0. INTRODUCTION
This specification provides the definition of the Instruction
message (IFTMIN) to be used in Electronic Data Interchange
(EDI) between trading partners involved in administration,
commerce and transport.
1. SCOPE
This paper provides the definition of the Instruction Message
to be used in fulfilling the requirements of trading partners
in the transport chain worldwide, in the interchange of cargo
and transport related information using Electronic Data
Interchange (EDI).
This message is a single consignment based message, being
aligned with other single consignment based messages such as
the booking messages (IFTMBP, IFTMBF and IFTMBC), the
Instruction Contract Status Message (IFTMCS) and the Arrival
Notice Message (IFTMAN).
The single consignment based messages can be used by all modes
of transport for the forwarding and transport of goods from any
origin to any destination, regardless of route or prevailing
commercial practice.
These messages are suitable for the arrangement of the
transport of goods between all parties to the movement of the
consignment (including the consignor/shipper and consignee as
well as the forwarders, brokers, and carriers involved) as well
as providing the information necessary to perform that
transport and delivery of the goods.
They should be used in the same way by each mode of transport
when the requirements are common even if functionally similar
information is known by different names.
1.1 Functional Definition
A message from the party issuing an instruction regarding
forwarding/transport services for a consignment under
conditions agreed, to the party arranging the forwarding and/or
transport services.
1.2 Field of Application
This message may be applied for both national and international
trade. It is based on universal practice and is not dependent
on the type of business or industry.
1.3 Principles
The instruction results in a transport contract for a
consignment and is primarily meant for administrative purposes.
It will be the message from shipper to carrier or forwarder
containing the final details of the consignment for which
services are provided. The instruction message is the one and
only message which results in the actual contract which can
either be a document or an electronic contract.
If only one message will suffice in an exchange between a
shipper and a carrier/forwarder the instruction message should
be the one as this message is the only message that results in
a contract. The receiving party is to ascertain whether the
Instruction message is preceded by a Booking Firm message, to
be able to interpret the function as being an administrative
message only or an administrative and operational message.
- A consignment may contain several goods items.
- Goods items may or may not be containerized.
- A goods item may be transported in one or more containers,
and a single container may contain one or more goods items.
- One goods item may be related to one or more customs tariff
codes.
- Goods items related to one customs tariff code may be carried
in one or more containers.
- Goods items may reflect either the contractual or operational
description of the goods.
- A party to the movement of the consignment may book or order
transport for one or more goods items.
- A party to the movement of the consignment may book or issue
instructions of transport to be arranged for several goods
items by means of one or several of the following messages:
IFTMBP, IFTMBF, IFTMBC, IFTMIN, IFTMCS, IFTMAN.
- Pre-carriage (advanced haulage) and/or on-carriage
(destination haulage) of goods items or equipment within one
booking or instruction may take place in different steps, each
step specified with its own transport details group.
- Equipment may have other types of equipment attached to it,
e.g. a temperature control unit attached to a container.
- Equipment and/or goods items may be attached to or
transported on another load or transport device, which as such
may be attached to or transported on yet another load or
transport device, e.g. a container on a chassis on a rail-car.
- Transport devices, which have the ability of powered movement
on their own, are specified in the transport details group.
Other load or transport devices are specified as equipment.
- The expression of packaging for goods items can be expressed
at up to three levels.
A number of generic transport terms are used in this
specification, to be described as:
* MODE OF TRANSPORT: The method of transport used for the
conveyance of goods or persons, e.g. by rail, by road, by sea.
* MEANS OF TRANSPORT: The vehicle used for the transport of
goods or persons, e.g. aircraft, truck, vessel.
* TYPE OF MEANS OF TRANSPORT: The type of vehicle used in the
transport process, e.g. wide body, tank truck, passenger
vessel.
* EQUIPMENT: Material resources necessary to facilitate the
transport and handling of cargo. Transport equipment does under
the given circumstances not have the ability to move by its own
propulsion (e.g. sea container, trailer, unit load device,
pallet).
* TYPE OF EQUIPMENT: The type of material used, e.g. 40 feet
container, four way pallet, mafi trailer.
2. REFERENCES
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
Section 1.
3. TERMS AND DEFINITIONS
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
Section 2.
