United Nations Directories
for Electronic Data Interchange for
Administration, Commerce and Transport



 UN/EDIFACT

Message Type : COHAOR Version : D Release : 05B Contr. Agency: UN Revision : 9 Date : 2006-01-17 SOURCE: TBG3 Transport CONTENTS Container special handling order message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table ---------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction ---------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Container special handling order message (COHAOR) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE 1.1 Functional definition Order to perform a specified special handling and/or service on containers. This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'. 1.2 Field of application The Container special handling order message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles Business area: Pre- and on-carriage transport of containers/equipment Sending functions include: Shipping agent, Logistic center, Freight forwarder Receiving functions include: Container terminal, Container depot, Inland terminal, Container freight station In the context of the 'Guide to the scenario of EDIFACT container messages' (as referred to at the start of section 1) the following guidelines, rules and functionality apply to this Container special handling order message: * The message contents can be uniquely identified by a combination of the following data elements: - message sender (NAD) - ordering customer (NAD) - work order reference (RFF) * A combination of the following data elements can be used in order to relate to business data contained in other container- related messages: container prefix and number (EQD) * In one message special handling orders for several containers can be specified. * The ultimate execution date and time of the special handling order can be included. * For each container the sea-going vessel, sea voyage number can be given. * The special handling orders are to be coded, completed with comments, if any. The transport sub-working group (D4) has developed recommendations for a harmonised implementation of this message through its subgroup ITIGG (International Transport Implementation Guidelines Group). Users implementing the message are strongly advised to apply these recommendations, which may be obtained from the D4 secretariat. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. 0010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Container special handling order message is COHAOR. Note: Container special handling order messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 COHAOR 0052 D 0054 05B 0051 UN 0020 BGM, Beginning of message A segment to indicate the beginning of a message and to transmit identifying number. 0030 DTM, Date/time/period A segment to indicate a date and time applying to the whole message, such as: - ultimate execution date/time 0040 FTX, Free text A segment to specify free form or processable supplementary information, such as: - change information 0050 Segment group 1: RFF-DTM A group of segments containing a reference and constants which apply to the entire message. 0060 RFF, Reference A segment to express a reference which applies to the entire message, such as: - reference to previous message - work order reference number 0070 DTM, Date/time/period A segment to indicate a date and time relating to the reference, such as: - order date/time (work order) 0080 Segment group 2: NAD-SG3 A group of segments to identify a party and related contacts. 0090 NAD, Name and address A segment to identify the party's name, address, and function, such as: - message recipient - message sender - ordering customer (if different from message sender) 0100 Segment group 3: CTA-COM A group of segments to identify a contact and its communications related to the party. 0110 CTA, Contact information A segment to identify a person or department for the party, such as: - information contact 0120 COM, Communication contact A segment to identify a communication number of a person or department to whom communication should be directed. 0130 Segment group 4: EQD-RFF-DTM-LOC-FTX-GOR-HAN-MEA-PCD-SG5-SG7- SG9-SG11 A group of segments to specify containers in which goods are transported. 0140 EQD, Equipment details A segment to specify container prefix and number. 0150 RFF, Reference A segment to provide a reference specific to the equipment, such as: - inspection number 0160 DTM, Date/time/period A segment to provide a date and time relating to the equipment, such as: - inspection date/time - release date/time 0170 LOC, Place/location identification A segment to provide a location relating to the equipment, such as: - place of inspection 0180 FTX, Free text A segment to specify processable supplementary information associated with the container, such as: - description work item equipment (on terminal, depot or freight station) 0190 GOR, Governmental requirements A segment to specify a governmental requirement relating to the equipment, such as: - government procedure to be conducted 0200 HAN, Handling instructions A segment to specify a handling instruction relating to the equipment, such as: - put aside for cleaning - put aside for Customs examination 0210 MEA, Measurements A segment to specify measurements related to the equipment. 0220 PCD, Percentage details A segment to specify percentages related to the equipment such as percentage humidity. 0230 Segment group 5: TDT-DTM-RFF-SG6 A group of segments to specify related transport details for the equipment. 0240 TDT, Transport information A segment to specify main carriage transport details. 0250 DTM, Date/time/period A segment to specify a date and time related to transport details such as arrival and departure date and time. 0260 RFF, Reference A segment to provide a reference for the liner service, such as: - conference - marketing organization - syndicate - vessel sharing agreement. 0270 Segment group 6: LOC-DTM A group of segments to specify locations associated with the transport details. 0280 LOC, Place/location identification A segment to specify a location associated with the transport details, such as: - place of departure - place of arrival 0290 DTM, Date/time/period A segment to specify date(s) and time(s) related to a location. 0300 Segment group 7: NAD-SG8 A group of segments to identify different parties/places related to the equipment. 0310 NAD, Name and address A segment to specify a related address or party. 0320 Segment group 8: CTA-COM A segment group to specify contact information. 0330 CTA, Contact information A segment to identify a person or department to be contacted. 0340 COM, Communication contact A segment to specify communication details of the contact specified in the CTA segment. 0350 Segment group 9: DGS-FTX-MEA-SG10 A segment group to identify dangerous goods. 0360 DGS, Dangerous goods A segment to specify dangerous goods. 0370 FTX, Free text A segment to specify supplementary details regarding the dangerous goods such as the technical name of the dangerous goods etc. 0380 MEA, Measurements A segment to specify measurements of the dangerous goods, such as: - net net weight. 0390 Segment group 10: CTA-COM A segment group to specify contact information including communication details regarding the dangerous goods. 0400 CTA, Contact information A segment to identify a person or department to be contacted regarding the dangerous goods. 0410 COM, Communication contact A segment to specify communication details of the contact specified in the CTA segment. 0420 Segment group 11: TMP-RNG A segment group to identify transport related temperature settings. 0430 TMP, Temperature A segment to specify the type of transport related temperature such as storage, transport or operating temperature and also to optionally specify a single value temperature setting. 0440 RNG, Range details A segment to optionally specify the transport related temperature as a range of values. 0450 CNT, Control total A segment to specify the number of containers in the message, explicitly given by the sender. 0460 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) BGM Beginning of message CNT Control total COM Communication contact CTA Contact information DGS Dangerous goods DTM Date/time/period EQD Equipment details FTX Free text GOR Governmental requirements HAN Handling instructions LOC Place/location identification MEA Measurements NAD Name and address PCD Percentage details RFF Reference RNG Range details TDT Transport information TMP Temperature UNH Message header UNT Message trailer

