          A group of segments giving contact details of the specific
          person or department within the party identified in the NAD
          segment.

0170         CTA, Contact information
             A segment to identify a person or department, and their
             function, to whom communications should be directed.

0180         COM, Communication contact
             A segment to identify a communication type and number for
             the contact specified in the CTA segment.

4.1.2  Detail section

       Information to be provided in the Detail section:


0190   Segment group 5: LIN-PIA-IMD-MEA-PSD-SPS-DTM-QTY-FTX-SG6-SG7-
                         SG10-SG12-SG20-SG30
       A group of segments providing the relevant quality data for the
       specified product.

0200      LIN, Line item
          A segment identifying the line item by its number and
          additionally, identifying the product involved by a product
          identification number.
          Other product identification numbers are specified in the
          following PIA segment, e.g. Customer part number, etc.

0210      PIA, Additional product id
          A segment providing additional product identification to
          that specified in the LIN segment, e.g. Buyer part number.

0220      IMD, Item description
          A segment for describing the product involved. This segment
          should be used for products that cannot be identified by a
          product code or article number.

0230      MEA, Measurements
          A segment to allow physical measurements and dimensions to
          be stated, where this is required for identification of the
          product.

0240      PSD, Physical sample description
          A segment to define the physical sample parameters,
          associated with a test, resulting in discrete measurements.
          If used in this position, the values apply to all following
          values of product properties.

0250      SPS, Sampling parameters for summary statistics
          A segment to define the sampling parameters associated with
          summary statistics reported. If used in this position, the
          values apply to all following values of product properties.

0260      DTM, Date/time/period
          A segment specifying date/time/period details to the line
          item only. Any specified date should be in 'yymmdd' format
          unless all parties agree that there is a functional
          requirement for an alternative format.

0270      QTY, Quantity
          A segment to enable quantity information to be specified.

0280      FTX, Free text
          A segment with free text in coded or clear form, to give
          further clarification, when required, for the line item. In
          computer to computer exchanges such text will normally
          require the receiver to handle this segment manually.


0290      Segment group 6: RFF-DTM
          A segment group for referencing documents relating to the
          line item and where necessary, their dates.

0300         RFF, Reference
             A segment identifying the referenced document by its
             number and where appropriate, a line number within that
             document.

0310         DTM, Date/time/period
             A segment specifying the date/time of the referenced
             document. The specified date should be in 'yymmdd'
             format, unless all parties agree that there is a
             functional requirement for an alternative format.


0320      Segment group 7: NAD-LOC-SG8-SG9
          A group of segments identifying the parties with associated
          information, relevant to the line item only.

0330         NAD, Name and address
             A segment identifying names and addresses of parties, in
             coded or clear form, and their function relevant for the
             line item.

0340         LOC, Place/location identification
             A segment indicating more details regarding specific
             locations related to the party specified in the NAD-
             segment, e.g. internal site/building number.


0350         Segment group 8: RFF-DTM
             A segment group giving references and where necessary,
             date information only relevant to the specified party.

0360            RFF, Reference
                A segment identifying the reference by its number and
                where appropriate a line number within a document.

0370            DTM, Date/time/period
                A segment specifying the date and/or time of the
                reference. The specified date should be in 'yymmdd'
                format unless all parties agree that there is a
                functional requirement for an alternative format.


0380         Segment group 9: CTA-COM
             A group of segments giving contact details of the
             specific person or department within the party identified
             in the NAD segment.

0390            CTA, Contact information
                A segment to identify a person or department, and
                their function, to whom communications should be
                directed.

0400            COM, Communication contact
                A segment to identify a communication type and number
                for the contact specified in the CTA segment.


0410      Segment group 10:TEM-MEA-DTM-SG11
          A group of segments to provide details of the test methods,
          employed including any circumstances, test devices,
          references and dates.

0420         TEM, Test method
             A segment to describe the nature of the test performed.

0430         MEA, Measurements
             A segment to provide the necessary values of the various
             circumstances related to the tests, e.g. temperature
             reading when test performed.

0440         DTM, Date/time/period
             A segment specifying the date, and when relevant, the
             time of an activity identified by the date/time
             qualifier, e.g. test date/time.


0450         Segment group 11:RFF-DTM
             A segment group of referencing documents relating to the
             test method and where necessary, their dates, e.g. device
             number.

0460            RFF, Reference
                A segment identifying the referenced document by its
                number and where appropriate, a line number within
                that document.

0470            DTM, Date/time/period
                A segment specifying the date/time of the referenced
                document. The specified date should be in 'yymmdd'
                format, unless all parties agree that there is a
                functional requirement for an alternative format.