4. MESSAGE DEFINITION
4.1 Data Segment Clarification
This section should be read in conjunction with the Branching
Diagram and the Segment Table which indicate mandatory,
conditional and repeating requirements.
0010 | UNH, Message header
A service segment starting and uniquely identifying a message.
The message type code for the Instruction message is IFTMIN.
Note: Instruction messages conforming to this document must
contain the following data in segment UNH, composite S009:
Data element 0065 IFTMIN
0052 D
0054 96A
0051 UN
0020 BGM, Beginning of message
A segment to indicate the beginning of a message and to
transmit identifying number and type of the message.
0030 CTA, Contact information
A segment to identify a person or department to whom
communication should be directed.
0040 COM, Communication contact
A segment to identify a communication number of a person or
department to whom communication should be directed.
0050 DTM, Date/time/period
A segment to indicate a date and time applying to the whole
message, e.g., date and time of document issue.
0060 TSR, Transport service requirements
A segment to identify the contract, conditions of carriage,
services, and priority requirements for the transport.
0070 CUX, Currencies
A segment to indicate default currencies and exchange rates.
0080 MOA, Monetary amount
A segment to indicate a monetary value for entire consignment,
e.g. insured value, invoice amount, disbursements, etc.
0090 FTX, Free text
A segment to specify free form or processable supplementary
information, such as status of transport, remarks to be printed
on the transport documents (where required), consignment
remarks, insurance instructions, etc., or any other additional
information.
0100 CNT, Control total
A segment to specify totals for a consignment.
0110 DOC, Document/message details
A segment to indicate the number of document copies required
(such as the number of ocean Bill of Lading copies needed by
the customer).
0120 Segment group 1: LOC-DTM
A group of segments to specify locations and related
date(s)/time(s) which apply to the entire message, e.g. place
of transhipment.
0130 LOC, Place/location identification
A segment to identify a location applying to the entire
message.
0140 DTM, Date/time/period
A segment to indicate date(s) and time(s) relating to the
location.
0150 Segment group 2: TOD-LOC
A group of segments to specify terms of delivery and related
locations.
0160 TOD, Terms of delivery or transport
A segment to specify the applicable terms of delivery.
0170 LOC, Place/location identification
A segment to specify a location related to the terms of
delivery.
0180 Segment group 3: RFF-DTM
A group of segments containing a reference and constants which
apply to the entire message.
0190 RFF, Reference
A segment to express a reference which applies to the entire
message such as: the document/message number that is to be
updated by this very message (according to data element 1225
Message Function, Coded in segment BGM), booking reference,
order number, insurance contract, etc.
0200 DTM, Date/time/period
A segment to indicate date and time relating to the
reference.
0210 Segment group 4: GOR-DTM-LOC-SEL-FTX-SG5
A group of segments to identify customs and other governmental
procedures and required documents.
0220 GOR, Governmental requirements
A segment to indicate applicable governmental procedures
related to import, export and transport of the goods.
0230 DTM, Date/time/period
A segment to indicate date and time related to documents
and/or Customs- and/or governmental procedures for the
consignment (e.g.
date of issuing of Customs document, expiration date of
Customs document, etc.).
0240 LOC, Place/location identification
A segment to specify locations associated with Customs-
and/or governmental procedures for the consignment (e.g.
Customs office of exit, Customs office of destination,
etc.).
0250 SEL, Seal number
A segment to identify seals and seal issuer associated with
the Customs procedure and/or Customs document for the
consignment.
0260 FTX, Free text
A segment to provide supplementary governmental requirements
information.
0270 Segment group 5: DOC-DTM
A group of segments to specify required documents by
government.
0280 DOC, Document/message details
A segment to indicate a document required by government.
0290 DTM, Date/time/period
A segment to specify the date/time related to the
required document.
0300 | Segment group 6: CPI-RFF-CUX-LOC-MOA
A group of segments to indicate charge methodology which
applies to the entire message.
0310 CPI, Charge payment instructions
A segment to indicate default charge methodology.
0320 + RFF, Reference
A segment to indicate a reference relating to the CPI
segment, such as charge reference number.
0330 CUX, Currencies
A segment to specify the payment currency related to the
charge methodology.
