United Nations Directories for Electronic Data Interchange for
Administration, Commerce and Transport
UN/EDIFACT
United Nations Directories for Electronic Data Interchange for |
Message Type : QALITY
Version : D
Release : 01C
Contr. Agency: UN
Revision : 4
Date : 2001-11-07
SOURCE: D1 Materials Management (SWG)
CONTENTS
Quality data message
0. INTRODUCTION
1. SCOPE
1.1 Functional definition
1.2 Field of application
1.3 Principles
2. REFERENCES
3. TERMS AND DEFINITIONS
3.1 Standard terms and definitions
4. MESSAGE DEFINITION
4.1 Segment clarification
4.1.1 Header section
4.1.2 Detail section
4.2 Segment index (alphabetical sequence by tag)
4.3 Message structure
4.3.1 Segment table
----------------------------------------------------------------------
For general information on UN standard message types see UN Trade Data
Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM
General Introduction
----------------------------------------------------------------------
0. INTRODUCTION
This specification provides the definition of the Quality data
message (QALITY) to be used in Electronic Data Interchange
(EDI) between trading partners involved in administration,
commerce and transport.
1. SCOPE
1.1 Functional definition
A message to enable the transmission of the results of tests
performed to satisfy a specified product or process
requirement. The content includes, but is not limited to, test
data and measurements, statistical information, and the testing
methods employed.
1.2 Field of application
The Quality data message may be used for both national and
international applications. It is based on universal practice
related to administration, commerce and transport, and is not
dependent on the type of business or industry.
1.3 Principles
- A Quality Data Message detail line may refer to either goods
items or services.
- The values within a Quality Data Message may refer to:
. a product/service,
. a product via batch references,
. process type information of a product.
- A Quality Data Message may contain discrete or statistical
values as well as product specification values.
2. REFERENCES
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General
Introduction, Section 1.
3. TERMS AND DEFINITIONS
3.1 Standard terms and definitions
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General
Introduction, Section 2.
4. MESSAGE DEFINITION
4.1 Segment clarification
This section should be read in conjunction with the segment
table which indicates mandatory, conditional and repeating
requirements.
The following guidelines and principles apply to the whole
message and are intended to facilitate the understanding and
implementation of the message:
All specified dates/times should be in the format
'ccyymmdd'/'hhmm' unless all parties involved in the
transaction agree that there is a functional requirement for an
alternative format. Periods should be specified as whole
numbers representing the required period as indicated in the
format qualifier (weeks, months, etc.)
Where a choice of code or text is given only the code element
should be used wherever possible.
Conditional data that is not required in the message should not
be included.
Care must be taken that the segment qualifier in dependent
segments do not conflict with the segment qualifier of the
trigger segment of a group.
Free text information within the message should be avoided as
this inhibits automatic processing.
4.1.1 Header section
Information to be provided in the Header section:
0010 UNH, Message header
A service segment starting and uniquely identifying a message.
The message type code for the Quality data message is QALITY.
Note: Quality data messages conforming to this document must
contain the following data in segment UNH, composite S009:
Data element 0065 QALITY
0052 D
0054 01C
0051 UN
0020 BGM, Beginning of message
A segment by which the sender uniquely identifies the Quality
Data Message by means of its type and number.
0030 DTM, Date/time/period
A segment specifying general dates and, when relevant, times
related to the whole message. The segment must be specified at
least once to identify the quality data message date.
Example of the use of this DTM-segment is : date/time frame of
reported data that apply to the whole quality data message.
The Date/time/period segment within other segment groups should
be used whenever the date/time/period requires to be logically
related to another specified data item; e.g. date of
measurement must be specified within the measurement segment
group.
0040 IMD, Item description
A segment for describing the product involved.
0050 MEA, Measurements
A segment to allow physical measurements and dimensions to be
stated, where this is required for identification of the
product.
0060 FTX, Free text
A segment with free text information, in coded or clear form,
to give further clarification, when required, to the whole
message. In computer to computer exchanges such text will
normally require the receiver to handle this segment manually.
