United Nations Directories for Electronic Data Interchange for
Administration, Commerce and Transport
UN/EDIFACT
United Nations Directories for Electronic Data Interchange for |
Message Type : CONDRA
Version : D
Release : 01C
Contr. Agency: UN
Revision : 3
Date : 2001-11-07
SOURCE: D7 Architecture, Engineering and Construction (SWG)
CONTENTS
Drawing administration message
0. INTRODUCTION
1. SCOPE
1.1 Functional definition
1.2 Field of application
1.3 Principles
2. REFERENCES
3. TERMS AND DEFINITIONS
3.1 Standard terms and definitions
4. MESSAGE DEFINITION
4.1 Segment clarification
4.2 Segment index (alphabetical sequence by tag)
4.3 Message structure
4.3.1 Segment table
----------------------------------------------------------------------
For general information on UN standard message types see UN Trade Data
Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM
General Introduction
----------------------------------------------------------------------
0. INTRODUCTION
This specification provides the definition of the Drawing
administration message (CONDRA) to be used in Electronic Data
Interchange (EDI) between trading partners involved in
administration, commerce and transport.
1. SCOPE
1.1 Functional definition
The message will be used for the administration of each
exchange of a set of engineering/CAD files. It will give
additional information about the files; for example, their
nature, a list of their contents and technical information
necessary to interpret them.
The whole process of exchanging engineering or CAD (Computer
Aided Design) files between different parties within projects
will be supported by EDIFACT messages. The message CONDRA is
one of these messages.
1.2 Field of application
The Drawing administration message may be used for both
national and international applications. It is based on
universal practice related to administration, commerce and
transport, and is not dependent on the type of business or
industry.
The following descriptions refer to the exchange of
engineering/CAD files, but do not exclude any other type of
"native" files, e.g. files originating from software packages
and tools like word-processing, spreadsheet, DTP (Desk Top
Publishing), graphics and so on.
1.3 Principles
CONDRA is the EDIFACT message to administer the exchange of
engineering/CAD files. The message itself does not consist of
any engineering or graphical information. This information will
be transferred within files written in existing standard
graphical exchange formats or native formats, referred to
within the message as external file reference to identify each
of these files. The nature of the engineering files and its
content is not relevant for the syntax of the EDIFACT message.
All types of engineering/CAD files may be exchanged during a
project's life cycle. The naming/structuring conventions,
including project organisation and system environments can be
defined in the EDIFACT message CONDRO (Drawing Organisation).
CONDRA will refer to the message CONDRO, previously received by
the business parties, if there is additional information
required about the project organisation, system environment and
naming/structuring convention.
2. REFERENCES
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General
Introduction, Section 1.
3. TERMS AND DEFINITIONS
3.1 Standard terms and definitions
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General
Introduction, Section 2.
4. MESSAGE DEFINITION
4.1 Segment clarification
This section should be read in conjunction with the segment
table which indicates mandatory, conditional and repeating
requirements.
0010 UNH, Message header
A service segment starting and uniquely identifying a message.
The message type code for the Drawing administration message is
CONDRA.
Note: Drawing administration messages conforming to this
document must contain the following data in segment UNH,
composite S009:
Data element 0065 CONDRA
0052 D
0054 01C
0051 UN
0020 BGM, Beginning of message
A segment for unique identification of the Drawing
administration document name, number and function.
0030 DTM, Date/time/period
A segment specifying the dates relevant to this document; e.g.
the date, when the drawing administration in this message has
been defined.
0040 AUT, Authentication result
A segment used to authenticate the message by exchanging a
password or some other form of identification agreed between
the business partners.
0050 AGR, Agreement identification
A segment will be used to identify the type of agreement that
apply to the information given by this message.
0060 FTX, Free text
A segment with free text information, in coded or clear form,
used for any textual information. In computer to computer
exchanges, such text will require the receiver to process this
segment manually.
0070 QTY, Quantity
This segment conveys exchange information like the number of
engineering/CAD files and their total size (volume) that form
part of the exchange of this message and to which this message
refers.
0080 Segment group 1: RFF-DOC-DTM-FTX
A group of segments used for quoting references and their
relevant dates applicable to the message. For the building
industry the following recommendation is given: in the first
occurrence of this segment group the project references, if
relevant, can be given, in order to identify the project to
which this message relates. In any subsequent recurrence of
this segment group, references to other messages (e.g. the
original CONDRO when it is an update) or documents, relevant to
this message, may be quoted.
0090 RFF, Reference
A segment for quoting the unique references which can be the
project number to which this message is relevant, or, in the
case of a reference to another message or document, that
message or document's unique identifier.
0100 DOC, Document/message details
Document details of the reference quoted in the previous RFF
segment.
0110 DTM, Date/time/period
Date of a reference quoted in the previous RFF segment, e.g.
project date or message/document date.
0120 FTX, Free text
This segment can contain any textual information relevant to
the reference quoted in the previous RFF segment, e.g. a
small project or message/document description and/or other
narrative, for additional information.
0130 Segment group 2: NAD-LOC-FTX-INP-RCS-SG3-SG4
A group of segments identifying all the relevant parties with
specific information about them that other business partner
should know.
