United Nations Directories for Electronic Data Interchange for
Administration, Commerce and Transport
UN/EDIFACT
United Nations Directories for Electronic Data Interchange for |
Message Type : IFTMAN
Version : D
Release : 01C
Contr. Agency: UN
Revision : 9
Date : 2001-11-07
SOURCE: D4 Transport (SWG)
CONTENTS
Arrival notice message
0. INTRODUCTION
1. SCOPE
1.1 Functional definition
1.2 Field of application
1.3 Principles
2. REFERENCES
3. TERMS AND DEFINITIONS
3.1 Standard terms and definitions
3.2 Message terms and definitions
4. MESSAGE DEFINITION
4.1 Segment clarification
4.2 Segment index (alphabetical sequence by tag)
4.3 Message structure
4.3.1 Segment table
----------------------------------------------------------------------
For general information on UN standard message types see UN Trade Data
Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM
General Introduction
----------------------------------------------------------------------
0. INTRODUCTION
This specification provides the definition of the Arrival
notice message (IFTMAN) to be used in Electronic Data
Interchange (EDI) between trading partners involved in
administration, commerce and transport.
1. SCOPE
This paper provides the definition of the Arrival Notice
Message to be used in fulfilling the requirements of trading
partners in the transport chain worldwide, in the interchange
of cargo and transport related information using Electronic
Data Interchange (EDI).
This message is a single consignment based message, being
aligned with other single consignment based messages such as
the booking (IFTMBP, IFTMBF and IFTMBC) and instruction
messages (IFTMIN and IFTMCS). The single consignment based
messages can be used by all modes of transport for the
forwarding and transport of goods from any origin to any
destination, regardless of route or prevailing commercial
practice. These messages are suitable for the arrangement of
the transport of goods between all parties to the movement of
the consignment (including the consignor/shipper and consignee
as well as the forwarders, brokers, and carriers involved) as
well as providing the information necessary to perform that
transport and delivery of the goods. They should be used in the
same way by each mode of transport when the requirements are
common even if functionally similar information is known by
different names.
1.1 Functional definition
A message from the party providing forwarding and/or transport
services to the party such as has been indicated in the
contract, giving notice and details of the arrival of the
consignment.
1.2 Field of application
The Arrival notice message may be used for both national and
international applications. It is based on universal practice
related to administration, commerce and transport, and is not
dependent on the type of business or industry.
1.3 Principles
The notify party might be the consignee or his agent or the
customs broker depending on the custom of the port or the
conditions in the contract.
- A consignment may contain several goods items.
- Goods items may or may not be containerized.
- A goods item may be transported in one or more containers,
and a single container may contain one or more goods items.
- One goods item may be related to one or more customs tariff
codes.
- Goods items related to one customs tariff code may be carried
in one or more containers.
- Goods items may reflect either the contractual or operational
description of the goods.
- Equipment may have other types of equipment attached to it,
e.g. a temperature control unit attached to a container.
- Equipment and/or goods items may be attached to or
transported on another load or transport device, which as such
may be attached to or transported on yet another load or
transport device, e.g. a container on a chassis on a rail-car.
- Transport devices, which have the ability of powered movement
on their own, are specified in the transport details group.
Other load or transport devices are specified as equipment.
- The expression of packaging for goods items can be expressed
at up to three levels.
The transport sub-working group (D4) has developed
recommendations for a harmonised implementation of this message
through its subgroup ITIGG (International Transport
Implementation Guidelines Group).
Users implementing the message are strongly advised to apply
these recommendations, which may be obtained from the D4
secretariat.
2. REFERENCES
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General
Introduction, Section 1.
3. TERMS AND DEFINITIONS
3.1 Standard terms and definitions
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General
Introduction, Section 2.
3.2 Message terms and definitions
A number of generic transport terms are used in this
specification, to be described as:
* MODE OF TRANSPORT: The method of transport used for the
conveyance of goods or persons, e.g. by rail, by road, by sea.
* MEANS OF TRANSPORT: The vehicle used for the transport of
goods or persons, e.g. aircraft, truck, vessel.
* TYPE OF MEANS OF TRANSPORT: The type of vehicle used in the
transport process, e.g. wide body, tank truck, passenger
vessel.
* EQUIPMENT: Material resources necessary to facilitate the
transport and handling of cargo. Transport equipment does under
the given circumstances not have the ability to move by its own
propulsion (e.g. sea container, trailer, unit load device,
pallet).