0070 Segment group 1: RFF-DTM
A segment group for referencing documents and where necessary,
their dates, relating to the whole message, e.g. purchase
order, shipment/consignment number.
0080 RFF, Reference
A segment identifying the referenced document by its number
and where appropriate, a line number within that document.
0090 DTM, Date/time/period
A segment specifying the date/time of the referenced
document.
0100 Segment group 2: NAD-LOC-SG3-SG4
A group of segments identifying the parties relevant to the
whole Quality Data Message, with associated information.
0110 NAD, Name and address
A segment identifying names and addresses of parties, in
coded or clear form, and their function relevant for the
whole Quality Data Message. Identification of the Sender and
Receiver party is mandatory for the Quality Data Message.
They are to be given in the NAD segment.
0120 LOC, Place/location identification
A segment indicating more details regarding specific
locations related to the party specified in the NAD-
segment, e.g. internal site/building number.
0130 Segment group 3: RFF-DTM
A segment group giving references and where necessary, date
information only relevant to the specified party.
0140 RFF, Reference
A segment identifying the reference by its number and
where appropriate a line number within a document.
0150 DTM, Date/time/period
A segment specifying the date/time of the reference.
0160 Segment group 4: CTA-COM
A group of segments giving contact details of the specific
person or department within the party identified in the NAD
segment.
0170 CTA, Contact information
A segment to identify a person or department, and their
function, to whom communications should be directed.
0180 COM, Communication contact
A segment to identify a communication type and number for
the contact specified in the CTA segment.
4.1.2 Detail section
Information to be provided in the Detail section:
0190 Segment group 5: LIN-PIA-IMD-MEA-PSD-SPS-DTM-QTY-FTX-SG6-SG7-
SG10-SG12-SG20-SG30
A group of segments providing the relevant quality data for the
specified product.
0200 LIN, Line item
A segment identifying the line item by its number and
additionally, identifying the product involved by a product
identification number.
Other product identification numbers are specified in the
following PIA segment, e.g. Customer part number, etc.
0210 PIA, Additional product id
A segment providing additional product identification to
that specified in the LIN segment, e.g. Buyer part number.
0220 IMD, Item description
A segment for describing the product involved. This segment
should be used for products that cannot be identified by a
product code or article number.
0230 MEA, Measurements
A segment to allow physical measurements and dimensions to
be stated, where this is required for identification of the
product.
0240 PSD, Physical sample description
A segment to define the physical sample parameters,
associated with a test, resulting in discrete measurements.
If used in this position, the values apply to all following
values of product properties.
0250 SPS, Sampling parameters for summary statistics
A segment to define the sampling parameters associated with
summary statistics reported. If used in this position, the
values apply to all following values of product properties.
0260 DTM, Date/time/period
A segment specifying date/time/period details to the line
item only.
0270 QTY, Quantity
A segment to enable quantity information to be specified.
0280 FTX, Free text
A segment with free text in coded or clear form, to give
further clarification, when required, for the line item. In
computer to computer exchanges such text will normally
require the receiver to handle this segment manually.
0290 Segment group 6: RFF-DTM
A segment group for referencing documents relating to the
line item and where necessary, their dates.
0300 RFF, Reference
A segment identifying the referenced document by its
number and where appropriate, a line number within that
document.
0310 DTM, Date/time/period
A segment specifying the date/time of the referenced
document.
0320 Segment group 7: NAD-LOC-SG8-SG9
A group of segments identifying the parties with associated
information, relevant to the line item only.
0330 NAD, Name and address
A segment identifying names and addresses of parties, in
coded or clear form, and their function relevant for the
line item.
0340 LOC, Place/location identification
A segment indicating more details regarding specific
locations related to the party specified in the NAD-
segment, e.g. internal site/building number.
0350 Segment group 8: RFF-DTM
A segment group giving references and where necessary,
date information only relevant to the specified party.
0360 RFF, Reference
A segment identifying the reference by its number and
where appropriate a line number within a document.
0370 DTM, Date/time/period
A segment specifying the date and/or time of the
reference.