0480      Segment group 12:CCI-PSD-SPS-DTM-FTX-SG13-SG14-SG16-SG18
          A group of segments to be used to define a class of
          properties, the individual properties within that class and
          the related data (e.g. discrete values, statistical
          information, test methods). When this segment group is used,
          the data is directly related to the product specified.

0490         CCI, Characteristic/class id
             To specify the general class and/or the individual
             properties on which the Quality Data is being reported.
             Note: within the CCI-segment Property class, coded (7059)
             or Measurement dimension, coded (6313) or Characteristic
             identification (7037) must be present.
             
             If Property class, coded (7059) AND Measurement
             dimension, coded (6313) are present, then Characteristic
             identification (7037) is not allowed.
             
             If only Property class, coded is used within the
             CCI-segment, then the individual properties must be
             specified within the related STA/MEA-segments.
             
             The data element Characteristic (7036) should only be
             used to enhance the meaning of the code value (e.g. if no
             specific code available and code value ZZ (mutually
             defined) is used then Description can be used to further
             describe the Product Characteristics.
             
             NB: The Class identification element in this segment is
             only used to specify the product characteristic class,
             e.g. Chemistry or Physical Dimensions.

0500         PSD, Physical sample description
             A segment to define the physical sample parameters
             associated with a test resulting in discrete
             measurements. If used in this position, the values only
             apply to data within the same analysis group.

0510         SPS, Sampling parameters for summary statistics
             A segment to define the sampling parameters associated
             with summary statistics reported. If used in this
             position, the values only apply to data within the same
             analysis group.

0520         DTM, Date/time/period
             A segment specifying the date, and when relevant, the
             time of an activity identified by the date/time
             qualifier, e.g. date/time, test performed.

0530         FTX, Free text
             A segment with free text information to give further
             clarification within Segment group 12: the Analysis
             Group.


0540         Segment group 13:RFF-DTM
             A segment group of referencing documents relating to the
             Analysis Section and where necessary, their dates, e.g.
             Purchase order, shipment note.

0550            RFF, Reference
                A segment identifying the referenced document by its
                number and where appropriate, a line number within
                that document.

0560            DTM, Date/time/period
                A segment specifying the date/time of the referenced
                document. The specified date should be in 'yymmdd'
                format, unless all parties agree that there is a
                functional requirement for an alternative format.


0570         Segment group 14:MEA-DTM-SG15
             A group of segments to allow measurement values or
             specification values to be specified along with their
             associated references and dates. The data element
             Measurement Application Qualifier (6311) indicates the
             type of the values.

0580            MEA, Measurements
                A segment to specify discrete values, other
                measurement results or specification values. These
                values may be specified as a range and may be
                qualified by the significance and/or the attribute
                codes.

0590            DTM, Date/time/period
                A segment specifying the date, and when relevant, the
                time of an activity identified by the date/time
                qualifier, e.g. test date/time.


0600            Segment group 15:RFF-DTM
                A Segment group of referencing documents relating to
                the specifications and values and where necessary,
                their dates.

0610               RFF, Reference
                   A segment identifying the referenced document by
                   its number and where appropriate, a line number
                   within that document.

0620               DTM, Date/time/period
                   A segment specifying the date/time of the
                   referenced document. The specified date should be
                   in 'yymmdd' format, unless all parties agree that
                   there is a functional requirement for an
                   alternative format.


0630         Segment group 16:STA-DTM-SG17
             A group of segments to provide the necessary information
             for summary statistics with any related references and
             dates.

0640            STA, Statistics
                A segment to specify the values required for
                statistics including codes to define the type of
                statistics and the measure unit employed.

0650            DTM, Date/time/period
                A segment specifying the date, and when relevant, the
                time of an activity identified by the date/time
                qualifier, e.g. time frame of statistical period.


0660            Segment group 17:RFF-DTM
                A Segment group of referencing documents relating to
                the statistics and where necessary, their dates.

0670               RFF, Reference
                   A segment identifying the referenced document by
                   its number and where appropriate, a line number
                   within that document.

0680               DTM, Date/time/period
                   A segment specifying the date/time of the
                   referenced document.
                   The specified date should be in 'yymmdd' format,
                   unless all parties agree that there is a functional
                   requirement for an alternative format.


0690         Segment group 18:TEM-MEA-DTM-SG19
             A group of segments to provide details of the test
             methods, employed including any circumstances, test
             devices, references and dates.