* TYPE OF EQUIPMENT: The type of material used, e.g. 40 feet
container, four way pallet, mafi trailer.
4. MESSAGE DEFINITION
4.1 Segment clarification
This section should be read in conjunction with the segment
table which indicates mandatory, conditional and repeating
requirements.
0010 UNH, Message header
A service segment starting and uniquely identifying a message.
The message type code for the Arrival notice message is IFTMAN.
Note: Arrival notice messages conforming to this document must
contain the following data in segment UNH, composite S009:
Data element 0065 IFTMAN
0052 D
0054 01C
0051 UN
0020 BGM, Beginning of message
A segment to indicate the beginning of a message and to
transmit identifying number and type of the message.
0030 CTA, Contact information
A segment to identify a person or department to whom
communication should be directed.
0040 COM, Communication contact
A segment to identify a communication number of a person or
department to whom communication should be directed.
0050 DTM, Date/time/period
A segment to indicate a date and time applying to the whole
message, e.g., date and time of document issue.
0060 TSR, Transport service requirements
A segment to identify the contract, conditions of carriage,
services, and priority requirements for the transport.
0070 CUX, Currencies
A segment to indicate default currencies and exchange rates.
0080 MOA, Monetary amount
A segment to indicate a monetary value for entire consignment,
e.g. insured value, invoice amount, disbursements, etc.
0090 FTX, Free text
A segment to specify free form or processable supplementary
information, such as status of transport, remarks to be printed
on the transport documents (where required), consignment
remarks, insurance instructions, etc., or any other additional
information.
0100 CNT, Control total
A segment to specify totals for a consignment.
0110 GDS, Nature of cargo
A segment to describe the nature of cargo.
0120 Segment group 1: LOC-DTM
A group of segments to specify locations and related
date(s)/time(s) which apply to the entire message, e.g. place
of transhipment.
0130 LOC, Place/location identification
A segment to identify a location applying to the entire
message.
0140 DTM, Date/time/period
A segment to indicate date(s) and time(s) relating to the
location.
0150 Segment group 2: TOD-LOC
A group of segments to specify terms of delivery and related
locations.
0160 TOD, Terms of delivery or transport
A segment to specify the applicable terms of delivery.
0170 LOC, Place/location identification
A segment to specify a location related to the terms of
delivery.
0180 Segment group 3: RFF-DTM
A group of segments containing a reference and constants which
apply to the entire message.
0190 RFF, Reference
A segment to express a reference which applies to the entire
message such as: the document/message number that is to be
updated by this very message (according to data element 1225
Message function code in segment BGM), booking reference,
order number, insurance contract, etc.
0200 DTM, Date/time/period
A segment to indicate date and time relating to the
reference.
0210 Segment group 4: GOR-DTM-LOC-SEL-FTX-SG5
A group of segments to identify customs and other governmental
procedures and required documents.
0220 GOR, Governmental requirements
A segment to indicate applicable governmental procedures
related to import, export and transport of the goods.
0230 DTM, Date/time/period
A segment to indicate date and time related to documents
and/or Customs- and/or governmental procedures for the
consignment (e.g. date of issuing of Customs document,
expiration date of Customs document, etc.).
0240 LOC, Place/location identification
A segment to specify locations associated with Customs-
and/or governmental procedures (e.g. Customs office of exit,
Customs office of destination, etc.).
0250 SEL, Seal number
A segment to identify seals and seal issuer associated with
the Customs procedure and/or Customs document for the
consignment.
0260 FTX, Free text
A segment to provide supplementary governmental requirements
information.
0270 Segment group 5: DOC-DTM
A group of segments to specify required documents by
government.
0280 DOC, Document/message details
A segment to indicate a document required by government.
0290 DTM, Date/time/period
A segment to specify the date/time related to the
required document.
0300 Segment group 6: CPI-RFF-CUX-LOC-MOA
A group of segments to indicate charge methodology which
applies to the entire message.
0310 CPI, Charge payment instructions
A segment to indicate default charge methodology.
0320 RFF, Reference
A segment to indicate a reference relating to the CPI
segment, such as charge reference number.
0330 CUX, Currencies
A segment to specify the payment currency related to the
charge methodology.
0340 LOC, Place/location identification
A segment to identify the place of charge collection.
0350 MOA, Monetary amount
A segment to identify the monetary amount associated with
the charges.