0380 Segment group 9: CTA-COM
A group of segments giving contact details of the
specific person or department within the party identified
in the NAD segment.
0390 CTA, Contact information
A segment to identify a person or department, and
their function, to whom communications should be
directed.
0400 COM, Communication contact
A segment to identify a communication type and number
for the contact specified in the CTA segment.
0410 Segment group 10: TEM-MEA-DTM-SG11
A group of segments to provide details of the test methods,
employed including any circumstances, test devices,
references and dates.
0420 TEM, Test method
A segment to describe the nature of the test performed.
0430 MEA, Measurements
A segment to provide the necessary values of the various
circumstances related to the tests, e.g. temperature
reading when test performed.
0440 DTM, Date/time/period
A segment specifying the date, and when relevant, the
time of an activity identified by the date/time
qualifier, e.g. test date/time.
0450 Segment group 11: RFF-DTM
A segment group of referencing documents relating to the
test method and where necessary, their dates, e.g. device
number.
0460 RFF, Reference
A segment identifying the referenced document by its
number and where appropriate, a line number within
that document.
0470 DTM, Date/time/period
A segment specifying the date/time of the referenced
document.
0480 Segment group 12: CCI-PSD-SPS-DTM-FTX-SG13-SG14-SG16-SG18
A group of segments to be used to define a class of
properties, the individual properties within that class and
the related data (e.g. discrete values, statistical
information, test methods). When this segment group is used,
the data is directly related to the product specified.
0490 CCI, Characteristic/class id
To specify the general class and/or the individual
properties on which the Quality Data is being reported.
Note: within the CCI-segment Class type code (7059) or
Measured attribute code (6313) or Characteristic
description code (7037) must be present.
If Class type code (7059) AND Measured attribute code
(6313) are present, then Characteristic description code
(7037) is not allowed.
If only Class type code is used within the CCI-segment,
then the individual properties must be specified within
the related STA/MEA-segments.
The data element Characteristic description (7036) should
only be used to enhance the meaning of the code value
(e.g. if no specific code available and code value ZZ
(mutually defined) is used then Description can be used
to further describe the Product Characteristics.
NB: The Class identification element in this segment is
only used to specify the product characteristic class,
e.g. Chemistry or Physical Dimensions.
0500 PSD, Physical sample description
A segment to define the physical sample parameters
associated with a test resulting in discrete
measurements. If used in this position, the values only
apply to data within the same analysis group.
0510 SPS, Sampling parameters for summary statistics
A segment to define the sampling parameters associated
with summary statistics reported. If used in this
position, the values only apply to data within the same
analysis group.
0520 DTM, Date/time/period
A segment specifying the date, and when relevant, the
time of an activity identified by the date/time
qualifier, e.g. date/time, test performed.
0530 FTX, Free text
A segment with free text information to give further
clarification within Segment group 12: the Analysis
Group.
0540 Segment group 13: RFF-DTM
A segment group of referencing documents relating to the
Analysis Section and where necessary, their dates, e.g.
Purchase order, shipment note.
0550 RFF, Reference
A segment identifying the referenced document by its
number and where appropriate, a line number within
that document.
0560 DTM, Date/time/period
A segment specifying the date/time of the referenced
document.
0570 Segment group 14: MEA-DTM-SG15
A group of segments to allow measurement values or
specification values to be specified along with their
associated references and dates. The data element
Measurement purpose code qualifier (6311) indicates the
type of the values.
0580 MEA, Measurements
A segment to specify discrete values, other
measurement results or specification values. These
values may be specified as a range and may be
qualified by the significance and/or the attribute
codes.
0590 DTM, Date/time/period
A segment specifying the date, and when relevant, the
time of an activity identified by the date/time
qualifier, e.g. test date/time.
0600 Segment group 15: RFF-DTM
A Segment group of referencing documents relating to
the specifications and values and where necessary,
their dates.
0610 RFF, Reference
A segment identifying the referenced document by
its number and where appropriate, a line number
within that document.
0620 DTM, Date/time/period
A segment specifying the date/time of the
referenced document.
