United Nations Directories for Electronic Data Interchange for
Administration, Commerce and Transport
UN/EDIFACT
United Nations Directories for Electronic Data Interchange for |
Message Type : CONPVA
Version : D
Release : 01C
Contr. Agency: UN
Revision : 3
Date : 2001-11-07
SOURCE: D7 Architecture, Engineering and Construction (SWG)
CONTENTS
Payment valuation message
0. INTRODUCTION
1. SCOPE
1.1 Functional definition
1.2 Field of application
1.3 Principles
2. REFERENCES
3. TERMS AND DEFINITIONS
3.1 Standard terms and definitions
4. MESSAGE DEFINITION
4.1 Segment clarification
4.1.1 Header section
4.1.2 Detail section
4.1.3 Summary section
4.2 Segment index (alphabetical sequence by tag)
4.3 Message structure
4.3.1 Segment table
----------------------------------------------------------------------
For general information on UN standard message types see UN Trade Data
Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM
General Introduction
----------------------------------------------------------------------
0. INTRODUCTION
This specification provides the definition of the Payment
valuation message (CONPVA) to be used in Electronic Data
Interchange (EDI) between trading partners involved in
administration, commerce and transport.
1. SCOPE
1.1 Functional definition
Typically this message will be used between a contractor and
the client's representative, during the process of approving
the value and payment for work completed for a given period of
time.
1.2 Field of application
The Payment valuation message may be used for both national and
international applications. It is based on universal practice
related to administration, commerce and transport, and is not
dependent on the type of business or industry.
The following descriptions refer to the construction industry
as an example, but do not exclude other business sectors'
implementation.
1.3 Principles
This message is to be used to support the business process of
communicating the value of progress against groups of work
items which make up a construction project.
There are several examples within the construction process
where one party is required to advise another party about the
value of work performed during a specific time period or since
the start of the project.
A project may be subdivided into individual groupings of work,
referred to as items and it is against these items that
progress quantities are reported.
Similar exchanges take place on the entire or part of the
project and between other parties also involved in the
construction of the project.
Within the Construction industry there are numerous rules which
govern this part of the process. Although, efforts have been
made to keep the design of the message generic, other potential
users of this message are cautioned about the specific and
original role for which this message has been designed.
This is only one of a number of messages being designed for the
construction industry. This particular message refers to
already established items of work, these items will have been
defined at the start of the project. Work is well advanced for
suitable EDI messages to address this part of the process.
Allowance has been made within CONPVA message for "new" items
of work. There are a number of reasons why additional items of
work will occur once a project has started.
Each work item may contain more than one quantity and this has
been accommodated. An example of this would be the inclusion of
both a cumulative and a "this period" quantity.
In addition to conveying specific payment values this message
is designed to record details of revisions and fluctuation to
standard tables of rates and payment factors which are used in
the calculation of the payment value.
Confirmation of values processed for direct payment by the
client are also catered for. These relate to individual entries
within a CONDPV message.
2. REFERENCES
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General
Introduction, Section 1.
3. TERMS AND DEFINITIONS
3.1 Standard terms and definitions
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General
Introduction, Section 2.
4. MESSAGE DEFINITION
4.1 Segment clarification
This section should be read in conjunction with the segment
table which indicates mandatory, conditional and repeating
requirements.
4.1.1 Header section
Information to be provided in the Header section:
0010 UNH, Message header
A service segment starting and uniquely identifying a message.
The message type code for the Payment valuation message is
CONPVA.
Note: Payment valuation messages conforming to this document
must contain the following data in segment UNH, composite S009:
Data element 0065 CONPVA
0052 D
0054 01C
0051 UN
0020 BGM, Beginning of message
A segment for unique identification of the Payment valuation
document name, number and function.
0030 DTM, Date/time/period
A segment specifying the dates that apply, e.g. date of
valuation, date of submission, acceptance date, etc.
0040 AUT, Authentication result
A segment used to authenticate the message by exchanging a
password or some other form of identification agreed between
the trading partners.
0050 FTX, Free text
A segment with free text information, in coded or clear form,
used for any textual qualification. In computer to computer
exchanges, such text will require the receiver to process this
segment manually.