4.3 Message structure 4.3.1 Segment table Pos Tag Name S R 0010 UNH Message header M 1 0020 BGM Beginning of message M 1 0030 DTM Date/time/period C 9 0040 FTX Free text C 9 0050 ----- Segment group 1 ------------------ C 9-----------+ 0060 RFF Reference M 1 | 0070 DTM Date/time/period C 9-----------+ 0080 ----- Segment group 2 ------------------ M 9-----------+ 0090 NAD Name and address M 1 | | 0100 ----- Segment group 3 ------------------ C 9----------+| 0110 CTA Contact information M 1 || 0120 COM Communication contact C 9----------++ 0130 ----- Segment group 4 ------------------ M 9999--------+ 0140 EQD Equipment details M 1 | 0150 RFF Reference C 9 | 0160 DTM Date/time/period C 9 | 0170 LOC Place/location identification C 9 | 0180 FTX Free text C 9 | 0190 GOR Governmental requirements C 9 | 0200 HAN Handling instructions C 9 | 0210 MEA Measurements C 9 | 0220 PCD Percentage details C 9 | | 0230 ----- Segment group 5 ------------------ C 9----------+| 0240 TDT Transport information M 1 || 0250 DTM Date/time/period C 9 || 0260 RFF Reference C 9 || || 0270 ----- Segment group 6 ------------------ C 9---------+|| 0280 LOC Place/location identification M 1 ||| 0290 DTM Date/time/period C 9---------++| | 0300 ----- Segment group 7 ------------------ C 9----------+| 0310 NAD Name and address M 1 || || 0320 ----- Segment group 8 ------------------ C 9---------+|| 0330 CTA Contact information M 1 ||| 0340 COM Communication contact C 9---------++| | 0350 ----- Segment group 9 ------------------ C 99---------+| 0360 DGS Dangerous goods M 1 || 0370 FTX Free text C 9 || 0380 MEA Measurements C 9 || || 0390 ----- Segment group 10 ------------------ C 9---------+|| 0400 CTA Contact information M 1 ||| 0410 COM Communication contact C 9---------++| | 0420 ----- Segment group 11 ------------------ C 9----------+| 0430 TMP Temperature M 1 || 0440 RNG Range details C 1----------++ 0450 CNT Control total C 1 0460 UNT Message trailer M 1

Copyright United Nations, all rights reserved
 
UN Economic Commission for Europe
Palais des Nations, CH-1211 Geneva 10, Switzerland
Tel: +41-22 917 2773 Fax: +41-22 917 0037 E-mail: TradeMaster@unece.org
 
UN/EDIFACT Directories