0700            TEM, Test method
                A segment to describe the nature of the test
                performed.

0710            MEA, Measurements
                A segment to provide the necessary values of the
                various circumstances related to the tests, e.g.
                temperature reading when test performed.

0720            DTM, Date/time/period
                A segment specifying the date, and when relevant, the
                time of an activity identified by the date/time
                qualifier.


0730            Segment group 19:RFF-DTM
                A Segment group of referencing documents relating to
                the test method and where necessary, their dates.

0740               RFF, Reference
                   A segment identifying the referenced document by
                   its number and where appropriate, a line number
                   within that document.

0750               DTM, Date/time/period
                   A segment specifying the date/time of the
                   referenced document. The specified date should be
                   in 'yymmdd' format, unless all parties agree that
                   there is a functional requirement for an
                   alternative format.


0760      Segment group 20:GIN-DTM-SG21-SG22
          A group of segments to enable batch related information to
          be specified.

0770         GIN, Goods identity number
             A segment providing specific serial or batch numbers,
             relating to the specified product. These may be single
             numbers or ranges of numbers.

0780         DTM, Date/time/period
             A segment specifying the date, and when relevant, the
             time of an activity identified by the date/time
             qualifier., e.g. batch process date.


0790         Segment group 21:RFF-DTM
             A Segment group of referencing documents relating to the
             batch and where necessary, their dates.

0800            RFF, Reference
                A segment identifying the referenced document by its
                number and where appropriate, a line number within
                that document.

0810            DTM, Date/time/period
                A segment specifying the date/time of the referenced
                document. The specified date should be in 'yymmdd'
                format, unless all parties agree that there is a
                functional requirement for an alternative format.


0820         Segment group 22:CCI-PSD-SPS-DTM-FTX-SG23-SG24-SG26-SG28
             A group of segments to be used to define a class of
             properties, the individual properties within that class
             and the related data (e.g. discrete values, statistical
             information, test methods). When this segment group is
             used, the data is directly related to the product
             specified.

0830            CCI, Characteristic/class id
                To specify the general class and/or the individual
                properties on which the Quality Data is being
                reported. Note: within the CCI-segment Property class,
                coded (7059) or Measurement dimension, coded (6313) or
                Characteristic identification (7037) must be present.
                
                If Property class, coded (7059) AND Measurement
                dimension, coded (6313) are present, then
                Characteristic identification (7037) is not allowed.
                
                If only Property class, coded is used within the
                CCI-segment, then the individual properties must be
                specified within the related STA/MEA-segments.
                
                The data element Characteristic (7036) should only be
                used to enhance the meaning of the code value (e.g. if
                no specific code available and code value ZZ (mutually
                defined) is used then Description can be used to
                further describe the Product Characteristics.
                
                NB: The Class identification element in this segment
                is only used to specify the product characteristic
                class, e.g. Chemistry or Physical Dimensions.

0840            PSD, Physical sample description
                A segment to define the physical sample parameters
                associated with a test resulting in discrete
                measurements. If used in this position, the values
                only apply to data within the same analysis group.

0850            SPS, Sampling parameters for summary statistics
                A segment to define the sampling parameters associated
                with summary statistics reported. If used in this
                position, the values only apply to data within the
                same analysis group.

0860            DTM, Date/time/period
                A segment specifying the date, and when relevant, the
                time of an activity identified by the date/time
                qualifier, e.g. date/time, test performed.

0870            FTX, Free text
                A segment with free text information to give further
                clarification within Segment group 22: the Analysis
                Group.


0880            Segment group 23:RFF-DTM
                A segment group of referencing documents relating to
                the Analysis Section and where necessary, their dates,
                e.g. Purchase order, shipment note.

0890               RFF, Reference
                   A segment identifying the referenced document by
                   its number and where appropriate, a line number
                   within that document.

0900               DTM, Date/time/period
                   A segment specifying the date/time of the
                   referenced document.
                   The specified date should be in 'yymmdd' format,
                   unless all parties agree that there is a functional
                   requirement for an alternative format.


0910            Segment group 24:MEA-DTM-SG25
                A group of segments to allow measurement values or
                specification values to be specified along with their
                associated references and dates. The data element
                Measurement Application Qualifier (6311) indicates the
                type of the values.

0920               MEA, Measurements
                   A segment to specify discrete values, other
                   measurement results or specification values. These
                   values may be specified as a range and may be
                   qualified by the significance and/or the attribute
                   codes.

0930               DTM, Date/time/period
                   A segment specifying the date, and when relevant,
                   the time of an activity identified by the date/time
                   qualifier, e.g. test date/time.