0060 Segment group 1: RFF-DTM
A group of segments for quoting references and their relevant
dates that are applicable to the message.
0070 RFF, Reference
A segment for quoting references that are applicable to this
whole message. e.g. contract identity, operational
references, former valuation reference number.
0080 DTM, Date/time/period
Dates of references quoted in the previous RFF segment.
0090 Segment group 2: NAD-LOC-FII-SG3-SG4-SG5
A group of segments identifying the parties with associated
information.
0100 NAD, Name and address
A segment identifying names and addresses of the parties, in
coded or clear form, and their functions relevant to the
valuation.
Identification of the contractor and client parties is
mandatory for the valuation message. It is recommended that
where possible only the coded form of the party ID should be
specified.
0110 LOC, Place/location identification
A segment giving more specific location information of the
party specified in the NAD segment e.g. internal
site/building number.
0120 FII, Financial institution information
A segment identifying the financial institution (e.g. bank)
and relevant account numbers for the contractor, client and
where necessary other parties.
0130 Segment group 3: RFF-DTM
A group of segments for giving references only relevant to
the specified party rather than the whole valuation.
0140 RFF, Reference
A segment identifying the reference by its number and
where appropriate a line number within a document.
0150 DTM, Date/time/period
A segment specifying the date and/or time related to the
reference.
0160 Segment group 4: DOC-DTM
A group of segments identifying the documentary requirements
of the specified party.
0170 DOC, Document/message details
A segment identifying and providing information relating
to the documents required by the party specified by the
NAD.
0180 DTM, Date/time/period
A segment specifying the date and/or time of the
document.
0190 Segment group 5: CTA-COM
A group of segments giving contact details of the specific
person or department within the party identified in the NAD
segment.
0200 CTA, Contact information
A segment to identify a person or department, and their
function, to whom communications should be directed.
0210 COM, Communication contact
A segment to identify a communications type and number
for the contact specified in the CTA segment.
0220 Segment group 6: CUX-DTM
A group of segments specifying the currencies and related
dates/periods valid for the whole valuation. Currency data may
be omitted in national applications but will be required for
international transactions.
0230 CUX, Currencies
A segment identifying the currencies required in the
valuation e.g. the valuation currency. A rate of exchange
may be given to convert a reference currency into a target
currency.
0240 DTM, Date/time/period
A segment specifying the date/time/period related to the
rate of exchange.
0250 Segment group 7: IND-RFF-DTM
A group of segments to convey the new fluctuation indices
values.
0260 IND, Index details
A segment to provide a new value of the quoted index.
0270 RFF, Reference
A segment to indicate the reference of the index.
0280 DTM, Date/time/period
A segment to convey the new date of value of the quoted
index.
0290 Segment group 8: BII-RCS-PAI-PAT-PCD-SG9-SG10-SG19
A group of segments to indicate: - the financial total amounts
of the valuation or parts of it - conditions of payments -
conditions of allowances and charges, bonuses and penalties -
the total amounts to be paid directly to subcontractors
(request or confirmation).
0300 BII, Structure identification
A segment to identify the group of items to which the
valuation amounts stated in the group of segments apply. The
identification of the groups of items referred to here has
already been conveyed through another appropriate EDI
message.
0310 RCS, Requirements and conditions
A segment to provide requirements that are applicable to the
whole group of items referred to in BII.
0320 PAI, Payment instructions
A segment indicating conditions of payment, guarantee and
method of payment for the whole group of items referred to
in BII.
0330 X PAT, Payment terms basis
A segment indicating the payment terms, date/time basis, and
additional terms valid for the whole group of items referred
to in BII.
0340 PCD, Percentage details
A segment used to provide percentages at contract or sub-
contract level.
0350 Segment group 9: APR-DTM
A group of segments to convey the results of the computation
of the fluctuation formulas and the relevant dates/periods.
This group is used to provide only price variation resulting
from the computation of the fluctuation price formula,
excluding any amount.
0360 APR, Additional price information
A segment to indicate the price fluctuation computation.
0370 DTM, Date/time/period
A segment to indicate the date or period of application
of the factor quoted in APR.