0340 LOC, Place/location identification
A segment to identify the place of charge collection.
0350 MOA, Monetary amount
A segment to identify the monetary amount associated with
the charges.
0360 Segment group 7: TCC-LOC-FTX-CUX-PRI-EQN-PCD-MOA-QTY
A group of segments to specify charge calculations associated
with the transport.
0370 TCC, Transport charge/rate calculations
A segment to specify charge.
0380 LOC, Place/location identification
A segment to indicate a location.
0390 FTX, Free text
A segment to specify processable supplementary information
associated with charge.
0400 CUX, Currencies
A segment to specify currencies associated with charge.
0410 PRI, Price details
A segment to specify price details such as price (e.g. 100
dollar) and unit price basis (e.g. per 1000 kilogram).
0420 EQN, Number of units
A segment to specify the number of units to which the unit
price basis applies.
0430 PCD, Percentage details
A segment to indicate the applicable reduction or surcharge
percentage details.
0440 MOA, Monetary amount
A segment to specify a monetary amount, such as prepaid
amount, discount or total amount.
0450 QTY, Quantity
A segment to indicate a quantity, for example actual weight,
declared weight or chargeable weight.
0460 Segment group 8: TDT-DTM-TSR-SG9-SG10
A group of segments to indicate details of the movement of
goods such as mode and means of transport, locations,
departure, and arrival date(s) and time(s).
0470 TDT, Details of transport
A segment to indicate information related to a certain stage
of the transport, such as mode, means and carrier.
0480 DTM, Date/time/period
A segment to indicate departure/arrival date and time.
0490 TSR, Transport service requirements
A segment to identify contract, conditions of carriage,
services, priority requirements for this stage of transport.
0500 Segment group 9: LOC-DTM
A group of segments to specify a location and date/time
related to this leg of transport.
0510 LOC, Place/location identification
A segment to indicate a location such as origin,
destination, stop off, etc. related to this leg of
transport.
0520 DTM, Date/time/period
A segment to specify a date/time related to the location,
such as arrival date/time of a means of transport at a
specific location.
0530 Segment group 10:RFF-DTM
A group of segments to specify an additional reference
related to the stage of the transport.
0540 RFF, Reference
A segment to specify the additional reference.
0550 DTM, Date/time/period
A segment to identify date and time relating to the
reference.
0560 Segment group 11:NAD-LOC-MOA-SG12-SG13-SG14-SG15-SG16-SG17
A group of segments to identify a party, related references,
locations contacts, required documents, and charges to be paid
by the party.
0570 NAD, Name and address
A segment to identify the party's name, address, and
function.
0580 LOC, Place/location identification
A segment to indicate location where a specific function
will be performed.
0590 MOA, Monetary amount
A segment to identify the monetary amount associated with
the party.
0600 Segment group 12:CTA-COM
A group of segments identifying a contact and its
communications related to the party.
0610 CTA, Contact information
A segment to identify a person or department within a
party.
0620 COM, Communication contact
A segment to identify a communication number of a person
or department to whom communication should be directed.
0630 Segment group 13:DOC-DTM
A group of segments to identify required documents.
0640 DOC, Document/message details
A segment to identify a document required of, by or for
the party.
0650 DTM, Date/time/period
A segment to identify date and time relating to the
reference.
0660 Segment group 14:TCC-PRI-EQN-PCD-MOA-QTY
A group of segments to specify charges associated with the
party.
0670 TCC, Transport charge/rate calculations
A segment to specify charges associated with the party.
0680 PRI, Price details
A segment to specify price details such as price (e.g.
100 dollar) and unit price basis (e.g. per 1000
kilogram).
0690 EQN, Number of units
A segment to specify the number of units to which the
unit price basis applies.
0700 PCD, Percentage details
A segment to indicate the applicable reduction or
surcharge percentage details.
0710 MOA, Monetary amount
A segment to specify a monetary amount, such as prepaid
amount, discount or total amount.
0720 QTY, Quantity
A segment to indicate a quantity, for example actual
weight, declared weight or chargeable weight.
0730 Segment group 15:RFF-DTM
A group of segments to specify a reference related to the
party.
0740 RFF, Reference
A segment to identify a reference used by a party.
