United Nations Directories  for Electronic Data Interchange for
Administration, Commerce and Transport



UN/EDIFACT






                                           Message Type : ITRRPT
                                           Version      : D
                                           Release      : 01C
                                           Contr. Agency: UN

                                           Revision     : 2
                                           Date         : 2001-11-07






SOURCE: D1 Materials Management (SWG)



                               CONTENTS

                   In transit report detail message

0.     INTRODUCTION

1.     SCOPE

       1.1   Functional definition

       1.2   Field of application

       1.3   Principles

2.     REFERENCES

3.     TERMS AND DEFINITIONS

       3.1   Standard terms and definitions

4.     MESSAGE DEFINITION

       4.1   Segment clarification
             4.1.1 Header section
             4.1.2 Detail section
             4.1.3 Summary section

       4.2   Segment index (alphabetical sequence by tag)

       4.3   Message structure
             4.3.1 Segment table










----------------------------------------------------------------------
For general information on UN standard message types see UN Trade Data
Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM
General Introduction
----------------------------------------------------------------------



0.     INTRODUCTION

       This specification provides the definition of the In transit
       report detail message (ITRRPT) to be used in Electronic Data
       Interchange (EDI) between trading partners involved in
       administration, commerce and transport.

1.     SCOPE

1.1    Functional definition

       A message specifying to a delivery party, the details of goods
       within grouped consignments despatched by the delivering party.
       This message is used in a multi-step transportation process
       involving only consignors, grouping centres and consignees.
       
       A grouping centre (consolidation point) is a logistic point
       where goods are moved from one means of transport to another,
       to optimize transport cost. This message is not to be used to
       identify additional services related to the despatched goods
       (warehousing, packaging, etc.) which may be provided by the
       third party at the same location along with the Grouping
       service.

1.2    Field of application

       The In transit report detail message may be used for both
       national and international applications. It is based on
       universal practice related to administration, commerce and
       transport, and is not dependent on the type of business or
       industry.

1.3    Principles

       An In Transit Report Detail message always relates to one or
       many Despatch Advice messages sent to the parties concerned.
       This message refers to the goods identified in the referenced
       Despatch Advice messages
       
       When the recipient of the message is a grouping centre the
       message allows the grouping centre to consolidate consignments
       received from one or more original consignors or other grouping
       centres and despatch them to another grouping centre or to the
       consignee.
       
       When the recipient of the message is the consignee, it allows
       the consignee to match this message with the corresponding
       Despatch Advice messages already received from the
       consignor(s). In case of differences, the message allows the
       consignee to identify variances caused by a split consignment
       or by missing goods.
       
       The Cargo/goods handling and movement message (HANMOV) has been
       designed to identify additional handling services related to
       the despatched goods, such as storage or (re-)packaging.
       
       An ITRRPT message specifies the details of despatched goods
       (possibly re-grouped), corresponding to one or more original
       despatch advices; the references to the consignment(s) by which
       they transported can be included (the seller's and buyer's
       perspective). The message does not necessarily provide full
       consignment details as required for transport purposes ( the
       carrier's perspective).
       
       The message refers to goods despatched on a single unit of
       transport (e.g. a single truck, a single railway wagon etc.).
       
       The sender of the message may be:
       
       . The consignor; in this case the message may refer to several
       buyers and consignees, but to only one seller.
       
       . A grouping centre; in this case the message may refer to
       several buyers, consignors, consignees and sellers.
       
       The recipient of the message may be:
       
       . A grouping centre; in this case the message may refer to
       several sellers, consignors, consignees and buyers.
       
       . The consignee; in this case the message may refer to several
       sellers, but only one buyer and one consignee.
       
       The following diagram illustrates the information flows.
       