0380 Segment group 10: ARD-MOA-FTX-SG11-SG12-SG13
A group of segments to convey the financial amounts related
to the group of items referred to in BII and their relevant
taxes and if necessary the details of their computation.
0390 ARD, Monetary amount function
A segment to convey a financial status of the following
information.
0400 MOA, Monetary amount
A segment to convey monetary amounts related to the group
of items referred to in BII and to the financial nature
quoted in ARD.
0410 FTX, Free text
A segment with free text information, in coded or clear
form, used for any textual qualification. In computer to
computer exchanges, such text will require the receiver
to process this segment manually.
0420 Segment group 11: TAX-MOA-LOC
A group of segments specifying tax related information,
and when necessary, the location(s) to which that tax
information relates.
0430 TAX, Duty/tax/fee details
A segment specifying a tax type, category and rate, or
exemption, relating to the group of items referred to
in BII. e.g. Value Added Tax at the standard rate is
applicable for all items.
0440 MOA, Monetary amount
A segment specifying the amount for the identified
tax/fee.
0450 LOC, Place/location identification
A segment indicating the location to which the tax or
exemption specified in the TAX segment applies, e.g.
city or state or country tax.
0460 Segment group 12: APR-RFF-DTM-MOA-TAX
A group of segments used to provide amounts breakdown
related to price variation rate. It provides all
information needed to compute these amounts.
0470 APR, Additional price information
A segment used to provide the price variation rate
which is used as a basis for calculation of the
following amounts.
0480 RFF, Reference
A segment used to provide references used as a basis
for calculation of the following amounts.
0490 DTM, Date/time/period
A segment to provide dates used for the calculation of
the price variation rate.
0500 MOA, Monetary amount
A segment used to provide the amount to be paid and
all amounts used in the calculation of this amount.
0510 TAX, Duty/tax/fee details
A segment used to provide tax related information.
0520 Segment group 13: ALC-ALI-RFF-DTM-FTX-SG14-SG15-SG16-
SG17-SG18
A group of segments specifying allowances and charges for
the group of items referred to in BII. The allowance or
charge specified within this Segment group may either
relate to the group of items referred to in BII in which
case it cannot be overridden at item level, or it can
relate to the line items as a default allowance/charge
and can be overridden by the ALC Segment group within the
item section. Where relevant, additional information, tax
and alternate currency details are to be indicated in the
TAX and MOA segments. The basis for the calculation of
the allowance/charge may be a quantity, a percentage, an
amount or a rate and one of the Segment group 14-17
should be used accordingly.
0530 ALC, Allowance or charge
A segment identifying the charge or allowance and,
where necessary its calculation sequence.
0540 ALI, Additional information
A segment indicating that allowance or charge
specified is subject to special conditions owing to
origin, customs preference or commercial factors.
0550 RFF, Reference
To reference rules applied when setting the bonus or
penalty. This may apply to price variation calculation
formula itself described in price fluctuations above.
0560 DTM, Date/time/period
To provide dates used in setting bonus and penalty.
0570 FTX, Free text
To provide free text information used in setting bonus
and penalty. It may be used to provide the nature of
the bonus or penalty or to provide complex calculation
rules.
0580 Segment group 14: QTY-RNG
A group of segments specifying the quantity of the
allowance or charge with its measure unit specifier. A
range to which the allowance or charge applies may be
specified. e.g. An allowance of a free quantity of 20
pieces may be specified if the quantity ordered is
greater than 1000 pieces.
0590 QTY, Quantity
A segment identifying the type of quantity and the
quantity related to the allowance or charge.
0600 RNG, Range details
A segment specifying, if required, the range to
which the allowance or charge applies.
0610 Segment group 15: PCD-RNG
A group of segments specifying the percentage for the
allowance or charge, e.g. The allowance/charge amount
is calculated as 5% of the goods value or a price
reduction of 5% may be specified if the goods quantity
ordered is within the range 5 tons to 10 tons.
0620 PCD, Percentage details
A segment identifying the percentage and the
percentage basis for the calculation of the
allowance or charge.
0630 RNG, Range details
A segment specifying, if required, a range for the
application of the percentage.
0640 Segment group 16: MOA-RNG
A group of segments specifying a monetary amount for
an allowance or charge. A range to which the allowance
or charge applies can be specified.