0630 Segment group 16: STA-DTM-SG17
A group of segments to provide the necessary information
for summary statistics with any related references and
dates.
0640 STA, Statistics
A segment to specify the values required for
statistics including codes to define the type of
statistics and the measure unit employed.
0650 DTM, Date/time/period
A segment specifying the date, and when relevant, the
time of an activity identified by the date/time
qualifier, e.g. time frame of statistical period.
0660 Segment group 17: RFF-DTM
A Segment group of referencing documents relating to
the statistics and where necessary, their dates.
0670 RFF, Reference
A segment identifying the referenced document by
its number and where appropriate, a line number
within that document.
0680 DTM, Date/time/period
A segment specifying the date/time of the
referenced document.
0690 Segment group 18: TEM-MEA-DTM-SG19
A group of segments to provide details of the test
methods, employed including any circumstances, test
devices, references and dates.
0700 TEM, Test method
A segment to describe the nature of the test
performed.
0710 MEA, Measurements
A segment to provide the necessary values of the
various circumstances related to the tests, e.g.
temperature reading when test performed.
0720 DTM, Date/time/period
A segment specifying the date, and when relevant, the
time of an activity identified by the date/time
qualifier.
0730 Segment group 19: RFF-DTM
A Segment group of referencing documents relating to
the test method and where necessary, their dates.
0740 RFF, Reference
A segment identifying the referenced document by
its number and where appropriate, a line number
within that document.
0750 DTM, Date/time/period
A segment specifying the date/time of the
referenced document.
0760 Segment group 20: GIN-DTM-SG21-SG22
A group of segments to enable batch related information to
be specified.
0770 GIN, Goods identity number
A segment providing specific serial or batch numbers,
relating to the specified product. These may be single
numbers or ranges of numbers.
0780 DTM, Date/time/period
A segment specifying the date, and when relevant, the
time of an activity identified by the date/time
qualifier, e.g. batch process date.
0790 Segment group 21: RFF-DTM
A Segment group of referencing documents relating to the
batch and where necessary, their dates.
0800 RFF, Reference
A segment identifying the referenced document by its
number and where appropriate, a line number within
that document.
0810 DTM, Date/time/period
A segment specifying the date/time of the referenced
document.
0820 Segment group 22: CCI-PSD-SPS-DTM-FTX-SG23-SG24-SG26-SG28
A group of segments to be used to define a class of
properties, the individual properties within that class
and the related data (e.g. discrete values, statistical
information, test methods). When this segment group is
used, the data is directly related to the product
specified.
0830 CCI, Characteristic/class id
To specify the general class and/or the individual
properties on which the Quality Data is being
reported. Note: within the CCI-segment Class type code
(7059) or Measured attribute code (6313) or
Characteristic description code (7037) must be
present.
If Class type code (7059) AND Measured attribute code
(6313) are present, then Characteristic description
code (7037) is not allowed.
If only Class type code is used within the CCI-
segment, then the individual properties must be
specified within the related STA/MEA-segments.
The data element Characteristic description (7036)
should only be used to enhance the meaning of the code
value (e.g. if no specific code available and code
value ZZ (mutually defined) is used then Description
can be used to further describe the Product
Characteristics.
NB: The Class identification element in this segment
is only used to specify the product characteristic
class, e.g. Chemistry or Physical Dimensions.
0840 PSD, Physical sample description
A segment to define the physical sample parameters
associated with a test resulting in discrete
measurements. If used in this position, the values
only apply to data within the same analysis group.
0850 SPS, Sampling parameters for summary statistics
A segment to define the sampling parameters associated
with summary statistics reported. If used in this
position, the values only apply to data within the
same analysis group.
0860 DTM, Date/time/period
A segment specifying the date, and when relevant, the
time of an activity identified by the date/time
qualifier, e.g. date/time, test performed.
0870 FTX, Free text
A segment with free text information to give further
clarification within Segment group 22: the Analysis
Group.
0880 Segment group 23: RFF-DTM
A segment group of referencing documents relating to
the Analysis section and where necessary, their dates,
e.g. Purchase order, shipment note.
