0. INTRODUCTION
This specification provides the definition of the Container
gate-in/gate-out report message (CODECO) to be used in
Electronic Data Interchange (EDI) between trading partners
involved in administration, commerce and transport.
1. SCOPE
1.1 Functional Definition
A message by which a terminal, depot, etc. confirms that the
containers specified have been delivered or picked up by the
inland carrier (road, rail or barge). This message can also be
used to report internal terminal container movements (excluding
loading and discharging the vessel) and to report the change in
status of container(s) without those containers having
physically been moved.
This message is part of a total set of container-related
messages. These messages serve to facilitate the intermodal
handling of containers by streamlining the information
exchange. The business scenario for the container messages is
clarified in a separate document, called: 'Guide to the
scenario of EDIFACT container messages'.
1.2 Field of Application
The Container gate-in/gate-out report message may be used for
both national and international applications. It is based on
universal practice related to administration, commerce and
transport, and is not dependent on the type of business or
industry.
1.3 Principles
Business area:
Pre- and on-carriage transport of containers/equipment.
Sending functions include:
Container depot, Inland terminal, Container freight station
Receiving functions include:
Shipping agent, Logistic center, Shipper (copy), Freight
forwarder (copy) and Inland carrier (copy)
In the context of the 'Guide to the scenario of EDIFACT
container messages' (as referred to at the start of section 1)
the following guidelines, rules and functionality apply to this
Container gate-in/gate-out report message:
* The message contents can be uniquely identified by a
combination of the following data elements:
- ordering customer, coded (NAD)
- ordering customer agent, coded (NAD)
- container announcement reference (being the release order
reference number or the acceptance order reference number)
(RFF)
The ordering customer agent, coded is needed to supplement the
unique identification only in the next situation: the agent
acts on behalf of several ordering customers issuing the same
range of reference numbers for each customer.
E.g. the ship's agent acts on behalf of several shipping lines
issuing for each shipping line the same range of numbers.
* A copy of this message may be sent e.g. to the shipper,
freight forwarder, the inland waterways and rail carriers,
according to the communication addresses as mentioned in the
Container announcement.
* One message may contain several containers.
* A supplementary container reference (container sequence
number) is used to refer to the information of the container(s)
in the Container announcement, if the container prefix and
number was not completed in that message.
* An indicator for the transport status (i.e. export, import,
transhipment or continental) is to be completed on container
level (EQD-segment).
* One shipping line can be specified on message level.
* The seagoing vessel and sea voyage number can be specified
on message level.
* Inland transport details can be specified for each
individual container.
* For each container its place of discharge or its position
of loading (stowage cell) in/on the means of inland transport
can be specified.
* In case of export the port of discharge and any port of
transhipment can be specified for each individual container.
* The date/time of pick-up and final address of positioning
or the date/time of delivery must be given for each container.
* For each container seals can be specified affixed by the
shipper, container freight station, terminal, sea carrier and
Customs.
2. REFERENCES
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
Section 1.
3. TERMS AND DEFINITIONS
3.1 Standard terms and definitions
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
Section 2.
4. MESSAGE DEFINITION
4.1 Data Segment Clarification
This section should be read in conjunction with the Segment
Table which indicate mandatory, conditional and repeating
requirements.
0010 UNH, Message header
A service segment starting and uniquely identifying a message.
The message type code for the Container gate-in/gate-out report
message is CODECO.
Note: Container gate-in/gate-out report messages conforming to
this document must contain the following data in segment UNH,
composite S009:
Data element 0065 CODECO
0052 D
0054 98A
0051 UN
0020 BGM, Beginning of message
A segment to indicate the beginning of a message and to
transmit identifying number and the further specification of
the message type (in data element 1001: Document/message name,
coded), such as Gate-in report, Gate-out report.
0030 DTM, Date/time/period
A segment to indicate a date and/or time applying to the whole
message, such as date and time of document or message issue.
0040 FTX, Free text
A segment to specify free form or processable supplementary
information, such as:
- change information
0050 Segment group 1: RFF-DTM
A group of segments to specify a reference relating to the
whole message, and its date and/or time.
0060 RFF, Reference
A segment to express a reference which applies to the entire
message, such as:
- reference to previous message
- container announcement reference number
- release order reference
- acceptance order reference
0070 DTM, Date/time/period
A segment to indicate date and/or time related to the
reference.
0080 Segment group 2: TDT-RFF-LOC-DTM
A group of segments to indicate information relating to the
main carriage stage of the transport (sea).
0090 TDT, Details of transport
A segment to indicate transport details related to the main
carriage stage of the transport (sea), such as carrier/liner
service.
0100 RFF, Reference
A segment to provide a reference for the liner service, such
as:
- conference
- marketing organization
- syndicate
- vessel sharing agreement
0110 LOC, Place/location identification
A segment to indicate a place/port corresponding to the main
carriage stage.
0120 DTM, Date/time/period
A segment to indicate a date/time relating to the main
carriage.
0130 Segment group 3: NAD-SG4
A group of segments to identify a party and/or addresses and
related contacts.
0140 NAD, Name and address
A segment to identify the party's name and address, and
function, such as:
- message recipient
- message sender
- ordering customer
- ordering customer agent
0150 Segment group 4: CTA-COM
A group of segments to identify a contact and its
communications related to the party.
0160 CTA, Contact information
A segment to identify a person or department of a message
sender and/or message recipient, such as:
- information contact
0170 COM, Communication contact
A segment to identify a communication number of a person
or department to whom communication should be directed.