0360 Segment group 7: TCC-LOC-FTX-CUX-PRI-EQN-PCD-MOA-QTY
A group of segments to specify charge calculations associated
with the transport.
0370 TCC, Charge/rate calculations
A segment to specify charge.
0380 LOC, Place/location identification
A segment to indicate a location.
0390 FTX, Free text
A segment to specify processable supplementary information
associated with charge.
0400 CUX, Currencies
A segment to specify currencies associated with charge.
0410 PRI, Price details
A segment to specify price details such as price (e.g. 100
dollar) and unit price basis (e.g. per 1000 kilogram).
0420 EQN, Number of units
A segment to specify the number of units to which the unit
price basis applies.
0430 PCD, Percentage details
A segment to indicate the applicable reduction or surcharge
percentage details.
0440 MOA, Monetary amount
A segment to specify a monetary amount, such as prepaid
amount, discount or total amount.
0450 QTY, Quantity
A segment to indicate a quantity, for example actual weight,
declared weight or chargeable weight.
0460 Segment group 8: TDT-DTM-TSR-SG9-SG10
A group of segments to indicate details of the movement of
goods such as mode and means of transport, locations,
departure, and arrival date(s) and time(s).
0470 TDT, Details of transport
A segment to indicate information related to a certain stage
of the transport, such as mode, means and carrier.
0480 DTM, Date/time/period
A segment to indicate departure/arrival date and time.
0490 TSR, Transport service requirements
A segment to identify contract, conditions of carriage,
services, priority requirements for this stage of transport.
0500 Segment group 9: LOC-DTM
A group of segments to specify a location and date/time
related to this leg of transport.
0510 LOC, Place/location identification
A segment to indicate a location such as origin,
destination, stop off, etc. related to this leg of
transport.
0520 DTM, Date/time/period
A segment to specify a date/time related to the location,
such as arrival date/time of a means of transport at a
specific location.
0530 Segment group 10: RFF-DTM
A group of segments to specify an additional reference
related to the stage of the transport.
0540 RFF, Reference
A segment to specify the additional reference.
0550 DTM, Date/time/period
A segment to identify date and time relating to the
reference.
0560 Segment group 11: NAD-LOC-MOA-SG12-SG13-SG14-SG15-SG16-SG17
A group of segments to identify a party, related references,
locations contacts, required documents, and charges to be paid
by the party.
0570 NAD, Name and address
A segment to identify the party's name, address, and
function.
0580 LOC, Place/location identification
A segment to indicate location where a specific function
will be performed.
0590 MOA, Monetary amount
A segment to identify the monetary amount associated with
the party.
0600 Segment group 12: CTA-COM
A group of segments identifying a contact and its
communications related to the party.
0610 CTA, Contact information
A segment to identify a person or department within a
party.
0620 COM, Communication contact
A segment to identify a communication number of a person
or department to whom communication should be directed.
0630 Segment group 13: DOC-DTM
A group of segments to identify required documents.
0640 DOC, Document/message details
A segment to identify a document required of, by or for
the party.
0650 DTM, Date/time/period
A segment to identify date and time relating to the
reference.
0660 Segment group 14: TCC-CUX-PRI-EQN-PCD-MOA-QTY
A group of segments to specify charges associated with the
party.
0670 TCC, Charge/rate calculations
A segment to specify charges associated with the party.
0680 CUX, Currencies
A segment to specify currency details related to the
freight charge.
0690 PRI, Price details
A segment to specify price details such as price (e.g.
100 dollar) and unit price basis (e.g. per 1000
kilogram).
0700 EQN, Number of units
A segment to specify the number of units to which the
unit price basis applies.
0710 PCD, Percentage details
A segment to indicate the applicable reduction or
surcharge percentage details.
0720 MOA, Monetary amount
A segment to specify a monetary amount, such as prepaid
amount, discount or total amount.
0730 QTY, Quantity
A segment to indicate a quantity, for example actual
weight, declared weight or chargeable weight.
0740 Segment group 15: RFF-DTM
A group of segments to specify a reference related to the
party.
0750 RFF, Reference
A segment to identify a reference used by a party.
0760 DTM, Date/time/period
A segment to indicate date and time relating to the
reference.
0770 Segment group 16: CPI-RFF-CUX-LOC-MOA
A group of segments to identify the charge and its amount to
be paid by the party.
0780 CPI, Charge payment instructions
A segment to identify default charge methodology.