       
                               INFORMATION FLOWS
       
       +--------------------------------->---------------------------+
       | DESADV 1                                                    |
       |                                 DESADV 2                    |
       |                   +---------->----------------------------+ |
       |                   |   -----------------------------------+| |
       |                   |   |  DESADV 3       +---------->----+|| |
       |                   |   |                 |  DESADV 4     ||| |
       +------------+  +---|---|----+        +------------+      ||| |
       | consignor 1|  | consignor 2|     +--| consignor 3|      ||| |
       +------------+  +------------+     |  +------------+      ||| |
            |                 |           |         |            ||| |
          ITRRPT a        ITRRPT b    ITRRPT c   DESADV 5        ||| |
            |                 |           |         |            ||| |
         (DESADV1)        (DESADV2+3) (DESADV4+5)   |            ||| |
            |                  | +---<----+         |            ||| |
            |   +-----------------+           +-----------+      ||| |
            |   |GROUPING CENTER 1|           |CONSIGNEE  |      ||| |
            |   +-----------------+           |FACTORY 1  |      ||| |
            V         |         |             +-----------+      ||| |
            |         |         |               |                ||| |
            |      ITRRPT d     +-------------->+                ||| |
            |     (DES|ADV2+3+4)    ITRRPT e                     ||| |
            |         V            (DESADV 5)                    ||| |
       +-----------------+                    +------------+     ||| |
       |GROUPING CENTER 2|--------------->----|  CONSIGNEE |--<--+|| |
       +-----------------+    ITRRPT f        | FACTORY 2  |--<---+| |
            |                 (DESADV3+4)     +------------+       | |
            |                                                      | |
            |                                 +-------------+      | |
            +------------------->-------------|CONSIGNEE    |      | |
                  ITRRPT a                    |ADVANCED     |--<---+ |
                  (DESADV1+2)                 |WAREHOUSE 3  |--<-----+
                                              +-------------+         
       Remarks;
       
       - The indication (DESADVn) below ITRRPT n indicates that the
       ITRRPT message match the corresponding DESADV directly sent to
       the consignee.
       - The material flow corresponds to the ITRRPT message flow.

2.     REFERENCES

       See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General
       Introduction, Section 1.

3.     TERMS AND DEFINITIONS

3.1    Standard terms and definitions

       See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General
       Introduction, Section 2.

4.     MESSAGE DEFINITION

4.1    Segment clarification

       This section should be read in conjunction with the segment
       table which indicates mandatory, conditional and repeating
       requirements.
       
       The following guidelines and principles apply to the whole
       message and are intended to facilitate the understanding and
       implementation of the message:
       
       All specified dates/times should be in the format
       'ccyymmdd'/'hhmm' unless all parties involved in the
       transaction agree that there is a functional requirement for an
       alternative format.
       Periods should be specified as whole numbers representing the
       required period as indicated in the format qualifier (weeks,
       months, etc.)
       
       Where a choice of code or text is given only the code element
       should be used wherever possible.
       
       Care must be taken to avoid the conflicting use of qualifiers.
       
       Free text information within the message should be avoided as
       this inhibits automatic processing.

4.1.1  Header section


       Information to be provided in the Header section:

0010   UNH, Message header
       A service segment starting and uniquely identifying a message.
       The message type code for the In transit report detail message
       is ITRRPT.

       Note: In transit report detail messages conforming to this
       document must contain the following data in segment UNH,
       composite S009:

       Data element  0065 ITRRPT
                     0052 D
                     0054 01C
                     0051 UN

0020   BGM, Beginning of message
       A segment to indicate the type and function of the In Transit
       Report Detail message and to transmit its unique identifying
       number.

0030   DTM, Date/time/period
       A segment specifying dates and, or time and, or period relevant
       to the whole message. The DTM segment shall be used at least
       once to specify the date and where relevant the time of the
       message.

0040   MEA, Measurements
       A segment specifying dimensions relevant for the entire
       consignment such as the total weight and volume of the goods.

0050   CUX, Currencies
       This segment is used to specify currencies and relevant details
       for the rate of exchange.


0060   Segment group 1:  RFF-DTM
       A group of segments referencing documents relating to the whole
       message, and when necessary their dates.

0070      RFF, Reference
          A segment for referencing documents relating to the whole
          message, e.g. way bill.

0080      DTM, Date/time/period
          Date and, or time and, or period of the referred document.


0090   Segment group 2:  NAD-LOC-SG3-SG4
       A group of segments identifying names, addresses and locations
       relevant to the whole message.

