United Nations Directories
for Electronic Data Interchange for
Administration, Commerce and Transport



 UN/EDIFACT

Message Type : RELIST Version : D Release : 01A Contr. Agency: UN Revision : 1 Date : 2000-10-26 SOURCE: D9 Insurance (SWG) CONTENTS Reinsured objects list message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table ---------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction ---------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Reinsured objects list message (RELIST) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE 1.1 Functional definition The RELIST provides partners involved in the placing of a reinsurance contract or endorsement structured details on individual items to be reinsured (partly for facultative risks); this generic item list can give details on any type of item, ranging from individual vessels, buildings, industrial sites, aircraft to exhibitions, fleets and groups of buildings or employees to name a few. 1.2 Field of application The Reinsured objects list message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles As RELIST message is a supporting message to the RECORD message it has therefore the same main structure (header, contract identification, subdivisions). Per subdivision, a set of generic and specific segments have been grouped to report any relevant and structural information relating to individual risks, such as type of aircraft or vessel, category, year, built, relevant measurements, etc. RELIST is one of a complimentary pair of messages for the placing of reinsurance business. The core business data for the contract is carried in the message RECORD whilst RELIST carries details of all the items covered under the terms of the contract. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. 0010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Reinsured objects list message is RELIST. Note: Reinsured objects list messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 RELIST 0052 D 0054 01A 0051 UN 0020 BGM, Beginning of message To specify name and reference of the message. 0030 DTM, Date/time/period To specify dates relating to the transaction and the contract version. 0040 AGR, Agreement identification To specify the placing stage. 0050 RFF, Reference To specify the risk reference. 0060 Segment group 1: PNA-ATT-RFF-SG2 To specify parties related to the transaction, their references, contacts and communication means. 0070 PNA, Party identification To specify the sender and receiver of the transaction, and optionally the information originator (in case the message is simply passed on) and third parties that will receive a courtesy copy or to whom this message needs to be distributed by the receiver. 0080 ATT, Attribute To describe the business function of the party named. 0090 RFF, Reference To specify party specific references to the contract. 0100 Segment group 2: CTA-COM This group is used to specify contact persons or departments within the named party. 0110 CTA, Contact information To specify the contact within the named party. 0120 COM, Communication contact To specify the means of communicating with the named party contact. 0130 Segment group 3: IDE-SG4 To identify the contract or section to which the reinsured object(s) pertain. 0140 IDE, Identity To identify the section that the reinsured object/person relates to, or the contract. 0150 Segment group 4: ROD-RFF-FTX-PNA-DTM-QTY-NAT-SG5-SG7-SG8- SG9 To identify the reinsured object and all its relevant characteristics. 0160 ROD, Risk object type To identify the type of reinsured object. 0170 RFF, Reference Identification of the reinsured object via one or more references. 0180 FTX, Free text To give textual details regarding the reinsured object. 0190 PNA, Party identification To name the reinsured party and/or to specify parties related to the reinsured object. 0200 DTM, Date/time/period To express dates and time indications relating to the reinsured object (including age). 0210 QTY, Quantity To express quantities relating to the reinsured object or person. 0220 NAT, Nationality To express the nationality(ies) of a person or the flag of a conveyance. 0230 Segment group 5: PER-SG6 This group is used to specify any period relating to the reinsured object or person - in particular various coverage periods. 0240 PER, Period related details To specify the main period details. 0250 Segment group 6: DTM-GEI This group allows specification of dates or durations related to the coverage period. 0260 DTM, Date/time/period To indicate dates and/or duration for the contract coverage. One repeat of the date/time/period segment will typically be used to render the 'start date' of the period. It can however also be used to specify the period duration. The other repeat is typically to be used to render the end date of the period. In case one repeat was used to specify the duration, then the other one will be used to specify the (estimated) end date/time. 0270 GEI, Processing information To give date or period related indicators such as 'date included', 'date not known' etc. 0280 Segment group 7: ADR-DTM To express the address(es) of the reinsured person or object. In case of cargo risks (including exhibitions and concerts), each location may be linked to dates or periods. 0290 ADR, Address To specify the location or address of the reinsured object or person. 0300 DTM, Date/time/period To express dates and periods related to the location. 0310 Segment group 8: ATT-APP-DTM-PCD To specify the type of activity(-ies) the reinsured object or person is involved in and its applicability. Per activity, the time spent on a yearly basis can be expressed either as a number of time units or as a percentage of the total. 0320 ATT, Attribute To describe the activity of the reinsured object or person. 0330 APP, Applicability To specify the applicability of this activity in relation to the contract, such as excluded. 0340 DTM, Date/time/period To express the activity as a number of time units per year. 0350 PCD, Percentage details To express the activity as a percentage of the total per year (total = 100%). 0360 Segment group 9: PRV-APP-MOA-RTE-DTM-QTY-ATT-SG10 To express coverages, deductibles, deductions and premiums related to a specific reinsured object or person. 0370 PRV, Proviso details To identify the proviso for which details will be specified. 0380 APP, Applicability To specify the applicability of the proviso in relation to the contract. 0390 MOA, Monetary amount To express the proviso as an amount. 0400 RTE, Rate details To express the proviso as a rate. 0410 DTM, Date/time/period To express dates, times and periods related to the proviso. 0420 QTY, Quantity To express quantities related to the proviso. 0430 ATT, Attribute To specify attributes of the proviso, such as type of activity, origin of business and class of business. 0440 Segment group 10: BAS-APP A group of segments to specify the basis for the proviso and give details of how the basis is to be applied. 0450 BAS, Basis To specify one basis for the proviso, such as deduction basis, premium basis. 0460 APP, Applicability To specify how the basis has been applied. 0470 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) ADR Address AGR Agreement identification APP Applicability ATT Attribute BAS Basis BGM Beginning of message COM Communication contact CTA Contact information DTM Date/time/period FTX Free text GEI Processing information IDE Identity MOA Monetary amount NAT Nationality PCD Percentage details PER Period related details PNA Party identification PRV Proviso details QTY Quantity RFF Reference ROD Risk object type RTE Rate details UNH Message header UNT Message trailer

