United Nations Directories for Electronic Data Interchange for
Administration, Commerce and Transport
UN/EDIFACT
United Nations Directories for Electronic Data Interchange for |
Message Type : REPREM
Version : D
Release : 01C
Contr. Agency: UN
Revision : 1
Date : 2001-11-07
SOURCE: D9 Insurance (SWG)
CONTENTS
Reinsurance premium message
0. INTRODUCTION
1. SCOPE
1.1 Functional definition
1.2 Field of application
1.3 Principles
2. REFERENCES
3. TERMS AND DEFINITIONS
3.1 Standard terms and definitions
4. MESSAGE DEFINITION
4.1 Segment clarification
4.2 Segment index (alphabetical sequence by tag)
4.3 Message structure
4.3.1 Segment table
----------------------------------------------------------------------
For general information on UN standard message types see UN Trade Data
Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM
General Introduction
----------------------------------------------------------------------
0. INTRODUCTION
This specification provides the definition of the Reinsurance
premium message (REPREM) to be used in Electronic Data
Interchange (EDI) between trading partners involved in
administration, commerce and transport.
1. SCOPE
1.1 Functional definition
The Reinsurance Premium Message (REPREM) allows to support the
technical entries for any premium or brokerage adjustment
amount. For this purpose, it enables to render all the relevant
data (mainly amounts and the way they are built up) used in the
actual calculation of the adjustment, as well as the other
relevant elements used in the specific formula.
1.2 Field of application
The Reinsurance premium message may be used for both national
and international applications. It is based on universal
practice related to administration, commerce and transport, and
is not dependent on the type of business or industry.
1.3 Principles
A reinsurance technical account (catered for in the RETACC
message) is only acceptable by the receiver if certain figures
are supported by specific calculations, in which the sender
explains how he arrived at these figures. This message caters
for 3 of these specific calculations, i.e. premium adjustment
(flat or retrospective - considering the past loss history for
the contract), reinstatement premium (which is an additional
premium to be paid by the reinsured in order to reinstate the
cover granted by the reinsurer) and brokerage adjustment
(triggered by a premium adjustment).
2. REFERENCES
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General
Introduction, Section 1.
3. TERMS AND DEFINITIONS
3.1 Standard terms and definitions
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General
Introduction, Section 2.
4. MESSAGE DEFINITION
4.1 Segment clarification
This section should be read in conjunction with the segment
table which indicates mandatory, conditional and repeating
requirements.
0010 UNH, Message header
A service segment starting and uniquely identifying a message.
The message type code for the Reinsurance premium message is
REPREM.
Note: Reinsurance premium messages conforming to this document
must contain the following data in segment UNH, composite S009:
Data element 0065 REPREM
0052 D
0054 01C
0051 UN
0020 X GIS, General indicator
A segment to give processing indicators relating to the whole
message.
0030 Segment group 1: NAD-CTA-COM-RFF
A group or segments to specify relevant parties for the whole
transaction.
0040 NAD, Name and address
A segment to specify the name and address and the related
function of the party involved.
0050 CTA, Contact information
A segment to identify a person or a department to whom
communication should be directed.
0060 COM, Communication contact
A segment to identify a communication number of a
department, or a person to whom communication should be
directed.
0070 RFF, Reference
A segment to specify the reference of the party identified
in the leading NAD segment.
0080 DTM, Date/time/period
A segment to specify pertinent dates, times and periods
relating to the whole message.
0090 FTX, Free text
A segment to provide descriptive information regarding the
message, the reinsurance contract or the underlying contract.
0100 Segment group 2: REL-RFF-GIS-CUX-DTM-QTY-LOC-PCD-FTX-SG3
A group of segments to identify the sections for which data
rendered, or to specify that data are reported at total
contract level, or to give the formula used at this level as
well as its relevant components.
0110 REL, Relationship
A segment to identify the direct relationship between the
data contained in the segments of group 2.
0120 RFF, Reference
A segment to identify the section for which data are
rendered, or to indicate the reinstatement number where
various reinstatement conditions are stated in the contract.
0130 X GIS, General indicator
A segment to specify indicators relating to the section.
0140 CUX, Currencies
A segment to specify the currency in which the amounts of
the MOA segment triggering group 4 will be expressed and
used for calculation purposes.
0150 DTM, Date/time/period
A segment to specify relevant years or periods, if data can
be grouped under this criterion.
0160 QTY, Quantity
A segment to allow the identification of any figure used in
the calculation.
0170 LOC, Place/location identification
A segment to identify the geographical scope to which the
section data pertains.
0180 PCD, Percentage details
A segment to allow the identification of percentages used in
the calculation.
0190 FTX, Free text
A segment to specify non-standard section information.