0100      NAD, Name and address
          A segment for identifying names and addresses and their
          functions relevant for the whole message. Identification of
          the parties involved is recommended for the In Transit
          Grouping message. They are to be given in the NAD segment.

0110      LOC, Place/location identification
          A segment indicating more details regarding specific places
          or locations, e.g. internal site and, or building number.


0120      Segment group 3:  RFF-DTM
          A group of segment giving references relating to the
          identified party and when necessary their dates.

0130         RFF, Reference
             A segment giving references relating to the identified
             party.

0140         DTM, Date/time/period
             Date and, or time and, or period of the referred
             document.


0150      Segment group 4:  CTA-COM
          A group of segments to identify person, function, department
          and appropriate numbers to whom communication should be
          directed.

0160         CTA, Contact information
             A segment to identify person, function, department to
             whom communication should be directed.

0170         COM, Communication contact
             Identify communication types and numbers for person,
             function, department identified in the CTA segment.


0180   Segment group 5:  TDT-PCD-SG6
       A group of segments specifying details of the mode and means of
       transport and the percentage of its capacity used by the
       grouped consignment.

0190      TDT, Details of transport
          A segment specifying the carriage, mode and means of
          transport and its identification.

0200      PCD, Percentage details
          A segment indicating the utilized capacity of the means of
          transport.


0210      Segment group 6:  LOC-DTM
          A group of segments giving relevant transport nodes.

0220         LOC, Place/location identification
             A segment indicating relevant transport nodes.

0230         DTM, Date/time/period
             A segment giving the date and, or time and, or period
             information of departure and, or arrival for the
             specified location.


0240   Segment group 7:  EQD-MEA-SEL-EQA-PCD-SG8
       A group of segments describing the characteristics of the
       equipment used for the transportation of goods and where
       relevant how they are handled.

0250      EQD, Equipment details
          A segment to define information regarding equipment used.

0260      MEA, Measurements
          A segment specifying the physical measurements of the
          equipment.

0270      SEL, Seal number
          A segment specifying a seal number connected to a specific
          equipment named in the EQD segment.

0280      EQA, Attached equipment
          A segment identifying equipment either attached to the
          equipment described in the EQD segment above. This attached
          equipment may be further defined in a subsequent EQD
          segment.

0290      PCD, Percentage details
          A segment indicating the utilized capacity of the equipment.


0300      Segment group 8:  HAN-FTX
          A group of segments providing information on hazardous goods
          and their handling.

0310         HAN, Handling instructions
             A segment providing handling instruction or notification
             of hazardous materials, or both, in the specified
             equipment.

0320         FTX, Free text
             A segment with free text information, in coded or clear
             form, to give further clarification on hazardous goods
             and their handling.

4.1.2  Detail section

       Information to be provided in the Detail section:


0330   Segment group 9:  GIS-CDI-DTM-ALI-MEA-MOA-SG10-SG11-SG14-SG15
       A group of segments giving details of a set of goods originally
       described in a single Despatch Advice directly sent to the
       consignee (see the flow diagram in section 1.3 Principles).

0340 X    GIS, General indicator
          A segment used to indicate the start of a loop related to a
          given original despatch using data element 7365 Processing
          indicator description code identifying a consignment driven
          process.

0350      CDI, Physical or logical state
          A segment used to indicate, if the original despatch has
          been split, and if yes which part of the original despatch
          is described (first, intermediate, last).

0360      DTM, Date/time/period
          A segment giving date and, or time and, or period relevant
          to the original loop of despatch.

0370      ALI, Additional information
          A segment indicating special conditions owing to origin,
          customs preference or commercial factors.

0380      MEA, Measurements
          A segment specifying dimension of the set of goods as
          detailed in the segment group, such as weight and volume.

0390      MOA, Monetary amount
          A segment specifying the packing and transport costs
          applicable to the despatch for customs clearance.


0400      Segment group 10: RFF-DTM
          A group of segments giving references and where necessary
          their dates, relating to the specified goods, e.g. original
          despatch advice, contract number.