0650 MOA, Monetary amount
A segment identifying the monetary amount for the
allowance or charge.
0660 RNG, Range details
A segment specifying, if required, a range for the
application of the allowance/charge amount.
0670 Segment group 17: RTE-RNG
A group of segments specifying the rate per unit and
basis to which the allowance or charge applies, e.g.
The allowance/charge amount is 3 DEM per 10 tons.
0680 RTE, Rate details
A segment specifying the rate per unit and the
basis for calculation.
0690 RNG, Range details
A segment specifying, if required, the range for
the application of the allowance/charge rate.
0700 Segment group 18: TAX-MOA
A group of segments specifying tax related information
for the allowance or charge and, when necessary, the
location(s) to which that tax information relates.
0710 TAX, Duty/tax/fee details
A segment specifying the tax type, category, and
rate, or exemption, related to the allowance or
charge.
0720 MOA, Monetary amount
A segment specifying the amount for the allowance
or charge.
0730 Segment group 19: NAD-LOC-FII-MOA-SG20-SG21-SG22
A group of segments identifying the parties with associated
information for the group of items referred to in BII.
0740 NAD, Name and address
A segment identifying names and addresses of the parties,
in coded or clear form, and their functions relevant to
the valuation. Identification of the contractor and
client parties is mandatory for the valuation message. It
is recommended that where possible only the coded form of
the party ID should be specified. e.g. The contractor and
client are known to each other, thus only the coded ID is
required, but the subcontractors addresses may vary and
would have to be clearly specified, preferably in
structured format.
0750 LOC, Place/location identification
A segment giving more specific location information of
the party specified in the NAD segment e.g. internal
site/building number.
0760 FII, Financial institution information
A segment identifying the financial institution (e.g.
bank) and relevant account numbers for the contractor,
client and where necessary other parties.
0770 MOA, Monetary amount
To provide amounts to be paid to each beneficiary,
especially sub-contractors.
0780 Segment group 20: RFF-DTM
A group of segments for giving references only relevant
to the specified party rather than the whole valuation.
0790 RFF, Reference
A segment identifying the reference by its number and
where appropriate a line number within a document.
0800 DTM, Date/time/period
A segment specifying the date and/or time related to
the reference.
0810 Segment group 21: DOC-DTM
A group of segments identifying the documentary
requirements of the specified party.
0820 DOC, Document/message details
A segment identifying and providing information
relating to the documents required by the party
specified by the NAD.
0830 DTM, Date/time/period
A segment specifying the date and/or time of the
document.
0840 Segment group 22: CTA-COM
A group of segments giving contact details of the
specific person or department within the party identified
in the NAD segment.
0850 CTA, Contact information
A segment to identify a person or department, and
their function, to whom communications should be
directed.
0860 COM, Communication contact
A segment to identify a communications type and number
for the contact specified in the CTA segment.
4.1.2 Detail section
Information to be provided in the Detail section:
0870 UNS, Section control
A service segment placed at the beginning of the detail section
to avoid collision.
0880 Segment group 23: BII-RCS-QTY-PRI-MOA-SG24-SG26-SG27-SG28
A group of segments providing the quantities and the
corresponding prices of the works performed for each item, or
group of items.
0890 BII, Structure identification
A segment to identify the item of work (or group of items)
to which the quantities apply.
0900 RCS, Requirements and conditions
A segment to provide requirements that are applicable to the
whole group of segments: financial status (when an item is
added to the BOQ, dayworks for example), and an action
request.
0910 QTY, Quantity
A segment giving the quantity of works performed, in
cumulative, last period cumulative, quantity of the period,
and other forms as required.
0920 PRI, Price details
A segment used to indicate the unit price of the items.
0930 MOA, Monetary amount
A segment used to indicate monetary amount which are the
computation of the unit price and quantities quoted in QTY.
0940 Segment group 24: LIN-SG25
A group of segments to record descriptive text for items
that are added into existing groups during the completion of
the works, e.g. dayworks.
0950 LIN, Line item
A segment to record a qualifier specifying that we are at
item level.
0960 Segment group 25: IMD-RFF-GIS
A group of segments to record the description line
details together with text reference numbers and change
action codes used to identify who is authorised to apply
changes.