0890 RFF, Reference
A segment identifying the referenced document by
its number and where appropriate, a line number
within that document.
0900 DTM, Date/time/period
A segment specifying the date/time of the
referenced document.
0910 Segment group 24: MEA-DTM-SG25
A group of segments to allow measurement values or
specification values to be specified along with their
associated references and dates. The data element
Measurement purpose code qualifier (6311) indicates
the type of the values.
0920 MEA, Measurements
A segment to specify discrete values, other
measurement results or specification values. These
values may be specified as a range and may be
qualified by the significance and/or the attribute
codes.
0930 DTM, Date/time/period
A segment specifying the date, and when relevant,
the time of an activity identified by the date/time
qualifier, e.g. test date/time.
0940 Segment group 25: RFF-DTM
A Segment group of referencing documents relating
to the specifications and values and where
necessary, their dates.
0950 RFF, Reference
A segment identifying the referenced document by
its number and where appropriate, a line number
within that document.
0960 DTM, Date/time/period
A segment specifying the date/time of the
referenced document.
0970 Segment group 26: STA-DTM-SG27
A group of segments to provide the necessary
information for summary statistics with any related
references and dates.
0980 STA, Statistics
A segment to specify the values required for
statistics including codes to define the type of
statistics and the measure unit employed.
0990 DTM, Date/time/period
A segment specifying the date, and when relevant,
the time of an activity identified by the date/time
qualifier, e.g. time frame of statistical period.
1000 Segment group 27: RFF-DTM
A Segment group of referencing documents relating
to the statistics and where necessary, their dates.
1010 RFF, Reference
A segment identifying the referenced document by
its number and where appropriate, a line number
within that document.
1020 DTM, Date/time/period
A segment specifying the date/time of the
referenced document.
1030 Segment group 28: TEM-MEA-DTM-SG29
A group of segments to provide details of the test
methods, employed including any circumstances, test
devices, references and dates.
1040 TEM, Test method
A segment to describe the nature of the test
performed.
1050 MEA, Measurements
A segment to provide the necessary values of the
various circumstances related to the tests, e.g.
temperature reading when test performed.
1060 DTM, Date/time/period
A segment specifying the date, and when relevant,
the time of an activity identified by the date/time
qualifier.
1070 Segment group 29: RFF-DTM
A Segment group of referencing documents relating
to the test method and where necessary, their
dates.
1080 RFF, Reference
A segment identifying the referenced document by
its number and where appropriate, a line number
within that document.
1090 DTM, Date/time/period
A segment specifying the date/time of the
referenced document.
1100 Segment group 30: PRC-SG31-SG32
A group of segments to allow process related quality data to
be specified.
1110 PRC, Process identification
A segment to specify the process/sub-process type and
description to which the data is related.
1120 Segment group 31: NAD-LOC
A group of segments identifying Names, Addresses and
Locations relevant to the process.
1130 NAD, Name and address
A segment identifying names and addresses of parties,
in coded or clear form, and their function relevant
for the process.
1140 LOC, Place/location identification
A segment indicating more details regarding specific
locations related to the party specified in the NAD-
segment, e.g. internal site/building number.
1150 Segment group 32: CCI-PSD-SPS-DTM-FTX-SG33-SG34-SG36-SG38
A group of segments to be used to define a class of
properties, the individual properties within that class
and the related data (e.g. discrete values, statistical
information, test methods). When this segment group is
used, the data is directly related to the product
specified.
1160 CCI, Characteristic/class id
To specify the general class and/or the individual
properties on which the Quality Data is being
reported. Note: within the CCI-segment Class type code
(7059) or Measured attribute code (6313) or
Characteristic description code (7037) must be
present.
If Class type code (7059) AND Measured attribute code
(6313) are present, then Characteristic description
code (7037) is not allowed.
If only Class type code is used within the CCI-
segment, then the individual properties must be
specified within the related STA/MEA-segments.
The data element Characteristic description (7036)
should only be used to enhance the meaning of the code
value (e.g. if no specific code available and code
value ZZ (mutually defined) is used then Description
can be used to further describe the Product
Characteristics.