0790 RFF, Reference
A segment to indicate a reference relating to the CPI
segment, such as charge reference number.
0800 CUX, Currencies
A segment to indicate payment currency related to the
charge methodology.
0810 LOC, Place/location identification
A segment to identify the place of charge collection.
0820 MOA, Monetary amount
A segment to identify the monetary amount associated with
the charges.
0830 Segment group 17: TSR-RFF-LOC-TPL-FTX
A group of segments to specify a transport service
requirement and its associated details (such as applicable
commercial agreement) related to the party.
0840 TSR, Transport service requirements
A segment to specify a required service for the
transport, such as re-icing.
0850 RFF, Reference
A segment to identify a commercial agreement related to
the service requirement.
0860 LOC, Place/location identification
A segment to indicate the location where the required
service must be performed, such as place of re-icing.
0870 TPL, Transport placement
A segment to identify the means of transport to which the
service requirement applies.
0880 FTX, Free text
A segment to provide any additional information related
to the service requirement.
0890 Segment group 18: GID-HAN-TMP-RNG-TMD-LOC-MOA-PIA-FTX-PCD-SG19-
GDS-SG20-SG21-SG22-SG23-SG24-SG25-SG27-SG29-
SG30
A group of segments to describe the goods items for which
transport is undertaken.
0900 GID, Goods item details
A segment to identify a goods item for which transport is
undertaken. A goods item can be identified by up to three
levels of packaging.
0910 HAN, Handling instructions
A segment to specify handling instructions relating to the
goods item.
0920 TMP, Temperature
A segment to specify a temperature setting for a goods item.
0930 RNG, Range details
A segment to specify a temperature range setting for a goods
item.
0940 TMD, Transport movement details
A segment to specify transport movement details for a goods
item.
0950 LOC, Place/location identification
A segment to specify a country associated with a goods item,
such as country of origin, or country of destination.
0960 MOA, Monetary amount
A segment to specify a monetary amount associated with a
goods item, such as declared value, FOB value, etc.
0970 PIA, Additional product id
A segment to specify article numbers.
0980 FTX, Free text
A segment to specify processable supplementary information
relating to the goods item.
0990 PCD, Percentage details
A segment to specify percentages related to cargo shipped in
controlled atmosphere equipment such as percentage humidity.
1000 Segment group 19: NAD-DTM-LOC
A group of segments to identify different places of
collection and/or delivery for the goods item.
1010 NAD, Name and address
A segment to specify an address of a place of collection
or delivery for a goods item.
1020 DTM, Date/time/period
A segment to indicate date and time relating to the place
of collection or delivery.
1030 LOC, Place/location identification
A segment to provide location information which is
related to the current party.
1040 GDS, Nature of cargo
A segment to describe the nature of cargo.
1050 Segment group 20: MEA-EQN
A group of segments to specify measurements applicable to a
goods item.
1060 MEA, Measurements
A segment to specify measurements, other than dimensions,
applicable to a goods item.
1070 EQN, Number of units
A segment to specify the number of equipment units to
each of which the given measurement applies.
1080 Segment group 21: DIM-EQN
A group of segments to specify dimensions applicable to a
goods item.
1090 DIM, Dimensions
To specify dimensions applicable to a goods item.
1100 EQN, Number of units
A segment to specify the number of equipment units to
each of which the given dimension applies.
1110 Segment group 22: RFF-DTM
A group of segments to identify references to a goods item.
1120 RFF, Reference
A segment to identify a reference to a goods item.
1130 DTM, Date/time/period
A segment to indicate date and time relating to the
reference.
1140 Segment group 23: PCI-RFF-DTM-GIN
A group of segments to specify marks and numbers of a goods
item.
1150 PCI, Package identification
A segment to specify marks and numbers of a good item.
1160 RFF, Reference
A segment to identify a reference relating to the marks
and numbers.
1170 DTM, Date/time/period
A segment to identify date and time of the reference.
1180 GIN, Goods identity number
A segment to specify identifying numbers related to
transport units, such as batch numbers, serial numbers,
etc.
1190 Segment group 24: DOC-DTM
A group of segments to specify documents and associated
date(s) and time(s) for a goods item.
1200 DOC, Document/message details
A segment to specify a document prepared for a goods
item.
1210 DTM, Date/time/period
A segment to associate date and time with the prepared
document.