0750 DTM, Date/time/period
A segment to indicate date and time relating to the
reference.
0760 | Segment group 16:CPI-RFF-CUX-LOC-MOA
A group of segments to identify the charge and its amount to
be paid by the party.
0770 CPI, Charge payment instructions
A segment to identify default charge methodology.
0780 + RFF, Reference
A segment to indicate a reference relating to the CPI
segment, such as charge reference number.
0790 CUX, Currencies
A segment to indicate payment currency related to the
charge methodology.
0800 LOC, Place/location identification
A segment to identify the place of charge collection.
0810 MOA, Monetary amount
A segment to identify the monetary amount associated with
the charges.
0820 Segment group 17:TSR-RFF-LOC-TPL-FTX
A group of segments to specify a transport service
requirement and its associated details (such as applicable
commercial agreement) related to the party.
0830 TSR, Transport service requirements
A segment to specify a required service for the
transport, such as re-icing.
0840 RFF, Reference
A segment to identify a commercial agreement related to
the service requirement.
0850 LOC, Place/location identification
A segment to indicate the location where the required
service must be performed, such as place of re-icing.
0860 TPL, Transport placement
A segment to identify the means of transport to which the
service requirement applies.
0870 FTX, Free text
A segment to provide any additional information related
to the service requirement.
0880 Segment group 18:GID-HAN-TMP-RNG-TMD-LOC-MOA-PIA-FTX-SG19-GDS-
SG20-SG21-SG22-SG23-SG24-SG25-SG27-SG29-SG31-
SG32
A group of segments to describe the goods items for which
transport is undertaken.
0890 GID, Goods item details
A segment to identify a goods item for which transport is
undertaken. A goods item can be identified by up to three
levels of packaging.
0900 HAN, Handling instructions
A segment to specify handling instructions relating to the
goods item.
0910 TMP, Temperature
A segment to specify a temperature setting for a goods item.
0920 RNG, Range details
A segment to specify a temperature range setting for a goods
item.
0930 TMD, Transport movement details
A segment to specify transport movement details for a goods
item.
0940 LOC, Place/location identification
A segment to specify a country associated with a goods item,
such as country of origin, or country of destination.
0950 MOA, Monetary amount
A segment to specify a monetary amount associated with a
goods item, such as declared value, FOB value, etc.
0960 PIA, Additional product id
A segment to specify article numbers.
0970 FTX, Free text
A segment to specify processable supplementary information
relating to the goods item.
0980 Segment group 19:NAD-DTM
A group of segments to identify different places of
collection and/or delivery for the goods item.
0990 NAD, Name and address
A segment to specify an address of a place of collection
or delivery for a goods item.
1000 DTM, Date/time/period
A segment to indicate date and time relating to the place
of collection or delivery.
1010 GDS, Nature of cargo
A segment to describe the nature of cargo.
1020 Segment group 20:MEA-EQN
A group of segments to specify measurements applicable to a
goods item.
1030 MEA, Measurements
A segment to specify measurements, other than dimensions,
applicable to a goods item.
1040 EQN, Number of units
A segment to specify the number of equipment units to
each of which the given measurement applies.
1050 Segment group 21:DIM-EQN
A group of segments to specify dimensions applicable to a
goods item.
1060 DIM, Dimensions
To specify dimensions applicable to a goods item.
1070 EQN, Number of units
A segment to specify the number of equipment units to
each of which the given dimension applies.
1080 Segment group 22:RFF-DTM
A group of segments to identify references to a goods item.
1090 RFF, Reference
A segment to identify a reference to a goods item.
1100 DTM, Date/time/period
A segment to indicate date and time relating to the
reference.
1110 Segment group 23:PCI-RFF-DTM-GIN
A group of segments to specify marks and numbers of a goods
item.
1120 PCI, Package identification
A segment to specify marks and numbers of a goods item.
1130 RFF, Reference
A segment to identify a reference relating to the marks
and numbers.
1140 DTM, Date/time/period
A segment to identify date and time of the reference.
1150 GIN, Goods identity number
To specify identity numbers related to transport units
such as batch numbers or serial numbers.
1160 Segment group 24:DOC-DTM
A group of segments to specify documents and associated
date(s) and time(s) for a goods item.