0970 IMD, Item description
This segment is used to convey any descriptive
material to be recorded for the item. This descriptive
material can apply to the item description and item
heading information.
0980 RFF, Reference
A segment used to record up to two text reference
numbers per item description line.
0990 X GIS, General indicator
A segment used to record up to two text change action
codes per item description line. In this context
suppression is not allowed.
1000 Segment group 26: APR-DTM
A group of segments to convey the results of the computation
of the fluctuation formulas and the relevant dates/periods
for this item when it is different from the group to which
this item belongs.
1010 APR, Additional price information
A segment to indicate the date or period of application
of the factor quoted in APR.
1020 DTM, Date/time/period
A segment to indicate the date or period of application
of the factor quoted in APR.
1030 Segment group 27: TAX-MOA-LOC
A group of segments specifying tax related information for
this item when it is specific to this item or different from
the group to which it belongs, and when necessary, the
location(s) to which that tax information relates.
1040 TAX, Duty/tax/fee details
A segment specifying a tax type, category and rate, or
exemption, relating to the group of items referred to in
BII. e.g. Value Added Tax at the standard rate is
applicable for all items.
1050 MOA, Monetary amount
A segment specifying the amount for the identified
tax/fee.
1060 LOC, Place/location identification
A segment indicating the location to which the tax or
exemption specified in the TAX segment applies, e.g. city
or state or country tax.
1070 Segment group 28: ALC-ALI-SG29-SG30-SG31-SG32-SG33
A group of segments specifying allowances and charges for
the item referred to in BII where this is different to or
not specified within the group of items to which it belongs.
1080 ALC, Allowance or charge
A segment identifying the charge or allowance and, where
necessary its calculation sequence.
1090 ALI, Additional information
A segment indicating that allowance or charge specified
is subject to special conditions owing to origin, customs
preference or commercial factors.
1100 Segment group 29: QTY-RNG
A group of segments specifying the quantity of the
allowance or charge with its measure unit specifier. A
range to which the allowance or charge applies may be
specified. e.g. An allowance of a free quantity of 20
pieces may be specified if the quantity ordered is
greater than 1000 pieces.
1110 QTY, Quantity
A segment identifying the type of quantity and the
quantity related to the allowance or charge.
1120 RNG, Range details
A segment specifying, if required, the range to which
the allowance or charge applies.
1130 Segment group 30: PCD-RNG
A group of segments specifying the percentage for the
allowance or charge, e.g. The allowance/charge amount is
calculated as 5% of the goods value or a price reduction
of 5% may be specified if the goods quantity ordered is
within the range 5 tons to 10 tons.
1140 PCD, Percentage details
A segment identifying the percentage and the
percentage basis for the calculation of the allowance
or charge.
1150 RNG, Range details
A segment specifying, if required, a range for the
application of the percentage.
1160 Segment group 31: MOA-RNG
A group of segments specifying a monetary amount for an
allowance or charge. A range to which the allowance or
charge applies can be specified.
1170 MOA, Monetary amount
A segment identifying the monetary amount for the
allowance or charge.
1180 RNG, Range details
A segment specifying, if required, a range for the
application of the allowance/charge amount.
1190 Segment group 32: RTE-RNG
A group of segments specifying the rate per unit and
basis to which the allowance or charge applies, e.g. The
allowance/charge amount is 3 DEM per 10 tons.
1200 RTE, Rate details
A segment specifying the rate per unit and the basis
for calculation.
1210 RNG, Range details
A segment specifying, if required, the range for the
application of the allowance/charge rate.
1220 Segment group 33: TAX-MOA
A group of segments specifying tax related information
for the allowance or charge and, when necessary, the
location(s) to which that tax information relates.
1230 TAX, Duty/tax/fee details
A segment specifying the tax type, category, and rate,
or exemption, related to the allowance or charge.
1240 MOA, Monetary amount
A segment specifying the amount for the allowance or
charge.
4.1.3 Summary section
Information to be provided in the Summary section:
1250 UNS, Section control
A service segment placed at the beginning of the summary
section to avoid collision.
1260 Segment group 34: TAX-MOA
A group of segments specifying taxes totals for the valuation.