0410         RFF, Reference
             This segment must be used to refer to the original
             despatch advice number. It may also be used to give
             references related to the original despatch advice e.g.
             purchase order, delivery schedule message, import or
             export license.

0420         DTM, Date/time/period
             Date and, or time and, or period of the reference.


0430      Segment group 11: NAD-LOC-SG12-SG13
          A group of segments identifying names and addresses,
          locations, and required supporting documents relevant to the
          goods as detailed in the GIS-group.

0440         NAD, Name and address
             A segment for specifying parties by their name, address
             and function, relevant to the referred goods, e.g.
             consignor, consignee, freight forwarder.

0450         LOC, Place/location identification
             A segment indicating specific location details for the
             specified party, e.g. internal site or building number.


0460         Segment group 12: RFF-DTM
             A group of segments giving references relevant to the
             specified party.

0470            RFF, Reference
                A segment for referencing documents relating to the
                party specified by the NAD segment.

0480            DTM, Date/time/period
                Date and, or time and, or period of the reference.


0490         Segment group 13: CTA-COM
             A group of segments to identify person, function,
             department and appropriate numbers to whom communication
             should be directed.

0500            CTA, Contact information
                A segment to identify person, function, department to
                whom communication should be directed.

0510            COM, Communication contact
                Identify communication types and numbers for person,
                function, department identified in CTA.


0520      Segment group 14: TOD-LOC-FTX
          A group of segments indicating terms of delivery.

0530         TOD, Terms of delivery or transport
             A segment indicating the terms of delivery for the
             referred goods.

0540         LOC, Place/location identification
             A segment indicating locations qualifying the terms of
             delivery.

0550         FTX, Free text
             Additional free text giving terms of delivery. In
             computer to computer exchanges such text will normally
             require the receiver to process this segment manually.


0560      Segment group 15: CPS-FTX-SG16-SG20
          A group of segments providing details of all packages and,
          or despatched products. This segment group provides also the
          capability to give the hierarchical top-down relationship of
          all package levels.

0570         CPS, Consignment packing sequence
             To identify the sequence in which physical packing is
             presented in the consignment, and optionally to identify
             the hierarchical relationship between packing layers.

0580         FTX, Free text
             A segment with free text information, in coded or clear
             form, to give further clarification, when required, to
             the packaging sequence. In computer to computer exchanges
             such text will normally require the receiver to process
             this segment manually.


0590         Segment group 16: PAC-MEA-QTY-SG17-SG18
             A group of segments identifying, physical dimensions,
             marks and numbers, quantities, date and time information,
             handling information and information about packaging at
             this level.

0600            PAC, Package
                A segment specifying the number and type of package or
                physical units and the physical type of packaging for
                the despatched goods.

0610            MEA, Measurements
                A segment specifying measurements of the package.

0620            QTY, Quantity
                This segment identifies the quantity of items included
                in the package. Depending on the packaging level,
                these items are lower level packages or product at the
                lowest packaging level.


0630            Segment group 17: HAN-FTX
                A group of segments providing information on hazardous
                goods and handling.

0640               HAN, Handling instructions
                   A segment providing instructions and notification
                   of hazardous materials contained in the specified
                   package.

0650               FTX, Free text
                   A segment with free text information, in coded or
                   clear form, to give further clarification, when
                   required, to hazardous goods and their handling. In
                   computer to computer exchanges such text will
                   normally require the receiver to process this
                   segment manually.


0660            Segment group 18: PCI-RFF-CDI-DTM-SG19
                A group of segments specifying markings and package
                numbers and the relevant conditions.

0670               PCI, Package identification
                   A segment specifying markings and labels used on
                   individual packages.

0680               RFF, Reference
                   A segment for referencing the package
                   identification e.g. master label number of the
                   package containing all lower level packages
                   identified in the GIN segment triggering segment
                   group 19.

0690               CDI, Physical or logical state
                   A segment to give conditions attached to the
                   package referenced by the preceding RFF segment.