1170 DOC, Document/message details
A segment to specify a document prepared for a goods
item.
1180 DTM, Date/time/period
A segment to associate date and time with the prepared
document.
1190 Segment group 25:GOR-DTM-LOC-SEL-FTX-SG26
A group of segments to identify Customs and other
governmental procedures and required documents relating to
the goods item.
1200 GOR, Governmental requirements
A segment to indicate applicable governmental procedures
related to import, export and transport of the goods
item.
1210 DTM, Date/time/period
A segment to indicate date and time relating to documents
and/or Customs- and/or governmental procedures for the
goods item.
1220 LOC, Place/location identification
A segment to specify locations associated with Customs-
and/or governmental procedures.
1230 SEL, Seal number
A segment to specify locations associated with Customs-
and/or governmental procedures.
1240 FTX, Free text
A segment to provide additional governmental requirements
information for the goods item.
1250 Segment group 26:DOC-DTM
A group of segments to specify required documents by
government for the goods item.
1260 DOC, Document/message details
A segment to identify a document required by
government.
1270 DTM, Date/time/period
A segment to specify the date/time related to the
required document.
1280 Segment group 27:TPL-SG28
A group of segments to identify transport details and
associated measurements for a goods item. This group may be
repeated to indicate the different phases of the movement.
1290 TPL, Transport placement
A segment to identify transport details for a goods item.
1300 Segment group 28:MEA-EQN
A group of segments to identify measurements.
1310 MEA, Measurements
A segment to specify the distribution of a goods item
among the transport details.
1320 EQN, Number of units
A segment to specify the number of equipment units to
each of which the given measurement applies.
1330 Segment group 29:SGP-SG30
A group of segments to specify the distribution of a goods
item among the transport equipment.
1340 SGP, Split goods placement
A segment to identify the equipment in which goods are
transported.
1350 Segment group 30:MEA-EQN
A group of segments to identify measurements.
1360 MEA, Measurements
A segment to specify measurements of that portion of
the goods item in the equipment.
1370 EQN, Number of units
A segment to specify the number of equipment units to
each of which the given measurement applies.
1380 Segment group 31:TCC-CUX-PRI-EQN-PCD-MOA-QTY-LOC
A group of segments to specify charge associated with the
goods item.
1390 TCC, Transport charge/rate calculations
A segment to specify charge associated with the goods
item.
1400 CUX, Currencies
A segment to specify currencies associated with charge.
1410 PRI, Price details
A segment to specify price details such as price (e.g.
100 dollar) and unit price basis (e.g. per 1000
kilogram).
1420 EQN, Number of units
A segment to specify the number of units to which the
unit price basis applies.
1430 PCD, Percentage details
A segment to indicate the applicable reduction or
surcharge percentage details.
1440 MOA, Monetary amount
A segment to specify a monetary amount, such as prepaid
amount, discount or total amount.
1450 QTY, Quantity
A segment to indicate a quantity, for example actual
weight, declared weight or chargeable weight.
1460 LOC, Place/location identification
A segment to indicate location where a specific function
will be performed.
1470 Segment group 32:DGS-FTX-SG33-SG34-SG35
A group of segments to specify dangerous goods details
related to the goods item. One goods item may be in
different dangerous goods classes.
1480 DGS, Dangerous goods
A segment to indicate the class of dangerous goods,
packing group, etc.
1490 FTX, Free text
A segment to specify the dangerous goods technical name
and to specify any additional dangerous goods
information.
1500 Segment group 33:CTA-COM
A group of segments to identify a contact to whom
communication regarding the dangerous goods can be
directed.
1510 CTA, Contact information
A segment to identify a person or department.
1520 COM, Communication contact
A segment to identify a communication number of a
person or department.
1530 Segment group 34:MEA-EQN
A group of segments to identify dangerous goods
measurements.
1540 MEA, Measurements
A segment to specify measurements of the dangerous
goods.
1550 EQN, Number of units
A segment to specify the number of equipment units to
each of which the given measurement applies.
1560 Segment group 35:SGP-SG36
A group of segments to specify the distribution of the
dangerous goods among the transport equipment.
1570 SGP, Split goods placement
A segment to identify the equipment in which the
dangerous goods are transported.