0180 Segment group 5: GID-HAN-FTX-PIA-MEA-TMP-RNG-SGP-SG6
A group of segments to describe the goods items (to be) stuffed
in or (to be) stripped from the containers.
0190 GID, Goods item details
A segment to identify a goods item (to be) stuffed in or (to
be) stripped from the containers.
0200 HAN, Handling instructions
A segment to specify handling instructions relating to the
goods item, such as:
- hazardous cargo
- off-dimensions
- Customs clearance
0210 FTX, Free text
A segment to describe the goods item or to provide special
instructions.
0220 PIA, Additional product id
A segment to identify a commodity code.
0230 MEA, Measurements
A segment to specify a measurement, other than dimensions,
for the goods item.
0240 TMP, Temperature
A segment to specify a temperature setting for a goods item.
0250 RNG, Range details
A segment to specify a temperature range setting for a goods
item.
0260 SGP, Split goods placement
A segment to identify a container in which goods are
transported.
0270 | Segment group 6: DGS-FTX-SG7
A group of segments to specify dangerous goods details
related to the goods item. One goods item may be in
different dangerous goods classes.
0280 DGS, Dangerous goods
A segment to indicate the dangerous goods regulations for
the corresponding mode of transport, class of dangerous
goods, additional dangerous goods code, UN-number and
shipment flash point.
0290 FTX, Free text
A segment to specify supplementary details related to the
dangerous goods, such as:
- dangerous goods technical name
- dangerous goods additional information
0300 + Segment group 7: CTA-COM
A segment group to specify contact information including
communication details regarding the dangerous goods.
0310 + CTA, Contact information
A segment to identify a person or department to be
contacted regarding the dangerous goods.
0320 + COM, Communication contact
A segment to specify communication details of the
contact specified in the CTA segment.
0330 | Segment group 8: EQD-RFF-TMD-DTM-LOC-MEA-DIM-SEL-FTX-PCD-EQA-
COD-HAN-SG9-SG10-NAD
A group of segments to specify containers in which goods are
transported.
0340 EQD, Equipment details
A segment to specify a container, container size and type
used in the transport, and full/empty indication.
0350 RFF, Reference
A segment to specify the identifying number associated with
the container, such as:
- container sequence number
- booking reference number (sea)
0360 TMD, Transport movement details
A segment to indicate a Full Container Load (FCL) or a Less
than Full Container Load (LCL).
0370 DTM, Date/time/period
A segment to indicate date and time relating to the delivery
of a container:
- actual equipment positioning date and/or time
0380 LOC, Place/location identification
A segment to specify ports/locations associated with the
transport of a container, such as:
- stowage cell
- place of discharge
0390 MEA, Measurements
A segment to specify measurement, other than dimensions,
associated with the container, such as:
- gross weight
0400 DIM, Dimensions
A segment to specify dimensions applicable to the container,
such as:
- external equipment dimensions
0410 SEL, Seal number
A segment to identify seal and seal issuer associated with
the container, such as shipper, consolidator, carrier (sea),
Customs or terminal operator.
0420 FTX, Free text
A segment to specify processable supplementary information
associated with the container, such as:
- damage remarks
0430 PCD, Percentage details
A segment to specify percentages related to the equipment
such as percentage humidity.
0440 EQA, Attached equipment
A segment to identify related container and means of
transport details (rail), such as:
- rail car
0450 + COD, Component details
A segment to specify the details of the components of
transport equipment.
0460 HAN, Handling instructions
A segment to specify handling instructions related to the
container equipment.
0470 Segment group 9: DAM-COD
A group of segments to specify damage details related to the
equipment.
0480 DAM, Damage
A segment to specify equipment damages, such as the point
of the damage on the equipment, and the type of damage.
0490 COD, Component details
A segment to specify component details of the damaged
equipment.
0500 Segment group 10:TDT-LOC-DTM
A group of segments to indicate details of the movement of
containers by sea and by inland carriers, such as mode and
means of transport and locations.
0510 TDT, Details of transport
A segment to indicate information related to the inland
transport stage (road, rail or inland water), such as
mode of transport, identification of the means of
transport and inland carrier.
0520 LOC, Place/location identification
A segment to specify ports/locations associated with
inland transport of a container, such as:
- place of departure
- place of arrival
0530 DTM, Date/time/period
A segment to specify a date/time relating to the
transport details, such as arrival or departure
date/time.
0540 NAD, Name and address
A segment to specify the actual address where a piece of
equipment is to be delivered finally (final place of
positioning).
0550 CNT, Control total
A segment to specify the number of containers in the message,.
0560 UNT, Message trailer
A service segment ending a message, giving the total number of
segments in the message and the control reference number of the
message.
4.2 Data segment index (Alphabetical sequence by tag)
BGM Beginning of message
CNT Control total
COD Component details
COM Communication contact
CTA Contact information
DAM Damage
DGS Dangerous goods
DIM Dimensions
DTM Date/time/period
EQA Attached equipment
EQD Equipment details
FTX Free text
GID Goods item details
HAN Handling instructions
LOC Place/location identification
MEA Measurements
NAD Name and address
PCD Percentage details
PIA Additional product id
RFF Reference
RNG Range details
SEL Seal number
SGP Split goods placement
TDT Details of transport
TMD Transport movement details
TMP Temperature
UNH Message header
UNT Message trailer
Contents of CODECO