0940               Segment group 25:RFF-DTM
                   A Segment group of referencing documents relating
                   to the specifications and values and where
                   necessary, their dates.

0950                  RFF, Reference
                      A segment identifying the referenced document by
                      its number and where appropriate, a line number
                      within that document.

0960                  DTM, Date/time/period
                      A segment specifying the date/time of the
                      referenced document. The specified date should
                      be in 'yymmdd' format, unless all parties agree
                      that there is a functional requirement for an
                      alternative format.


0970            Segment group 26:STA-DTM-SG27
                A group of segments to provide the necessary
                information for summary statistics with any related
                references and dates.

0980               STA, Statistics
                   A segment to specify the values required for
                   statistics including codes to define the type of
                   statistics and the measure unit employed.

0990               DTM, Date/time/period
                   A segment specifying the date, and when relevant,
                   the time of an activity identified by the date/time
                   qualifier, e.g. time frame of statistical period.


1000               Segment group 27:RFF-DTM
                   A Segment group of referencing documents relating
                   to the statistics and where necessary, their dates.

1010                  RFF, Reference
                      A segment identifying the referenced document by
                      its number and where appropriate, a line number
                      within that document.

1020                  DTM, Date/time/period
                      A segment specifying the date/time of the
                      referenced document. The specified date should
                      be in 'yymmdd' format, unless all parties agree
                      that there is a functional requirement for an
                      alternative format.


1030            Segment group 28:TEM-MEA-DTM-SG29
                A group of segments to provide details of the test
                methods, employed including any circumstances, test
                devices, references and dates.

1040               TEM, Test method
                   A segment to describe the nature of the test
                   performed.

1050               MEA, Measurements
                   A segment to provide the necessary values of the
                   various circumstances related to the tests, e.g.
                   temperature reading when test performed.

1060               DTM, Date/time/period
                   A segment specifying the date, and when relevant,
                   the time of an activity identified by the date/time
                   qualifier.


1070               Segment group 29:RFF-DTM
                   A Segment group of referencing documents relating
                   to the test method and where necessary, their
                   dates.

1080                  RFF, Reference
                      A segment identifying the referenced document by
                      its number and where appropriate, a line number
                      within that document.

1090                  DTM, Date/time/period
                      A segment specifying the date/time of the
                      referenced document. The specified date should
                      be in 'yymmdd' format, unless all parties agree
                      that there is a functional requirement for an
                      alternative format.


1100      Segment group 30:PRC-SG31-SG32
          A group of segments to allow process related quality data to
          be specified.

1110         PRC, Process identification
             A segment to specify the process/sub-process type and
             description to which the data is related.


1120         Segment group 31:NAD-LOC
             A group of segments identifying Names, Addresses and
             Locations relevant to the process.

1130            NAD, Name and address
                A segment identifying names and addresses of parties,
                in coded or clear form, and their function relevant
                for the process.

1140            LOC, Place/location identification
                A segment indicating more details regarding specific
                locations related to the party specified in the NAD-
                segment, e.g. internal site/building number.


1150         Segment group 32:CCI-PSD-SPS-DTM-FTX-SG33-SG34-SG36-SG38
             A group of segments to be used to define a class of
             properties, the individual properties within that class
             and the related data (e.g. discrete values, statistical
             information, test methods). When this segment group is
             used, the data is directly related to the product
             specified.

1160            CCI, Characteristic/class id
                To specify the general class and/or the individual
                properties on which the Quality Data is being
                reported. Note: within the CCI-segment Property class,
                coded (7059) or Measurement dimension, coded (6313) or
                Characteristic identification (7037) must be present.
                
                If Property class, coded (7059) AND Measurement
                dimension, coded (6313) are present, then
                Characteristic identification (7037) is not allowed.
                
                If only Property class, coded is used within the
                CCI-segment, then the individual properties must be
                specified within the related STA/MEA-segments.
                
                The data element Characteristic (7036) should only be
                used to enhance the meaning of the code value (e.g. if
                no specific code available and code value ZZ (mutually
                defined) is used then Description can be used to
                further describe the Product Characteristics.
                
                NB: The Class identification element in this segment
                is only used to specify the product characteristic
                class, e.g. Chemistry or Physical Dimensions.

1170            PSD, Physical sample description
                A segment to define the physical sample parameters
                associated with a test resulting in discrete
                measurements. If used in this position, the values
                only apply to data within the same analysis group.

1180            SPS, Sampling parameters for summary statistics
                A segment to define the sampling parameters associated
                with summary statistics reported. If used in this
                position, the values only apply to data within the
                same analysis group.