1580 Segment group 36:MEA-EQN
A group of segments to identify dangerous goods
measurements.
1590 MEA, Measurements
A segment to specify measurements of that portion
of the dangerous goods in the equipment.
1600 EQN, Number of units
A segment to specify the number of equipment units
to each of which the given measurement applies.
1610 Segment group 37:EQD-EQN-TMD-MEA-DIM-SEL-TPL-HAN-TMP-FTX-SG38-
SG39-SG41
A group of segments to specify equipment in which goods are
transported.
1620 EQD, Equipment details
A segment to specify equipment, and equipment size and type
used in the transport.
1630 EQN, Number of units
A segment to specify number of pieces of equipment required.
1640 TMD, Transport movement details
A segment to specify transport movement details for the
equipment.
1650 MEA, Measurements
A segment to specify measurements, other than dimensions,
associated with the equipment, such as weight.
1660 DIM, Dimensions
A segment to specify dimensions applicable to equipment.
1670 SEL, Seal number
A segment to identify seal and seal issuer associated with
the equipment.
1680 TPL, Transport placement
A segment to identify transport details for the equipment.
1690 HAN, Handling instructions
A segment to specify handling instructions for specified
equipment.
1700 TMP, Temperature
A segment to indicate a temperature setting for the
equipment.
1710 FTX, Free text
A segment to specify processable supplementary information
associated with the equipment.
1720 Segment group 38:TCC-PRI-EQN-PCD-MOA-QTY
A group of segments to specify charges associated with the
equipment.
1730 TCC, Transport charge/rate calculations
A segment to specify a charge associated with the
equipment.
1740 PRI, Price details
A segment to specify price details such as price (e.g.
100 dollar) and unit price basis (e.g. per 1000
kilogram).
1750 EQN, Number of units
A segment to specify the number of units to which the
unit price basis applies.
1760 PCD, Percentage details
A segment to indicate the applicable reduction or
surcharge percentage details.
1770 MOA, Monetary amount
A segment to specify a monetary amount, such as prepaid
amount, discount or total amount.
1780 QTY, Quantity
A segment to indicate a quantity, for example actual
weight, declared weight or chargeable weight.
1790 Segment group 39:NAD-DTM-SG40
A group of segments to identify different equipment pick-up
or drop-off places.
1800 NAD, Name and address
A segment to specify a pick-up or drop-off address.
1810 DTM, Date/time/period
A segment to indicate date and time relating to pick-up
or drop-off.
1820 Segment group 40:CTA-COM
A group of segments to identify a contact and its
communications related to the party.
1830 CTA, Contact information
A segment to specify a contact name associated with a
specified equipment positioning or collection address.
1840 COM, Communication contact
A segment to specify a communication number related to
the contact.
1850 Segment group 41:EQA-EQN
A group of segments to specify the attached equipment and
related number of pieces.
1860 EQA, Attached equipment
A segment to identify attached or related equipment such
as a chassis attached to a container.
1870 EQN, Number of units
A segment to specify number of pieces of equipment
required.
1880 UNT, Message trailer
A service segment ending a message, giving the total number of
segments in the message and the control reference number of the
message.
4.2 Data segment index (Alphabetical sequence by tag)
BGM Beginning of message
CNT Control total
COM Communication contact
CPI Charge payment instructions
CTA Contact information
CUX Currencies
DGS Dangerous goods
DIM Dimensions
DOC Document/message details
DTM Date/time/period
EQA Attached equipment
EQD Equipment details
EQN Number of units
FTX Free text
GDS Nature of cargo
GID Goods item details
GIN Goods identity number
GOR Governmental requirements
HAN Handling instructions
LOC Place/location identification
MEA Measurements
MOA Monetary amount
NAD Name and address
PCD Percentage details
PCI Package identification
PIA Additional product id
PRI Price details
QTY Quantity
RFF Reference
+ RFF Reference
RNG Range details
SEL Seal number
SGP Split goods placement
TCC Transport charge/rate calculations
TDT Details of transport
TMD Transport movement details
TMP Temperature
TOD Terms of delivery or transport
TPL Transport placement
TSR Transport service requirements
UNH Message header
UNT Message trailer