1220 Segment group 25: TPL-SG26
A group of segments to identify transport details and
associated measurements for a goods item. This group may be
repeated to indicate the different phases of the movement.
1230 TPL, Transport placement
A segment to identify transport details for a goods item.
1240 Segment group 26: MEA-EQN
A group of segments to identify measurements.
1250 MEA, Measurements
A segment to specify the distribution of a goods item
among the transport details.
1260 EQN, Number of units
A segment to specify the number of equipment units to
each of which the given measurement applies.
1270 Segment group 27: SGP-SG28
A group of segments to specify the distribution of a goods
item among the transport equipment.
1280 SGP, Split goods placement
A segment to identify the equipment in which goods are
transported.
1290 Segment group 28: MEA-EQN
A group of segments to identify measurements.
1300 MEA, Measurements
A segment to specify measurements of that portion of
the goods item in the equipment.
1310 EQN, Number of units
A segment to specify the number of equipment units to
each of which the given measurement applies.
1320 Segment group 29: TCC-CUX-PRI-EQN-PCD-MOA-QTY-LOC
A group of segments to specify charge associated with the
goods item.
1330 TCC, Charge/rate calculations
A segment to specify charge associated with the goods
item.
1340 CUX, Currencies
A segment to specify currencies associated with charge.
1350 PRI, Price details
A segment to specify price details such as price (e.g.
100 dollar) and unit price basis (e.g. per 1000
kilogram).
1360 EQN, Number of units
A segment to specify the number of units to which the
unit price basis applies.
1370 PCD, Percentage details
A segment to indicate the applicable reduction or
surcharge percentage details.
1380 MOA, Monetary amount
A segment to specify a monetary amount, such as prepaid
amount, discount or total amount.
1390 QTY, Quantity
A segment to indicate a quantity, for example actual
weight, declared weight or chargeable weight.
1400 LOC, Place/location identification
A segment to indicate location where a specific function
will be performed.
1410 Segment group 30: DGS-FTX-SG31-SG32-SG33
A group of segments to specify dangerous goods details
related to the goods item. One goods item may be in
different dangerous goods classes.
1420 DGS, Dangerous goods
A segment to indicate the class of dangerous goods,
packing group, etc.
1430 FTX, Free text
A segment to specify the dangerous goods technical name
and to specify any additional dangerous goods
information.
1440 Segment group 31: CTA-COM
A group of segments to identify a contact to whom
communication regarding the dangerous goods can be
directed.
1450 CTA, Contact information
A segment to identify a person or department.
1460 COM, Communication contact
A segment to identify a communication number of a
person or department.
1470 Segment group 32: MEA-EQN
A group of segments to identify dangerous goods
measurements.
1480 MEA, Measurements
A segment to specify measurements of the dangerous
goods.
1490 EQN, Number of units
A segment to specify the number of equipment units to
each of which the given measurement applies.
1500 Segment group 33: SGP-SG34
A group of segments to specify the distribution of the
dangerous goods among the transport equipment.
1510 SGP, Split goods placement
A segment to identify the equipment in which the
dangerous goods are transported.
1520 Segment group 34: MEA-EQN
A group of segments to identify dangerous goods
measurements.
1530 MEA, Measurements
A segment to specify measurements of that portion
of the dangerous goods in the equipment.
1540 EQN, Number of units
A segment to specify the number of equipment units
of which the given measurement applies.
1550 Segment group 35: EQD-EQN-TMD-MEA-DIM-SEL-TPL-HAN-TMP-FTX-RFF-
SG36-SG37-SG38-SG39
A group of segments to specify equipment in which goods are
transported.
1560 EQD, Equipment details
A segment to specify equipment, and equipment size and type
used in the transport.
1570 EQN, Number of units
A segment to specify number of pieces of equipment required.
1580 TMD, Transport movement details
A segment to specify transport movement details for the
equipment.
1590 MEA, Measurements
A segment to specify measurements, other than dimensions,
associated with the equipment, such as weight.
1600 DIM, Dimensions
A segment to specify dimensions applicable to equipment.
1610 SEL, Seal number
A segment to identify seal and seal issuer associated with
the equipment.
1620 TPL, Transport placement
A segment to identify transport details for the equipment.
1630 HAN, Handling instructions
A segment to specify handling instructions for specified
equipment.
1640 TMP, Temperature
A segment to specify a temperature setting for the
equipment.
1650 FTX, Free text
A segment to specify processable supplementary information
associated with the equipment.