NB: The Class identification element in this segment
is only used to specify the product characteristic
class, e.g. Chemistry or Physical Dimensions.
1170 PSD, Physical sample description
A segment to define the physical sample parameters
associated with a test resulting in discrete
measurements. If used in this position, the values
only apply to data within the same analysis group.
1180 SPS, Sampling parameters for summary statistics
A segment to define the sampling parameters associated
with summary statistics reported. If used in this
position, the values only apply to data within the
same analysis group.
1190 DTM, Date/time/period
A segment specifying the date, and when relevant, the
time of an activity identified by the date/time
qualifier, e.g. date/time, test performed.
1200 FTX, Free text
A segment with free text information to give further
clarification within Segment group 32: the Analysis
Group.
1210 Segment group 33: RFF-DTM
A segment group of referencing documents relating to
the Analysis Section and where necessary, their dates,
e.g. Purchase order, shipment note.
1220 RFF, Reference
A segment identifying the referenced document by
its number and where appropriate, a line number
within that document.
1230 DTM, Date/time/period
A segment specifying the date/time of the
referenced document.
1240 Segment group 34: MEA-DTM-SG35
A group of segments to allow measurement values or
specification values to be specified along with their
associated references and dates. The data element
Measurement purpose code qualifier (6311) indicates
the type of the values.
1250 MEA, Measurements
A segment to specify discrete values, other
measurement results or specification values. These
values may be specified as a range and may be
qualified by the significance and/or the attribute
codes.
1260 DTM, Date/time/period
A segment specifying the date, and when relevant,
the time of an activity identified by the date/time
qualifier, e.g. test date/time.
1270 Segment group 35: RFF-DTM
A Segment group of referencing documents relating
to the specifications and values and where
necessary, their dates.
1280 RFF, Reference
A segment identifying the referenced document by
its number and where appropriate, a line number
within that document.
1290 DTM, Date/time/period
A segment specifying the date/time of the
referenced document.
1300 Segment group 36: STA-DTM-SG37
A group of segments to provide the necessary
information for summary statistics with any related
references and dates.
1310 STA, Statistics
A segment to specify the values required for
statistics including codes to define the type of
statistics and the measure unit employed.
1320 DTM, Date/time/period
A segment specifying the date, and when relevant,
the time of an activity identified by the date/time
qualifier, e.g. time frame of statistical period.
1330 Segment group 37: RFF-DTM
A Segment group of referencing documents relating
to the statistics and where necessary, their dates.
1340 RFF, Reference
A segment identifying the referenced document by
its number and where appropriate, a line number
within that document.
1350 DTM, Date/time/period
A segment specifying the date/time of the
referenced document.
1360 Segment group 38: TEM-MEA-DTM-SG39
A group of segments to provide details of the test
methods, employed including any circumstances, test
devices, references and dates.
1370 TEM, Test method
A segment to describe the nature of the test
performed.
1380 MEA, Measurements
A segment to provide the necessary values of the
various circumstances related to the tests, e.g.
temperature reading when test performed.
1390 DTM, Date/time/period
A segment specifying the date, and when relevant,
the time of an activity identified by the date/time
qualifier.
1400 Segment group 39: RFF-DTM
A Segment group of referencing documents relating
to the test method and where necessary, their
dates.
1410 RFF, Reference
A segment identifying the referenced document by
its number and where appropriate, a line number
within that document.
1420 DTM, Date/time/period
A segment specifying the date/time of the
referenced document.
1430 UNT, Message trailer
A service segment ending a message, giving the total number of
segments in the message (including the UNH & UNT) and the
control reference number of the message.
