United Nations Directories for Electronic Data Interchange for Administration, Commerce and Transport UN/EDIFACT |
Message Type : IFTMBP Version : D Release : 05B Contr. Agency: UN Revision : 8 Date : 2006-01-17 SOURCE: TBG3 Transport CONTENTS Provisional booking message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 3.2 Message terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table ---------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction ---------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Provisional booking message (IFTMBP) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE This paper provides the definition of the Provisional Booking Message to be used in fulfilling the requirements of trading partners in the transport chain worldwide, in the interchange of cargo and transport related information using Electronic Data Interchange (EDI). This message is a single consignment based message, being aligned with other single consignment based messages such as the other two booking messages (IFTMBF and IFTMBC), the instruction messages (IFTMIN and IFTMCS) and the Arrival Notice Message (IFTMAN). The single consignment based messages can be used by all modes of transport for the forwarding and transport of goods from any origin to any destination, regardless of route or prevailing commercial practice. These messages are suitable for the arrangement of the transport of goods between all parties to the movement of the consignment (including the consignor/shipper and consignee as well as the forwarders, brokers, and carriers involved) as well as providing the information necessary to perform that transport and delivery of the goods. They should be used in the same way by each mode of transport when the requirements are common even if functionally similar information is known by different names. 1.1 Functional definition A message from a party requesting space and/or giving brief details of a planned consignment for forwarding and/or transport services to the party providing those services. In this message, the conditions under which the planned transport should take place can be given. 1.2 Field of application The Provisional booking message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles A provisional booking should always be answered by a confirmation in any form by the service provider. Under normal circumstances a Provisional Booking Message is a first contact message between a shipper and a carrier, either followed by a Firm Booking Message and/or an Instruction Message. - A consignment may contain several goods items. - Goods items may or may not be containerized. - A goods item may be transported in one or more containers, and a single container may contain one or more goods items. - One goods item may be related to one or more customs tariff codes. - Goods items related to one customs tariff code may be carried in one or more containers. - Goods items may reflect either the contractual or operational description of the goods. - A party to the movement of the consignment may book or order transport for one or more goods items. - A party to the movement of the consignment may book or issue instructions of transport to be arranged for several goods items by means of one or several of the following messages: IFTMBP, IFTMBF, IFTMBC, IFTMIN, IFTMCS, IFTMAN. - Pre-carriage (advanced haulage) and/or on-carriage (destination haulage) of goods items or equipment within one booking or instruction may take place in different steps, each step specified with its own transport details group. - Equipment may have other types of equipment attached to it, e.g. a temperature control unit attached to a container. - Equipment and/or goods items may be attached to or transported on another load or transport device, which as such may be attached to or transported on yet another load or transport device, e.g. a container on a chassis on a rail-car. - Transport devices, which have the ability of powered movement on their own, are specified in the transport details group. Other load or transport devices are specified as equipment. - The expression of packaging for goods items can be expressed at up to three levels. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 3.2 Message terms and definitions A number of generic transport terms are used in this specification, to be described as: * MODE OF TRANSPORT: The method of transport used for the conveyance of goods or persons, e.g. by rail, by road, by sea. * MEANS OF TRANSPORT: The vehicle used for the transport of goods or persons, e.g. aircraft, truck, vessel. * TYPE OF MEANS OF TRANSPORT: The type of vehicle used in the transport process, e.g. wide body, tank truck, passenger vessel. * EQUIPMENT: Material resources necessary to facilitate the transport and handling of cargo. Transport equipment does under the given circumstances not have the ability to move by its own propulsion (e.g. sea container, trailer, unit load device, pallet). * TYPE OF EQUIPMENT: The type of material used, e.g. 40 feet container, four way pallet, mafi trailer. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. 0010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Provisional booking message is IFTMBP. Note: Provisional booking messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 IFTMBP 0052 D 0054 05B 0051 UN 0020 BGM, Beginning of message A segment to indicate the beginning of a message and to transmit identifying number and type of the message. 0030 CTA, Contact information A segment to identify a person or department to whom communication should be directed. 0040 COM, Communication contact A segment to identify a communication number of a person or department to whom communication should be directed. 0050 DTM, Date/time/period A segment to indicate a date and time applying to the whole message, e.g., date and time of document issue. 0060 TSR, Transport service requirements A segment to identify the contract, conditions of carriage, services, and priority requirements for the transport. 0070 FTX, Free text A segment to specify free form or processable supplementary information, such as status of transport, remarks to be printed on the transport documents (where required), consignment remarks, insurance instructions, etc., or any other additional information. 0080 CNT, Control total A segment to specify totals for a consignment. 0090 GDS, Nature of cargo A segment to describe the nature of cargo. 0100 Segment group 1: LOC-DTM A group of segments to specify locations and related date(s)/time(s) which apply to the entire message, e.g. place of transhipment. 0110 LOC, Place/location identification A segment to identify a location applying to the entire message. 0120 DTM, Date/time/period A segment to indicate date(s) and time(s) relating to the location. 0130 Segment group 2: RFF-DTM A group of segments containing a reference and constants which apply to the entire message. 