1660 RFF, Reference
A segment to specify a reference number to equipment.
1670 Segment group 36: TCC-CUX-PRI-EQN-PCD-MOA-QTY
A group of segments to specify charges associated with the
equipment.
1680 TCC, Charge/rate calculations
A segment to specify a charge associated with the
equipment.
1690 CUX, Currencies
A segment to specify currency details related to the
freight charge.
1700 PRI, Price details
A segment to specify price details such as price (e.g.
100 dollar) and unit price basis (e.g. per 1000
kilogram).
1710 EQN, Number of units
A segment to specify the number of units to which the
unit price basis applies.
1720 PCD, Percentage details
A segment to indicate the applicable reduction or
surcharge percentage details.
1730 MOA, Monetary amount
A segment to specify a monetary amount, such as prepaid
amount, discount or total amount.
1740 QTY, Quantity
A segment to indicate a quantity, for example actual
weight, declared weight or chargeable weight.
1750 Segment group 37: NAD-DTM-LOC
A group of segments to identify different equipment pick-up
or drop-off places.
1760 NAD, Name and address
A segment to specify a pick-up or drop-off address.
1770 DTM, Date/time/period
A segment to indicate date and time relating to pick-up
or drop-off.
1780 LOC, Place/location identification
A segment to provide location information which is
related to the current party.
1790 Segment group 38: EQA-EQN
A group of segments to specify the attached equipment and
related number of pieces.
1800 EQA, Attached equipment
A segment to identify attached or related equipment such
as a chassis attached to a container.
1810 EQN, Number of units
A segment to specify number of pieces of equipment
required.
1820 Segment group 39: DGS-FTX-SG40
A group of segments to specify dangerous goods.
1830 DGS, Dangerous goods
A segment to indicate the dangerous goods regulations
which apply, the class of the dangerous goods, additional
dangerous goods codes, the United Nations Dangerous Goods
(UNDG) number and the shipment flash point.
1840 FTX, Free text
A segment to specify supplementary details regarding the
dangerous goods such as dangerous goods technical name
and other additional information.
1850 Segment group 40: CTA-COM
A group of segments to specify contact information.
1860 CTA, Contact information
A segment to identify a person or department to be
contacted regarding dangerous goods.
1870 COM, Communication contact
A segment to specify communication details of the
dangerous goods contact.
1880 UNT, Message trailer
A service segment ending a message, giving the total number of
segments in the message (including the UNH & UNT) and the
control reference number of the message.
4.2 Segment index (alphabetical sequence by tag)
BGM Beginning of message
CNT Control total
COM Communication contact
CPI Charge payment instructions
CTA Contact information
CUX Currencies
DGS Dangerous goods
DIM Dimensions
DOC Document/message details
DTM Date/time/period
EQA Attached equipment
EQD Equipment details
EQN Number of units
FTX Free text
GDS Nature of cargo
GID Goods item details
GIN Goods identity number
GOR Governmental requirements
HAN Handling instructions
LOC Place/location identification
MEA Measurements
MOA Monetary amount
NAD Name and address
PCD Percentage details
PCI Package identification
PIA Additional product id
PRI Price details
QTY Quantity
RFF Reference
RNG Range details
SEL Seal number
SGP Split goods placement
TCC Charge/rate calculations
TDT Details of transport
TMD Transport movement details
TMP Temperature
TOD Terms of delivery or transport
TPL Transport placement
TSR Transport service requirements
UNH Message header
UNT Message trailer
4.3 Message structure
4.3.1 Segment table
Pos Tag Name S R
0010 UNH Message header M 1
0020 BGM Beginning of message M 1
0030 CTA Contact information C 1
0040 COM Communication contact C 9
0050 DTM Date/time/period C 9
0060 TSR Transport service requirements C 9