4.2 Segment index (alphabetical sequence by tag)
BGM Beginning of message
CCI Characteristic/class id
COM Communication contact
CTA Contact information
DTM Date/time/period
FTX Free text
GIN Goods identity number
IMD Item description
LIN Line item
LOC Place/location identification
MEA Measurements
NAD Name and address
PIA Additional product id
PRC Process identification
PSD Physical sample description
QTY Quantity
RFF Reference
SPS Sampling parameters for summary statistics
STA Statistics
TEM Test method
UNH Message header
UNT Message trailer
4.3 Message structure
4.3.1 Segment table
Pos Tag Name S R
HEADER SECTION
0010 UNH Message header M 1
0020 BGM Beginning of message M 1
0030 DTM Date/time/period M 10
0040 IMD Item description C 10
0050 MEA Measurements C 10
0060 FTX Free text C 5
0070 ----- Segment group 1 ------------------ C 10----------+
0080 RFF Reference M 1 |
0090 DTM Date/time/period C 2-----------+
0100 ----- Segment group 2 ------------------ C 10----------+
0110 NAD Name and address M 1 |
0120 LOC Place/location identification C 5 |
|
0130 ----- Segment group 3 ------------------ C 10---------+|
0140 RFF Reference M 1 ||
0150 DTM Date/time/period C 2----------+|
|
0160 ----- Segment group 4 ------------------ C 5----------+|
0170 CTA Contact information M 1 ||
0180 COM Communication contact C 5----------++
DETAIL SECTION
0190 ----- Segment group 5 ------------------ C 200---------+
0200 LIN Line item M 1 |
0210 PIA Additional product id C 10 |
0220 IMD Item description C 10 |
0230 MEA Measurements C 10 |
0240 PSD Physical sample description C 1 |
0250 SPS Sampling parameters for summary |
statistics C 1 |
0260 DTM Date/time/period C 10 |
0270 QTY Quantity C 99 |
0280 FTX Free text C 5 |
|
0290 ----- Segment group 6 ------------------ C 10---------+|
0300 RFF Reference M 1 ||
0310 DTM Date/time/period C 2----------+|
|
0320 ----- Segment group 7 ------------------ C 10---------+|
0330 NAD Name and address M 1 ||
0340 LOC Place/location identification C 5 ||
||
0350 ----- Segment group 8 ------------------ C 10--------+||
0360 RFF Reference M 1 |||
0370 DTM Date/time/period C 2---------+||
||
0380 ----- Segment group 9 ------------------ C 5---------+||
0390 CTA Contact information M 1 |||
0400 COM Communication contact C 5---------++|
|
0410 ----- Segment group 10 ------------------ C 100--------+|
0420 TEM Test method M 1 ||
0430 MEA Measurements C 100 ||
0440 DTM Date/time/period C 10 ||
||
0450 ----- Segment group 11 ------------------ C 10--------+||
0460 RFF Reference M 1 |||
0470 DTM Date/time/period C 2---------++|
|
0480 ----- Segment group 12 ------------------ C 200--------+|
0490 CCI Characteristic/class id M 1 ||
0500 PSD Physical sample description C 10 ||
0510 SPS Sampling parameters for summary ||
statistics C 10 ||
0520 DTM Date/time/period C 10 ||
0530 FTX Free text C 10 ||
||
0540 ----- Segment group 13 ------------------ C 10--------+||
0550 RFF Reference M 1 |||
0560 DTM Date/time/period C 2---------+||
||
0570 ----- Segment group 14 ------------------ C 999-------+||
0580 MEA Measurements M 1 |||
0590 DTM Date/time/period C 10 |||
|||
0600 ----- Segment group 15 ------------------ C 10-------+|||
0610 RFF Reference M 1 ||||
0620 DTM Date/time/period C 2--------++||
||
0630 ----- Segment group 16 ------------------ C 100-------+||
0640 STA Statistics M 1 |||
0650 DTM Date/time/period C 10 |||
|||
0660 ----- Segment group 17 ------------------ C 10-------+|||
0670 RFF Reference M 1 ||||
0680 DTM Date/time/period C 2--------++||
||
0690 ----- Segment group 18 ------------------ C 100-------+||