0700               DTM, Date/time/period
                   A segment for date/time/period as related to the
                   package, e.g. production date, expiry date, etc.


0710               Segment group 19: GIN-CDI-DLM
                   A group of segments giving package identification
                   numbers and where relevant delivery limitation
                   information.

0720                  GIN, Goods identity number
                      A segment providing identity numbers being
                      applied to the described packages.

0730                  CDI, Physical or logical state
                      An indicator to reflect specific condition valid
                      for all packages identified by the actual GIN
                      segment.

0740                  DLM, Delivery limitations
                      A segment to identify any limitation on delivery
                      of goods e.g. hold until final approval by
                      supplier.


0750         Segment group 20: LIN-PIA-IMD-MEA-CDI-QTY-ALI-GIN-GIR-
                               DTM-MOA-FTX-SG21-SG22-SG23
             A group of segments providing details of the individual
             items contained in the packages. The segments ALI and MOA
             are only to be used in case they are needed for customs
             clearance.

0760            LIN, Line item
                A segment identifying the product.

0770            PIA, Additional product id
                A segment providing additional product identification.

0780            IMD, Item description
                A segment for describing the product. This segment
                should be used for products that cannot be identified
                by a product code or article number.

0790            MEA, Measurements
                A segment specifying physical measurements of the
                delivery product in original or unpacked form.

0800            CDI, Physical or logical state
                A segment to reflect specific conditions related to
                the product.

0810            QTY, Quantity
                A segment to give quantity information.

0820            ALI, Additional information
                A segment indicating that the product is subjected to
                special conditions owing to origin, customs
                preference, or commercial factors.

0830            GIN, Goods identity number
                A segment providing identity numbers applied to the
                product, e.g. serial numbers for assembled equipments.

0840            GIR, Related identification numbers
                A segment providing set of related identification
                numbers for the product, e.g. engine number, chassis
                number and transmission number for vehicle.

0850            DTM, Date/time/period
                A segment providing date and, or time information
                related to the product e.g. production date.

0860            MOA, Monetary amount
                A segment to provide the custom value of the product.

0870            FTX, Free text
                A segment with free text information, in coded or
                clear form, to give further clarification, when
                required, to the product. In computer to computer
                exchanges such text will normally require the receiver
                to process this segment manually.


0880            Segment group 21: RFF-DTM
                A group of segments to give reference numbers and
                dates for the product.

0890               RFF, Reference
                   A segment to provide references related to the
                   product.

0900               DTM, Date/time/period
                   A segment for date and, or time and, or period as
                   related to the reference.


0910            Segment group 22: DGS-QTY-FTX
                A group of segments giving indication about dangerous
                goods.

0920               DGS, Dangerous goods
                   A segment to indicate the class of dangerous goods.

0930               QTY, Quantity
                   A segment to specify quantity of the given
                   dangerous goods.

0940               FTX, Free text
                   A segment with free text information, in coded or
                   clear form, to give further clarification, when
                   required, to dangerous goods. In computer to
                   computer exchanges such text will normally require
                   the receiver to process this segment manually.


0950            Segment group 23: PCI-CDI-DTM-QTY-MEA-SG24-SG25
                A group of segments identifying one specific package
                or a number of packages, their marks and numbers,
                conditions, measurements, quantities, date and time
                information and handling instructions, used for
                specified product.

0960               PCI, Package identification
                   A segment specifying marking and labels used on
                   individual used on individual packages or a range
                   of them.

0970               CDI, Physical or logical state
                   A segment to give conditions attached to the
                   corresponding packages.

0980               DTM, Date/time/period
                   A segment indicating the date and, or time details
                   relating to the goods in the package e.g.
                   expiration date.

0990               QTY, Quantity
                   A segment to specify quantity per package.

1000               MEA, Measurements
                   A segment specifying physical measurements of
                   packages.


1010               Segment group 24: GIN-CDI-DLM
                   A group of segments giving package identification
                   numbers and where relevant delivery limitation
                   information.

1020                  GIN, Goods identity number
                      A segment providing identification numbers being
                      applied to the packages.