1270 TAX, Duty/tax/fee details
A segment specifying the tax type to be summarized.
1280 MOA, Monetary amount
A segment specifying the amount for the tax specified.
1290 CNT, Control total
A segment by which control totals may be provided by the sender
for checking by the receiver.
1300 UNT, Message trailer
A service segment ending a message, giving the total number of
segments in the message (including the UNH & UNT) and the
control reference number of the message.
4.2 Segment index (alphabetical sequence by tag)
ALC Allowance or charge
ALI Additional information
APR Additional price information
ARD Monetary amount function
AUT Authentication result
BGM Beginning of message
BII Structure identification
CNT Control total
COM Communication contact
CTA Contact information
CUX Currencies
DOC Document/message details
DTM Date/time/period
FII Financial institution information
FTX Free text
X GIS General indicator
IMD Item description
IND Index details
LIN Line item
LOC Place/location identification
MOA Monetary amount
NAD Name and address
PAI Payment instructions
X PAT Payment terms basis
PCD Percentage details
PRI Price details
QTY Quantity
RCS Requirements and conditions
RFF Reference
RNG Range details
RTE Rate details
TAX Duty/tax/fee details
UNH Message header
UNS Section control
UNT Message trailer
4.3 Message structure
4.3.1 Segment table
Pos Tag Name S R
HEADER SECTION
0010 UNH Message header M 1
0020 BGM Beginning of message M 1
0030 DTM Date/time/period M 9
0040 AUT Authentication result C 2
0050 FTX Free text C 5
0060 ----- Segment group 1 ------------------ C 99----------+
0070 RFF Reference M 1 |
0080 DTM Date/time/period C 5-----------+
0090 ----- Segment group 2 ------------------ M 9-----------+
0100 NAD Name and address M 1 |
0110 LOC Place/location identification C 25 |
0120 FII Financial institution information C 5 |
|
0130 ----- Segment group 3 ------------------ C 10---------+|
0140 RFF Reference M 1 ||
0150 DTM Date/time/period C 5----------+|
|
0160 ----- Segment group 4 ------------------ C 5----------+|
0170 DOC Document/message details M 1 ||
0180 DTM Date/time/period C 5----------+|
|
0190 ----- Segment group 5 ------------------ C 5----------+|
0200 CTA Contact information M 1 ||
0210 COM Communication contact C 5----------++
0220 ----- Segment group 6 ------------------ C 5-----------+
0230 CUX Currencies M 1 |
0240 DTM Date/time/period C 5-----------+
0250 ----- Segment group 7 ------------------ C 100---------+
0260 IND Index details M 1 |
0270 RFF Reference M 1 |
0280 DTM Date/time/period C 1-----------+
0290 ----- Segment group 8 ------------------ C 1000--------+
0300 BII Structure identification M 1 |
0310 RCS Requirements and conditions C 1 |
0320 PAI Payment instructions C 1 |
0330 X PAT Payment terms basis C 1 |
0340 PCD Percentage details C 9 |
|
0350 ----- Segment group 9 ------------------ C 2----------+|
0360 APR Additional price information M 1 ||
0370 DTM Date/time/period C 5----------+|
|
0380 ----- Segment group 10 ------------------ M 100--------+|
0390 ARD Monetary amount function M 1 ||
0400 MOA Monetary amount M 6 ||
0410 FTX Free text C 10 ||
||
0420 ----- Segment group 11 ------------------ C 5---------+||
0430 TAX Duty/tax/fee details M 1 |||
0440 MOA Monetary amount C 1 |||
0450 LOC Place/location identification C 5---------+||
||
0460 ----- Segment group 12 ------------------ C 99--------+||
0470 APR Additional price information M 1 |||
0480 RFF Reference C 9 |||
0490 DTM Date/time/period C 9 |||
0500 MOA Monetary amount C 9 |||
0510 TAX Duty/tax/fee details C 9---------+||
||
0520 ----- Segment group 13 ------------------ C 99--------+||
0530 ALC Allowance or charge M 1 |||