0200 Segment group 3: ARD-SG4
A group of segments used to group the amounts relating to
the premium, loss or result breakdown.
0210 ARD, Monetary amount function
A segment to report amounts by their function.
0220 Segment group 4: MOA-GIS-PCD-FTX-DTM-SG5-SG6
A group of segments to report the amounts and additional
information for these amounts.
0230 MOA, Monetary amount
A segment to specify amounts that are used in the
calculation.
0240 X GIS, General indicator
A segment to specify indicators which define the
method of processing the related amount.
0250 PCD, Percentage details
A segment to specify the rate used for the calculation
of the amount in the leading MOA segment, or to
express the order percentage or the receiver's share
percentage, or to specify the reapportionment
percentage that the amount represents in the aggregate
total of all amounts of the same type.
0260 FTX, Free text
A segment to give the loss name or more information
about the amount given in the leading MOA segment.
0270 DTM, Date/time/period
A segment to specify date, time or period relating to
the amount given in the leading MOA segment.
0280 Segment group 5: RFF-DTM-COM-FTX
A group of segments to allow references and, if
required, the type of communication and date of an
associated message to be given.
0290 RFF, Reference
A segment to specify references of the associated
message or document.
0300 DTM, Date/time/period
A segment to give relevant date, time or period
indications relating to the supported or supporting
message or document.
0310 COM, Communication contact
A segment to specify the means by which the
supported message or document has been, or will be
transmitted.
0320 FTX, Free text
A segment to provide free text information
regarding the document or message that is
referenced.
0330 Segment group 6: CUX-MOA-AJT
A group of segments to report the amounts in the
original currency when applicable, and the exchange
rate used.
0340 CUX, Currencies
A segment to specify the original currency and
exchange rate used to convert the original amount
(possibly given in the underneath MOA segment) into
the one given in the leading MOA segment.
0350 MOA, Monetary amount
A segment to report the relevant monetary amount in
the original currency.
0360 AJT, Adjustment details
A segment to identify the reason for an adjustment.
0370 UNT, Message trailer
A service segment ending a message, giving the total number of
segments in the message (including the UNH & UNT) and the
control reference number of the message.
4.2 Segment index (alphabetical sequence by tag)
AJT Adjustment details
ARD Monetary amount function
COM Communication contact
CTA Contact information
CUX Currencies
DTM Date/time/period
FTX Free text
X GIS General indicator
LOC Place/location identification
MOA Monetary amount
NAD Name and address
PCD Percentage details
QTY Quantity
REL Relationship
RFF Reference
UNH Message header
UNT Message trailer
4.3 Message structure
4.3.1 Segment table
Pos Tag Name S R
0010 UNH Message header M 1
0020 X GIS General indicator M 5
0030 ----- Segment group 1 ------------------ M 9-----------+
0040 NAD Name and address M 1 |
0050 CTA Contact information C 1 |
0060 COM Communication contact C 5 |
0070 RFF Reference C 9-----------+
0080 DTM Date/time/period M 9
0090 FTX Free text C 3
0100 ----- Segment group 2 ------------------ M 99----------+
0110 REL Relationship M 1 |
0120 RFF Reference C 9 |
0130 X GIS General indicator C 5 |
0140 CUX Currencies M 1 |
0150 DTM Date/time/period C 9 |
0160 QTY Quantity C 9 |
0170 LOC Place/location identification C 1 |
0180 PCD Percentage details C 9 |
0190 FTX Free text C 3 |
|
0200 ----- Segment group 3 ------------------ M 9----------+|
0210 ARD Monetary amount function M 1 ||
||
0220 ----- Segment group 4 ------------------ M 99--------+||
0230 MOA Monetary amount M 1 |||
0240 X GIS General indicator C 9 |||
0250 PCD Percentage details C 9 |||
0260 FTX Free text C 2 |||
0270 DTM Date/time/period C 9 |||
|||
0280 ----- Segment group 5 ------------------ C 9--------+|||
0290 RFF Reference M 1 ||||
0300 DTM Date/time/period C 2 ||||
0310 COM Communication contact C 1 ||||
0320 FTX Free text C 1--------+|||
|||
0330 ----- Segment group 6 ------------------ C 1--------+|||
0340 CUX Currencies M 1 ||||
0350 MOA Monetary amount C 1 ||||
0360 AJT Adjustment details M 1--------++++
0370 UNT Message trailer M 1
Copyright United Nations, all rights reserved
UN Economic Commission for Europe
Palais des Nations, CH-1211 Geneva 10, Switzerland
Tel: +41-22 917 2016 Fax: +41-22 917 0037 E-mail: TradeMaster@unece.org
UN/EDIFACT Directories