4.3 Message structure 4.3.1 Segment table Pos Tag Name S R 0010 UNH Message header M 1 0020 BGM Beginning of message M 1 0030 DTM Date/time/period M 9 0040 AGR Agreement identification M 1 0050 RFF Reference M 1 0060 ----- Segment group 1 ------------------ M 99----------+ 0070 PNA Party identification M 1 | 0080 ATT Attribute C 1 | 0090 RFF Reference C 9 | | 0100 ----- Segment group 2 ------------------ C 9----------+| 0110 CTA Contact information M 1 || 0120 COM Communication contact C 9----------++ 0130 ----- Segment group 3 ------------------ M 99----------+ 0140 IDE Identity M 1 | | 0150 ----- Segment group 4 ------------------ M 999--------+| 0160 ROD Risk object type M 1 || 0170 RFF Reference C 9 || 0180 FTX Free text C 9 || 0190 PNA Party identification C 99 || 0200 DTM Date/time/period C 9 || 0210 QTY Quantity C 9 || 0220 NAT Nationality C 9 || || 0230 ----- Segment group 5 ------------------ C 9---------+|| 0240 PER Period related details M 1 ||| ||| 0250 ----- Segment group 6 ------------------ C 2--------+||| 0260 DTM Date/time/period M 1 |||| 0270 GEI Processing information C 1--------++|| || 0280 ----- Segment group 7 ------------------ C 9---------+|| 0290 ADR Address M 1 ||| 0300 DTM Date/time/period C 9---------+|| || 0310 ----- Segment group 8 ------------------ C 99--------+|| 0320 ATT Attribute M 1 ||| 0330 APP Applicability C 1 ||| 0340 DTM Date/time/period C 9 ||| 0350 PCD Percentage details C 9---------+|| || 0360 ----- Segment group 9 ------------------ C 9---------+|| 0370 PRV Proviso details M 1 ||| 0380 APP Applicability C 1 ||| 0390 MOA Monetary amount C 9 ||| 0400 RTE Rate details C 9 ||| 0410 DTM Date/time/period C 9 ||| 0420 QTY Quantity C 9 ||| 0430 ATT Attribute C 99 ||| ||| 0440 ----- Segment group 10 ------------------ C 9--------+||| 0450 BAS Basis M 1 |||| 0460 APP Applicability C 1--------++++ 0470 UNT Message trailer M 1

Copyright 1995-2000 United Nations, all rights reserved
 
UN Economic Commission for Europe
Palais des Nations, CH-1211 Geneva 10, Switzerland
Tel: +41-22 917 2773 Fax: +41-22 917 0037 E-mail: TradeMaster@unece.org
 
UN/EDIFACT Directories