0540 ALI Additional information C 5 |||
0550 RFF Reference C 9 |||
0560 DTM Date/time/period C 9 |||
0570 FTX Free text C 9 |||
|||
0580 ----- Segment group 14 ------------------ C 1--------+|||
0590 QTY Quantity M 1 ||||
0600 RNG Range details C 1--------+|||
|||
0610 ----- Segment group 15 ------------------ C 1--------+|||
0620 PCD Percentage details M 1 ||||
0630 RNG Range details C 1--------+|||
|||
0640 ----- Segment group 16 ------------------ C 1--------+|||
0650 MOA Monetary amount M 1 ||||
0660 RNG Range details C 1--------+|||
|||
0670 ----- Segment group 17 ------------------ C 1--------+|||
0680 RTE Rate details M 1 ||||
0690 RNG Range details C 1--------+|||
|||
0700 ----- Segment group 18 ------------------ C 1--------+|||
0710 TAX Duty/tax/fee details M 1 ||||
0720 MOA Monetary amount C 1--------+++|
|
0730 ----- Segment group 19 ------------------ C 99---------+|
0740 NAD Name and address M 1 ||
0750 LOC Place/location identification C 25 ||
0760 FII Financial institution information C 5 ||
0770 MOA Monetary amount C 99 ||
||
0780 ----- Segment group 20 ------------------ C 10--------+||
0790 RFF Reference M 1 |||
0800 DTM Date/time/period C 5---------+||
||
0810 ----- Segment group 21 ------------------ C 5---------+||
0820 DOC Document/message details M 1 |||
0830 DTM Date/time/period C 5---------+||
||
0840 ----- Segment group 22 ------------------ C 5---------+||
0850 CTA Contact information M 1 |||
0860 COM Communication contact C 5---------+++
DETAIL SECTION
0870 UNS Section control M 1
0880 ----- Segment group 23 ------------------ C 9999--------+
0890 BII Structure identification M 1 |
0900 RCS Requirements and conditions C 1 |
0910 QTY Quantity M 6 |
0920 PRI Price details C 1 |
0930 MOA Monetary amount M 6 |
|
0940 ----- Segment group 24 ------------------ M 100--------+|
0950 LIN Line item M 1 ||
||
0960 ----- Segment group 25 ------------------ C 1000------+||
0970 IMD Item description M 1 |||
0980 RFF Reference C 5 |||
0990 X GIS General indicator C 5---------++|
|
1000 ----- Segment group 26 ------------------ C 2----------+|
1010 APR Additional price information M 1 ||
1020 DTM Date/time/period C 5----------+|
|
1030 ----- Segment group 27 ------------------ C 5----------+|
1040 TAX Duty/tax/fee details M 1 ||
1050 MOA Monetary amount C 1 ||
1060 LOC Place/location identification C 5----------+|
|
1070 ----- Segment group 28 ------------------ C 20---------+|
1080 ALC Allowance or charge M 1 ||
1090 ALI Additional information C 1 ||
||
1100 ----- Segment group 29 ------------------ C 1---------+||
1110 QTY Quantity M 1 |||
1120 RNG Range details C 1---------+||
||
1130 ----- Segment group 30 ------------------ C 1---------+||
1140 PCD Percentage details M 1 |||
1150 RNG Range details C 1---------+||
||
1160 ----- Segment group 31 ------------------ C 1---------+||
1170 MOA Monetary amount M 1 |||
1180 RNG Range details C 1---------+||
||
1190 ----- Segment group 32 ------------------ C 1---------+||
1200 RTE Rate details M 1 |||
1210 RNG Range details C 1---------+||
||
1220 ----- Segment group 33 ------------------ C 1---------+||
1230 TAX Duty/tax/fee details M 1 |||
1240 MOA Monetary amount C 1---------+++
SUMMARY SECTION
1250 UNS Section control M 1
1260 ----- Segment group 34 ------------------ C 10----------+
1270 TAX Duty/tax/fee details M 1 |
1280 MOA Monetary amount C 2-----------+
1290 CNT Control total C 5
1300 UNT Message trailer M 1
Copyright United Nations, all rights reserved
UN Economic Commission for Europe
Palais des Nations, CH-1211 Geneva 10, Switzerland
Tel: +41-22 917 2016 Fax: +41-22 917 0037 E-mail: TradeMaster@unece.org
UN/EDIFACT Directories