0140 NAD, Name and address
A segment identifying name and address of a party, in coded
or clear form, and its function relevant to the Message. It
is recommended that where possible only the coded form of
the party ID should be specified.
0150 LOC, Place/location identification
A segment giving more specific location information of the
party specified in the NAD segment e.g. internal
site/building number.
0160 FTX, Free text
This segment allows any narrative that may be needed to
accompany the party name and address information specified
in the previous NAD segment.
0170 INP, Parties and instruction
A segment that gives each of the receivers their specific
instructions for what they should do with this message and
the files to which this message refers.
0180 RCS, Requirements and conditions
A segment that gives specific requirements to each of the
receivers of this message, e.g. action request.
0190 Segment group 3: RFF-DTM
This segment group can be used to quote specific references
for each partner, that may be needed for internal use.
Examples of references that a partner may require are
internal project number.
0200 RFF, Reference
In this segment specific internal references will be
quoted, as and when required.
0210 DTM, Date/time/period
A segment specifying the date and/or time details related
to the party's specific internal references.
0220 Segment group 4: CTA-COM-LOC
A group of segments giving contact details of the specific
person or department within the party identified in the NAD
segment.
0230 CTA, Contact information
A segment to identify a person or department, and their
function, to whom communications should be directed.
0240 COM, Communication contact
A segment to identify a communication type and number for
the contact specified in the CTA segment.
0250 LOC, Place/location identification
This segment specifies the location of the contact
specified in the previous CTA segment. In large
organisations and construction projects it is possible
that persons are not necessarily on the same internal
site or construction site specified in the previous LOC
segment in segment group 2. This segment also enables the
specification of a more accurate internal site location.
0260 Segment group 5: EFI-CED-RFF-DTM-QTY-SG6
A group of segments that refers through an external file
identification to each of the external engineering/CAD files
and giving additional information about each of the files.
0270 EFI, External file link identification
This segment will identify the external files by indicating
the file name, file number and its sequence number in an
exchange.
0280 CED, Computer environment details
A segment that gives details of a computer or software
environment.
0290 RFF, Reference
A segment giving reference related to the file, identified
by the previous EFI segment. This reference number is
specific to the sender, and the receivers may be informed
about its full meaning through another message (e.g. for the
building industry message CONDRO) if this feature is used.
0300 DTM, Date/time/period
This segment will convey the date/time details of the
external engineering/CAD file.
0310 QTY, Quantity
The size/volume of the external engineering/CAD file
identified in the previous EFI segment.
0320 Segment group 6: BII-GIS-DTM-IMD-QTY-CTA-AUT-AGR-INP-RCS-
LOC-DIM-MEA-SG7
A group of segments that records more detailed information
about the contents of the external engineering/CAD file is
identified in the previous EFI segment. This information is
organised hierarchically. First, each hierarchy is
identified, followed by the type of hierarchy.
0330 BII, Structure identification
This segment will, through a structured index code,
uniquely identify the level described in the following
segments.
0340 X GIS, General indicator
This segment is used to define the level type identified
by the previous BII segment, like, for example, drawing
sheet, view, layer group, and layer, but also phase etc.
0350 DTM, Date/time/period
Date and time details of the level identified in the
previous BII segment.
0360 IMD, Item description
This segment contains the name of the level that is
identified in the previous BII segment.
0370 QTY, Quantity
This segment conveys quantity details of the level
identified in the previous BII segment. This quantity
details concern the precision or the number of objects in
the lower level, e.g. number of drawing views.
0380 CTA, Contact information
The person or department responsible (author) of this
specific part (level) of the contents is recorded in this
segment.
0390 AUT, Authentication result
A segment used to authenticate the part of the message
identified in the previous BII segment by exchanging a
password or some other form of identification agreed
between the business partners.
0400 AGR, Agreement identification
This segment will be used to identify the "type of
agreement" that applies to the information defined in the
previous BII segment.
0410 INP, Parties and instruction
Instructions for the receiver for this specific part
(level) of the contents are recorded in this segment.
0420 RCS, Requirements and conditions
Requirements for the receiver for this specific part
(level) of the contents are recorded in this segment.
0430 LOC, Place/location identification
This location of the level (e.g. layer) in a co-ordinate
system is given in this segment.
0440 DIM, Dimensions
Dimensions (like size, unit of measurements) are given in
this segment.
0450 MEA, Measurements
The scale used can be quoted in this segment.
0460 Segment group 7: RFF-SG8-SG9
For each of the levels that are identified in the
previous BII segment it is possible to refer to other
messages/documents on other levels of the structure of
the engineering/CAD file identified in the previous EFI
segment. It is also possible to refer to other levels
which are part of a different engineering/CAD file than
the one identified in the previous EFI segment. If
needed, here should also be made a reference to a
contractual document or to a revision number.
0470 RFF, Reference
An ID number will be used to refer to either another
message/document or to another engineering/CAD file.
If needed, here should also be made a reference to a
contractual document or to a revision number.
0480 Segment group 8: DOC-DTM
If the reference number quoted in the previous RFF
segment is a reference to another message/document,
this segment group is used to give more details about
this message/document.