0070 CUX Currencies C 9
0080 MOA Monetary amount C 99
0090 FTX Free text C 99
0100 CNT Control total C 9
0110 GDS Nature of cargo C 9
0120 ----- Segment group 1 ------------------ C 99----------+
0130 LOC Place/location identification M 1 |
0140 DTM Date/time/period C 9-----------+
0150 ----- Segment group 2 ------------------ C 2-----------+
0160 TOD Terms of delivery or transport M 1 |
0170 LOC Place/location identification C 9-----------+
0180 ----- Segment group 3 ------------------ C 99----------+
0190 RFF Reference M 1 |
0200 DTM Date/time/period C 9-----------+
0210 ----- Segment group 4 ------------------ C 9-----------+
0220 GOR Governmental requirements M 1 |
0230 DTM Date/time/period C 9 |
0240 LOC Place/location identification C 9 |
0250 SEL Seal number C 9 |
0260 FTX Free text C 9 |
|
0270 ----- Segment group 5 ------------------ C 9----------+|
0280 DOC Document/message details M 1 ||
0290 DTM Date/time/period C 1----------++
0300 ----- Segment group 6 ------------------ C 9-----------+
0310 CPI Charge payment instructions M 1 |
0320 RFF Reference C 99 |
0330 CUX Currencies C 1 |
0340 LOC Place/location identification C 9 |
0350 MOA Monetary amount C 9-----------+
0360 ----- Segment group 7 ------------------ C 99----------+
0370 TCC Charge/rate calculations M 1 |
0380 LOC Place/location identification C 1 |
0390 FTX Free text C 1 |
0400 CUX Currencies C 1 |
0410 PRI Price details C 1 |
0420 EQN Number of units C 1 |
0430 PCD Percentage details C 1 |
0440 MOA Monetary amount C 9 |
0450 QTY Quantity C 9-----------+
0460 ----- Segment group 8 ------------------ C 99----------+
0470 TDT Details of transport M 1 |
0480 DTM Date/time/period C 9 |
0490 TSR Transport service requirements C 9 |
|
0500 ----- Segment group 9 ------------------ C 99---------+|
0510 LOC Place/location identification M 1 ||
0520 DTM Date/time/period C 9----------+|
|
0530 ----- Segment group 10 ------------------ C 9----------+|
0540 RFF Reference M 1 ||
0550 DTM Date/time/period C 1----------++
0560 ----- Segment group 11 ------------------ C 99----------+
0570 NAD Name and address M 1 |
0580 LOC Place/location identification C 9 |
0590 MOA Monetary amount C 9 |
|
0600 ----- Segment group 12 ------------------ C 9----------+|
0610 CTA Contact information M 1 ||
0620 COM Communication contact C 9----------+|
|
0630 ----- Segment group 13 ------------------ C 9----------+|
0640 DOC Document/message details M 1 ||
0650 DTM Date/time/period C 1----------+|
|
0660 ----- Segment group 14 ------------------ C 99---------+|
0670 TCC Charge/rate calculations M 1 ||
0680 CUX Currencies C 1 ||
0690 PRI Price details C 1 ||
0700 EQN Number of units C 1 ||
0710 PCD Percentage details C 1 ||
0720 MOA Monetary amount C 9 ||
0730 QTY Quantity C 9----------+|
|
0740 ----- Segment group 15 ------------------ C 9----------+|
0750 RFF Reference M 1 ||
0760 DTM Date/time/period C 9----------+|
|
0770 ----- Segment group 16 ------------------ C 9----------+|
0780 CPI Charge payment instructions M 1 ||
0790 RFF Reference C 99 ||
0800 CUX Currencies C 1 ||
0810 LOC Place/location identification C 9 ||
0820 MOA Monetary amount C 9----------+|
|
0830 ----- Segment group 17 ------------------ C 99---------+|
0840 TSR Transport service requirements M 1 ||
0850 RFF Reference C 1 ||
0860 LOC Place/location identification C 1 ||
0870 TPL Transport placement C 1 ||
0880 FTX Free text C 9----------++
0890 ----- Segment group 18 ------------------ C 999---------+
0900 GID Goods item details M 1 |
0910 HAN Handling instructions C 1 |
0920 TMP Temperature C 1 |
0930 RNG Range details C 1 |
0940 TMD Transport movement details C 1 |
0950 LOC Place/location identification C 9 |
0960 MOA Monetary amount C 9 |
0970 PIA Additional product id C 9 |
0980 FTX Free text C 9 |
0990 PCD Percentage details C 9 |
|
1000 ----- Segment group 19 ------------------ C 9----------+|