1030                  CDI, Physical or logical state
                      A segment to give conditions attached to the
                      package(s) identified in the GIN segment.

1040                  DLM, Delivery limitations
                      A segment to identify any limitation on delivery
                      of goods e.g. hold until final approval by
                      supplier.


1050               Segment group 25: HAN-FTX-GIN
                   A group of segments providing information on
                   hazardous material and handling.

1060                  HAN, Handling instructions
                      A segment providing information on handling and
                      notification of hazardous materials.

1070                  FTX, Free text
                      A segment with free text information, in coded
                      or clear form, to give further clarification,
                      when required, for hazardous materials. In
                      computer to computer exchanges such text will
                      normally require the receiver to process this
                      segment manually.

1080                  GIN, Goods identity number
                      A segment providing identification numbers being
                      applied to the package.

4.1.3  Summary section

       Information to be provided in the Summary section:

1090   CNT, Control total
       A segment by which control totals may by provided by sender
       checking by receiver.

1100   UNT, Message trailer
       A service segment ending a message, giving the total number of
       segments in the message (including the UNH & UNT) and the
       control reference number of the message.

4.2    Segment index (alphabetical sequence by tag)

          ALI Additional information
          BGM Beginning of message
          CDI Physical or logical state
          CNT Control total
          COM Communication contact
          CPS Consignment packing sequence
          CTA Contact information
          CUX Currencies
          DGS Dangerous goods
          DLM Delivery limitations
          DTM Date/time/period
          EQA Attached equipment
          EQD Equipment details
          FTX Free text
          GIN Goods identity number
          GIR Related identification numbers
       X  GIS General indicator
          HAN Handling instructions
          IMD Item description
          LIN Line item
          LOC Place/location identification
          MEA Measurements
          MOA Monetary amount
          NAD Name and address
          PAC Package
          PCD Percentage details
          PCI Package identification
          PIA Additional product id
          QTY Quantity
          RFF Reference
          SEL Seal number
          TDT Details of transport
          TOD Terms of delivery or transport
          UNH Message header
          UNT Message trailer