1190            DTM, Date/time/period
                A segment specifying the date, and when relevant, the
                time of an activity identified by the date/time
                qualifier, e.g. date/time, test performed.

1200            FTX, Free text
                A segment with free text information to give further
                clarification within Segment group 32: the Analysis
                Group.


1210            Segment group 33:RFF-DTM
                A segment group of referencing documents relating to
                the Analysis Section and where necessary, their dates,
                e.g. Purchase order, shipment note.

1220               RFF, Reference
                   A segment identifying the referenced document by
                   its number and where appropriate, a line number
                   within that document.

1230               DTM, Date/time/period
                   A segment specifying the date/time of the
                   referenced document.
                   The specified date should be in 'yymmdd' format,
                   unless all parties agree that there is a functional
                   requirement for an alternative format.


1240            Segment group 34:MEA-DTM-SG35
                A group of segments to allow measurement values or
                specification values to be specified along with their
                associated references and dates. The data element
                Measurement Application Qualifier (6311) indicates the
                type of the values.

1250               MEA, Measurements
                   A segment to specify discrete values, other
                   measurement results or specification values. These
                   values may be specified as a range and may be
                   qualified by the significance and/or the attribute
                   codes.

1260               DTM, Date/time/period
                   A segment specifying the date, and when relevant,
                   the time of an activity identified by the date/time
                   qualifier, e.g. test date/time.


1270               Segment group 35:RFF-DTM
                   A Segment group of referencing documents relating
                   to the specifications and values and where
                   necessary, their dates.

1280                  RFF, Reference
                      A segment identifying the referenced document by
                      its number and where appropriate, a line number
                      within that document.

1290                  DTM, Date/time/period
                      A segment specifying the date/time of the
                      referenced document. The specified date should
                      be in 'yymmdd' format, unless all parties agree
                      that there is a functional requirement for an
                      alternative format.


1300            Segment group 36:STA-DTM-SG37
                A group of segments to provide the necessary
                information for summary statistics with any related
                references and dates.

1310               STA, Statistics
                   A segment to specify the values required for
                   statistics including codes to define the type of
                   statistics and the measure unit employed.

1320               DTM, Date/time/period
                   A segment specifying the date, and when relevant,
                   the time of an activity identified by the date/time
                   qualifier, e.g. time frame of statistical period.


1330               Segment group 37:RFF-DTM
                   A Segment group of referencing documents relating
                   to the statistics and where necessary, their dates.

1340                  RFF, Reference
                      A segment identifying the referenced document by
                      its number and where appropriate, a line number
                      within that document.

1350                  DTM, Date/time/period
                      A segment specifying the date/time of the
                      referenced document. The specified date should
                      be in 'yymmdd' format, unless all parties agree
                      that there is a functional requirement for an
                      alternative format.


1360            Segment group 38:TEM-MEA-DTM-SG39
                A group of segments to provide details of the test
                methods, employed including any circumstances, test
                devices, references and dates.

1370               TEM, Test method
                   A segment to describe the nature of the test
                   performed.

1380               MEA, Measurements
                   A segment to provide the necessary values of the
                   various circumstances related to the tests, e.g.
                   temperature reading when test performed.

1390               DTM, Date/time/period
                   A segment specifying the date, and when relevant,
                   the time of an activity identified by the date/time
                   qualifier.


1400               Segment group 39:RFF-DTM
                   A Segment group of referencing documents relating
                   to the test method and where necessary, their
                   dates.

1410                  RFF, Reference
                      A segment identifying the referenced document by
                      its number and where appropriate, a line number
                      within that document.

1420                  DTM, Date/time/period
                      A segment specifying the date/time of the
                      referenced document. The specified date should
                      be in 'yymmdd' format, unless all parties agree
                      that there is a functional requirement for an
                      alternative format.

1430   UNT, Message trailer
       A service segment ending a message, giving the total number of
       segments in the message and the control reference number of the
       message.

4.2   Data segment index (Alphabetical sequence by tag)

          BGM Beginning of message
          CCI Characteristic/class id
          COM Communication contact
          CTA Contact information
          DTM Date/time/period
          FTX Free text
          GIN Goods identity number
          IMD Item description
          LIN Line item
          LOC Place/location identification
          MEA Measurements
          NAD Name and address
          PIA Additional product id
          PRC Process identification
          PSD Physical sample description
          QTY Quantity
          RFF Reference
          SPS Sampling parameters for summary statistics
          STA Statistics
          TEM Test method
          UNH Message header
          UNT Message trailer

Contents of D.95B