0490 DOC, Document/message details
The details of the message/document referred to are
quoted in this segment.
0500 DTM, Date/time/period
Date/time details of the message/document referred
to are quoted in this segment.
0510 Segment group 9: SEQ-BII-RFF-GIS-DTM-IMD
This segment group will be used when a reference is
made to another specific level in the structure of an
engineering/CAD file.
If in the previous RFF segment a standard dummy value
is quoted, the level referred to is part of the
engineering/CAD file identified in the previous EFI
segment. If, however, in the previous RFF segment any
other value is quoted, the level described in the
following BII segment is part of the engineering/CAD
file identified by the ID number.
0520 SEQ, Sequence details
A segment identifying the beginning of a CAD-file
by a sequential number.
0530 BII, Structure identification
This segment will through a structured index code
uniquely identify the level referred to.
0540 RFF, Reference
Through an "index system", updates (versions) can
be recorded in a reference number. In this segment
the version of the level referred to can be quoted.
0550 X GIS, General indicator
This segment is used to define the level type
identified in the previous BII segment; like, for
example, drawing sheet, view, layer group and
layer.
0560 DTM, Date/time/period
Date/time details of the level that is referred to
are quoted here.
0570 IMD, Item description
A detailed description of the level referred to can
be quoted in this segment.
0580 UNT, Message trailer
A service segment ending a message, giving the total number of
segments in the message (including the UNH & UNT) and the
control reference number of the message.
4.2 Segment index (alphabetical sequence by tag)
AGR Agreement identification
AUT Authentication result
BGM Beginning of message
BII Structure identification
CED Computer environment details
COM Communication contact
CTA Contact information
DIM Dimensions
DOC Document/message details
DTM Date/time/period
EFI External file link identification
FTX Free text
X GIS General indicator
IMD Item description
INP Parties and instruction
LOC Place/location identification
MEA Measurements
NAD Name and address
QTY Quantity
RCS Requirements and conditions
RFF Reference
SEQ Sequence details
UNH Message header
UNT Message trailer
4.3 Message structure
4.3.1 Segment table
Pos Tag Name S R
0010 UNH Message header M 1
0020 BGM Beginning of message M 1
0030 DTM Date/time/period M 5
0040 AUT Authentication result C 2
0050 AGR Agreement identification C 2
0060 FTX Free text C 10
0070 QTY Quantity C 5
0080 ----- Segment group 1 ------------------ M 10----------+
0090 RFF Reference M 1 |
0100 DOC Document/message details C 1 |
0110 DTM Date/time/period C 1 |
0120 FTX Free text C 5-----------+
0130 ----- Segment group 2 ------------------ M 999---------+
0140 NAD Name and address M 1 |
0150 LOC Place/location identification C 99 |
0160 FTX Free text C 10 |
0170 INP Parties and instruction C 10 |
0180 RCS Requirements and conditions C 10 |
|
0190 ----- Segment group 3 ------------------ C 5----------+|
0200 RFF Reference M 1 ||
0210 DTM Date/time/period C 1----------+|
|
0220 ----- Segment group 4 ------------------ C 10---------+|
0230 CTA Contact information M 1 ||
0240 COM Communication contact C 5 ||
0250 LOC Place/location identification C 1----------++
0260 ----- Segment group 5 ------------------ C 99----------+
0270 EFI External file link identification M 1 |
0280 CED Computer environment details M 10 |
0290 RFF Reference C 10 |
0300 DTM Date/time/period C 5 |
0310 QTY Quantity C 5 |
|
0320 ----- Segment group 6 ------------------ C 100000-----+|
0330 BII Structure identification M 1 ||
0340 X GIS General indicator C 5 ||
0350 DTM Date/time/period C 10 ||
0360 IMD Item description C 1 ||
0370 QTY Quantity C 10 ||
0380 CTA Contact information C 1 ||
0390 AUT Authentication result C 2 ||
0400 AGR Agreement identification C 2 ||
0410 INP Parties and instruction C 10 ||
0420 RCS Requirements and conditions C 10 ||
0430 LOC Place/location identification C 5 ||
0440 DIM Dimensions C 5 ||
0450 MEA Measurements C 1 ||
||
0460 ----- Segment group 7 ------------------ C 99--------+||
0470 RFF Reference M 1 |||
|||
0480 ----- Segment group 8 ------------------ C 1--------+|||
0490 DOC Document/message details M 1 ||||
0500 DTM Date/time/period C 1--------+|||
|||
0510 ----- Segment group 9 ------------------ C 999------+|||
0520 SEQ Sequence details M 1 ||||
0530 BII Structure identification M 1 ||||
0540 RFF Reference C 1 ||||
0550 X GIS General indicator M 5 ||||
0560 DTM Date/time/period C 1 ||||
0570 IMD Item description C 1--------++++
0580 UNT Message trailer M 1
Copyright United Nations, all rights reserved
UN Economic Commission for Europe
Palais des Nations, CH-1211 Geneva 10, Switzerland
Tel: +41-22 917 2016 Fax: +41-22 917 0037 E-mail: TradeMaster@unece.org
UN/EDIFACT Directories