4.3 Message structure 4.3.1 Segment table Pos Tag Name S R HEADER SECTION 0010 UNH Message header M 1 0020 BGM Beginning of message M 1 0030 DTM Date/time/period C 10 0040 MEA Measurements C 5 0050 CUX Currencies C 9 0060 ----- Segment group 1 ------------------ C 10----------+ 0070 RFF Reference M 1 | 0080 DTM Date/time/period C 5-----------+ 0090 ----- Segment group 2 ------------------ C 10----------+ 0100 NAD Name and address M 1 | 0110 LOC Place/location identification C 10 | | 0120 ----- Segment group 3 ------------------ C 10---------+| 0130 RFF Reference M 1 || 0140 DTM Date/time/period C 5----------+| | 0150 ----- Segment group 4 ------------------ C 10---------+| 0160 CTA Contact information M 1 || 0170 COM Communication contact C 5----------++ 0180 ----- Segment group 5 ------------------ C 10----------+ 0190 TDT Details of transport M 1 | 0200 PCD Percentage details C 5 | | 0210 ----- Segment group 6 ------------------ C 10---------+| 0220 LOC Place/location identification M 1 || 0230 DTM Date/time/period C 10---------++ 0240 ----- Segment group 7 ------------------ C 10----------+ 0250 EQD Equipment details M 1 | 0260 MEA Measurements C 5 | 0270 SEL Seal number C 99 | 0280 EQA Attached equipment C 5 | 0290 PCD Percentage details C 5 | | 0300 ----- Segment group 8 ------------------ C 10---------+| 0310 HAN Handling instructions M 1 || 0320 FTX Free text C 10---------++ DETAIL SECTION 0330 ----- Segment group 9 ------------------ M 99----------+ 0340 X GIS General indicator M 1 | 0350 CDI Physical or logical state C 1 | 0360 DTM Date/time/period C 10 | 0370 ALI Additional information C 5 | 0380 MEA Measurements C 5 | 0390 MOA Monetary amount C 5 | | 0400 ----- Segment group 10 ------------------ M 10---------+| 0410 RFF Reference M 1 || 0420 DTM Date/time/period C 1----------+| | 0430 ----- Segment group 11 ------------------ C 10---------+| 0440 NAD Name and address M 1 || 0450 LOC Place/location identification C 10 || || 0460 ----- Segment group 12 ------------------ C 10--------+|| 0470 RFF Reference M 1 ||| 0480 DTM Date/time/period C 1---------+|| || 0490 ----- Segment group 13 ------------------ C 10--------+|| 0500 CTA Contact information M 1 ||| 0510 COM Communication contact C 5---------++| | 0520 ----- Segment group 14 ------------------ C 10---------+| 0530 TOD Terms of delivery or transport M 1 || 0540 LOC Place/location identification C 5 || 0550 FTX Free text C 5----------+| | 0560 ----- Segment group 15 ------------------ C 9999-------+| 0570 CPS Consignment packing sequence M 1 || 0580 FTX Free text C 5 || || 0590 ----- Segment group 16 ------------------ C 9999------+|| 0600 PAC Package M 1 ||| 0610 MEA Measurements C 10 ||| 0620 QTY Quantity C 10 ||| ||| 0630 ----- Segment group 17 ------------------ C 10-------+||| 0640 HAN Handling instructions M 1 |||| 0650 FTX Free text C 10-------+||| ||| 0660 ----- Segment group 18 ------------------ C 9999-----+||| 0670 PCI Package identification M 1 |||| 0680 RFF Reference C 1 |||| 0690 CDI Physical or logical state C 1 |||| 0700 DTM Date/time/period C 5 |||| |||| 0710 ----- Segment group 19 ------------------ C 99------+|||| 0720 GIN Goods identity number M 1 ||||| 0730 CDI Physical or logical state C 1 ||||| 0740 DLM Delivery limitations C 999-----+++|| || 0750 ----- Segment group 20 ------------------ C 1---------+|| 0760 LIN Line item M 1 ||| 0770 PIA Additional product id C 10 ||| 0780 IMD Item description C 99 ||| 0790 MEA Measurements C 10 ||| 0800 CDI Physical or logical state C 1 ||| 0810 QTY Quantity C 10 ||| 0820 ALI Additional information C 10 ||| 0830 GIN Goods identity number C 999 ||| 0840 GIR Related identification numbers C 999 ||| 0850 DTM Date/time/period C 5 ||| 0860 MOA Monetary amount C 1 ||| 0870 FTX Free text C 5 ||| ||| 0880 ----- Segment group 21 ------------------ C 10-------+||| 0890 RFF Reference M 1 |||| 0900 DTM Date/time/period C 1--------+||| ||| 0910 ----- Segment group 22 ------------------ C 10-------+||| 0920 DGS Dangerous goods M 1 |||| 0930 QTY Quantity C 1 |||| 0940 FTX Free text C 5--------+||| ||| 0950 ----- Segment group 23 ------------------ C 9999-----+||| 0960 PCI Package identification M 1 |||| 0970 CDI Physical or logical state C 1 |||| 0980 DTM Date/time/period C 5 |||| 0990 QTY Quantity C 1 |||| 1000 MEA Measurements C 10 |||| |||| 1010 ----- Segment group 24 ------------------ C 10------+|||| 1020 GIN Goods identity number M 1 ||||| 1030 CDI Physical or logical state C 1 ||||| 1040 DLM Delivery limitations C 999-----+|||| |||| 1050 ----- Segment group 25 ------------------ C 10------+|||| 1060 HAN Handling instructions M 1 ||||| 1070 FTX Free text C 5 ||||| 1080 GIN Goods identity number C 9999----+++++ SUMMARY SECTION 1090 CNT Control total C 1 1100 UNT Message trailer M 1

Copyright United Nations, all rights reserved
 
UN Economic Commission for Europe
Palais des Nations, CH-1211 Geneva 10, Switzerland
Tel: +41-22 917 2016 Fax: +41-22 917 0037 E-mail: TradeMaster@unece.org
 
UN/EDIFACT Directories