0700 TEM Test method M 1 |||
0710 MEA Measurements C 100 |||
0720 DTM Date/time/period C 10 |||
|||
0730 ----- Segment group 19 ------------------ C 10-------+|||
0740 RFF Reference M 1 ||||
0750 DTM Date/time/period C 2--------+++|
|
0760 ----- Segment group 20 ------------------ C 100--------+|
0770 GIN Goods identity number M 1 ||
0780 DTM Date/time/period C 10 ||
||
0790 ----- Segment group 21 ------------------ C 10--------+||
0800 RFF Reference M 1 |||
0810 DTM Date/time/period C 2---------+||
||
0820 ----- Segment group 22 ------------------ C 200-------+||
0830 CCI Characteristic/class id M 1 |||
0840 PSD Physical sample description C 10 |||
0850 SPS Sampling parameters for summary |||
statistics C 10 |||
0860 DTM Date/time/period C 10 |||
0870 FTX Free text C 10 |||
|||
0880 ----- Segment group 23 ------------------ C 10-------+|||
0890 RFF Reference M 1 ||||
0900 DTM Date/time/period C 2--------+|||
|||
0910 ----- Segment group 24 ------------------ C 999------+|||
0920 MEA Measurements M 1 ||||
0930 DTM Date/time/period C 10 ||||
||||
0940 ----- Segment group 25 ------------------ C 10------+||||
0950 RFF Reference M 1 |||||
0960 DTM Date/time/period C 2-------++|||
|||
0970 ----- Segment group 26 ------------------ C 100------+|||
0980 STA Statistics M 1 ||||
0990 DTM Date/time/period C 10 ||||
||||
1000 ----- Segment group 27 ------------------ C 10------+||||
1010 RFF Reference M 1 |||||
1020 DTM Date/time/period C 2-------++|||
|||
1030 ----- Segment group 28 ------------------ C 100------+|||
1040 TEM Test method M 1 ||||
1050 MEA Measurements C 100 ||||
1060 DTM Date/time/period C 10 ||||
||||
1070 ----- Segment group 29 ------------------ C 10------+||||
1080 RFF Reference M 1 |||||
1090 DTM Date/time/period C 2-------++++|
|
1100 ----- Segment group 30 ------------------ C 100--------+|
1110 PRC Process identification M 1 ||
||
1120 ----- Segment group 31 ------------------ C 10--------+||
1130 NAD Name and address M 1 |||
1140 LOC Place/location identification C 5---------+||
||
1150 ----- Segment group 32 ------------------ C 200-------+||
1160 CCI Characteristic/class id M 1 |||
1170 PSD Physical sample description C 10 |||
1180 SPS Sampling parameters for summary |||
statistics C 10 |||
1190 DTM Date/time/period C 10 |||
1200 FTX Free text C 10 |||
|||
1210 ----- Segment group 33 ------------------ C 10-------+|||
1220 RFF Reference M 1 ||||
1230 DTM Date/time/period C 2--------+|||
|||
1240 ----- Segment group 34 ------------------ C 999------+|||
1250 MEA Measurements M 1 ||||
1260 DTM Date/time/period C 10 ||||
||||
1270 ----- Segment group 35 ------------------ C 10------+||||
1280 RFF Reference M 1 |||||
1290 DTM Date/time/period C 2-------++|||
|||
1300 ----- Segment group 36 ------------------ C 100------+|||
1310 STA Statistics M 1 ||||
1320 DTM Date/time/period C 10 ||||
||||
1330 ----- Segment group 37 ------------------ C 10------+||||
1340 RFF Reference M 1 |||||
1350 DTM Date/time/period C 2-------++|||
|||
1360 ----- Segment group 38 ------------------ C 100------+|||
1370 TEM Test method M 1 ||||
1380 MEA Measurements C 100 ||||
1390 DTM Date/time/period C 10 ||||
||||
1400 ----- Segment group 39 ------------------ C 10------+||||
1410 RFF Reference M 1 |||||
1420 DTM Date/time/period C 2-------+++++
1430 UNT Message trailer M 1
Copyright United Nations, all rights reserved
UN Economic Commission for Europe
Palais des Nations, CH-1211 Geneva 10, Switzerland
Tel: +41-22 917 2016 Fax: +41-22 917 0037 E-mail: TradeMaster@unece.org
UN/EDIFACT Directories