1010 NAD Name and address M 1 ||
1020 DTM Date/time/period C 1 ||
1030 LOC Place/location identification C 9----------+|
1040 GDS Nature of cargo C 9 |
|
1050 ----- Segment group 20 ------------------ C 99---------+|
1060 MEA Measurements M 1 ||
1070 EQN Number of units C 1----------+|
|
1080 ----- Segment group 21 ------------------ C 99---------+|
1090 DIM Dimensions M 1 ||
1100 EQN Number of units C 1----------+|
|
1110 ----- Segment group 22 ------------------ C 9----------+|
1120 RFF Reference M 1 ||
1130 DTM Date/time/period C 9----------+|
|
1140 ----- Segment group 23 ------------------ C 9----------+|
1150 PCI Package identification M 1 ||
1160 RFF Reference C 1 ||
1170 DTM Date/time/period C 1 ||
1180 GIN Goods identity number C 9----------+|
|
1190 ----- Segment group 24 ------------------ C 9----------+|
1200 DOC Document/message details M 1 ||
1210 DTM Date/time/period C 9----------+|
|
1220 ----- Segment group 25 ------------------ C 9----------+|
1230 TPL Transport placement M 1 ||
||
1240 ----- Segment group 26 ------------------ C 9---------+||
1250 MEA Measurements M 1 |||
1260 EQN Number of units C 1---------++|
|
1270 ----- Segment group 27 ------------------ C 999--------+|
1280 SGP Split goods placement M 1 ||
||
1290 ----- Segment group 28 ------------------ C 9---------+||
1300 MEA Measurements M 1 |||
1310 EQN Number of units C 1---------++|
|
1320 ----- Segment group 29 ------------------ C 99---------+|
1330 TCC Charge/rate calculations M 1 ||
1340 CUX Currencies C 1 ||
1350 PRI Price details C 1 ||
1360 EQN Number of units C 1 ||
1370 PCD Percentage details C 1 ||
1380 MOA Monetary amount C 9 ||
1390 QTY Quantity C 9 ||
1400 LOC Place/location identification C 9----------+|
|
1410 ----- Segment group 30 ------------------ C 99---------+|
1420 DGS Dangerous goods M 1 ||
1430 FTX Free text C 99 ||
||
1440 ----- Segment group 31 ------------------ C 9---------+||
1450 CTA Contact information M 1 |||
1460 COM Communication contact C 9---------+||
||
1470 ----- Segment group 32 ------------------ C 9---------+||
1480 MEA Measurements M 1 |||
1490 EQN Number of units C 1---------+||
||
1500 ----- Segment group 33 ------------------ C 999-------+||
1510 SGP Split goods placement M 1 |||
|||
1520 ----- Segment group 34 ------------------ C 9--------+|||
1530 MEA Measurements M 1 ||||
1540 EQN Number of units C 1--------++++
1550 ----- Segment group 35 ------------------ C 999---------+
1560 EQD Equipment details M 1 |
1570 EQN Number of units C 1 |
1580 TMD Transport movement details C 1 |
1590 MEA Measurements C 9 |
1600 DIM Dimensions C 9 |
1610 SEL Seal number C 99 |
1620 TPL Transport placement C 9 |
1630 HAN Handling instructions C 1 |
1640 TMP Temperature C 1 |
1650 FTX Free text C 9 |
1660 RFF Reference C 9 |
|
1670 ----- Segment group 36 ------------------ C 99---------+|
1680 TCC Charge/rate calculations M 1 ||
1690 CUX Currencies C 1 ||
1700 PRI Price details C 1 ||
1710 EQN Number of units C 1 ||
1720 PCD Percentage details C 1 ||
1730 MOA Monetary amount C 9 ||
1740 QTY Quantity C 9----------+|
|
1750 ----- Segment group 37 ------------------ C 9----------+|
1760 NAD Name and address M 1 ||
1770 DTM Date/time/period C 1 ||
1780 LOC Place/location identification C 9----------+|
|
1790 ----- Segment group 38 ------------------ C 99---------+|
1800 EQA Attached equipment M 1 ||
1810 EQN Number of units C 1----------+|
|
1820 ----- Segment group 39 ------------------ C 99---------+|
1830 DGS Dangerous goods M 1 ||
1840 FTX Free text C 9 ||
||
1850 ----- Segment group 40 ------------------ C 9---------+||
1860 CTA Contact information M 1 |||
1870 COM Communication contact C 9---------+++
1880 UNT Message trailer M 1
Copyright United Nations, all rights reserved
UN Economic Commission for Europe
Palais des Nations, CH-1211 Geneva 10, Switzerland
Tel: +41-22 917 2016 Fax: +41-22 917 0037 E-mail: TradeMaster@unece.org
UN/EDIFACT Directories