0140 RFF, Reference A segment to express a reference which applies to the entire message such as: the document/message number that is to be updated by this very message (according to data element 1225 Message function code in segment BGM), booking reference, order number, insurance contract, etc. 0150 DTM, Date/time/period A segment to indicate date and time relating to the reference. 0160 Segment group 3: GOR-FTX-SG4 A group of segments to identify customs and other governmental procedures and required documents. 0170 GOR, Governmental requirements A segment to indicate applicable governmental procedures related to import, export and transport of the goods. 0180 FTX, Free text A segment to provide additional governmental requirements information. 0190 Segment group 4: DOC-DTM A group of segments to specify required documents by government. 0200 DOC, Document/message details A segment to indicate a document required by government. 0210 DTM, Date/time/period A segment to specify the date/time related to the required document. 0220 Segment group 5: TDT-DTM-TSR-SG6-SG7 A group of segments to indicate details of the movement of goods such as mode and means of transport, locations, departure, and arrival date(s) and time(s). 0230 TDT, Transport information A segment to indicate information related to a certain stage of the transport, such as mode, means and carrier. 0240 DTM, Date/time/period A segment to indicate departure/arrival date and time. 0250 TSR, Transport service requirements A segment to identify contract, conditions of carriage, services, priority requirements for this stage of transport. 0260 Segment group 6: LOC-DTM A group of segments to specify a location and date/time related to this leg of transport. 0270 LOC, Place/location identification A segment to indicate a location such as origin, destination, stop off, etc. related to this leg of transport. 0280 DTM, Date/time/period A segment to specify a date/time related to the location, such as arrival date/time of a means of transport at a specific location. 0290 Segment group 7: RFF-DTM A group of segments to specify an additional reference related to the stage of the transport. 0300 RFF, Reference A segment to specify the additional reference. 0310 DTM, Date/time/period A segment to identify date and time relating to the reference. 0320 Segment group 8: NAD-LOC-SG9-SG10-SG11-SG12-SG13 A group of segments to identify a party, related references, locations contacts, required documents, and charges to be paid by the party. 0330 NAD, Name and address A segment to identify the party's name, address, and function. 0340 LOC, Place/location identification A segment to indicate location where a specific function will be performed. 0350 Segment group 9: CTA-COM A group of segments identifying a contact and its communications related to the party. 0360 CTA, Contact information A segment to identify a person or department within a party. 0370 COM, Communication contact A segment to identify a communication number of a person or department to whom communication should be directed. 0380 Segment group 10: DOC-DTM A group of segments to identify required documents. 0390 DOC, Document/message details A segment to identify a document required of, by or for the party. 0400 DTM, Date/time/period A segment to identify date and time relating to the reference. 0410 Segment group 11: RFF-DTM A group of segments to specify a reference related to the party. 0420 RFF, Reference A segment to identify a reference used by a party. 0430 DTM, Date/time/period A segment to indicate date and time relating to the reference. 0440 Segment group 12: CPI-RFF-CUX-LOC-MOA A group of segments to identify the charge and its amount to be paid by the party. 0450 CPI, Charge payment instructions A segment to identify default charge methodology. 0460 RFF, Reference A segment to indicate a reference relating to the CPI segment, such as charge reference number. 0470 CUX, Currencies A segment to indicate payment currency related to the charge methodology. 0480 LOC, Place/location identification A segment to identify the place of charge collection. 0490 MOA, Monetary amount A segment to identify the monetary amount associated with the charges. 0500 Segment group 13: TSR-RFF-LOC-TPL-FTX A group of segments to specify a transport service requirement and its associated details (such as applicable commercial agreement) related to the party. 0510 TSR, Transport service requirements A segment to specify a required service for the transport, such as re-icing. 0520 RFF, Reference A segment to identify a commercial agreement related to the service requirement. 0530 LOC, Place/location identification A segment to indicate the location where the required service must be performed, such as place of re-icing. 0540 TPL, Transport placement A segment to identify the means of transport to which the service requirement applies. 0550 FTX, Free text A segment to provide any additional information related to the service requirement. 0560 Segment group 14: GID-HAN-TMP-RNG-TMD-LOC-FTX-SG15-GDS-SG16- SG17-SG18-SG19-SG20-SG22-SG24 A group of segments to describe the goods items for which transport is undertaken. 0570 GID, Goods item details A segment to identify a goods item for which transport is undertaken. A goods item can be identified by up to three levels of packaging. 0580 HAN, Handling instructions A segment to specify handling instructions relating to the goods item. 0590 TMP, Temperature A segment to specify a temperature setting for a goods item. 0600 RNG, Range details A segment to specify a temperature range setting for a goods item. 0610 TMD, Transport movement details A segment to specify transport movement details for a goods item. 0620 LOC, Place/location identification A segment to specify a country associated with a goods item, such as country of origin, or country of destination. 0630 FTX, Free text A segment to specify processable supplementary information relating to the goods item. 0640 Segment group 15: NAD-DTM A group of segments to identify different places of collection and/or delivery for the goods item. 0650 NAD, Name and address A segment to specify an address of a place of collection or delivery for a goods item. 0660 DTM, Date/time/period A segment to indicate date and time relating to the place of collection or delivery. 0670 GDS, Nature of cargo A segment to describe the nature of cargo. 0680 Segment group 16: MEA-EQN A group of segments to specify measurements applicable to a goods item. 0690 MEA, Measurements A segment to specify measurements, other than dimensions, applicable to a goods item. 0700 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 0710 Segment group 17: DIM-EQN A group of segments to specify dimensions applicable to a goods item. 0720 DIM, Dimensions To specify dimensions applicable to a goods item. 0730 EQN, Number of units A segment to specify the number of equipment units to each of which the given dimension applies. 0740 Segment group 18: RFF-DTM A group of segments to identify references to a goods item. 0750 RFF, Reference A segment to identify a reference to a goods item. 0760 DTM, Date/time/period A segment to indicate date and time relating to the reference. 0770 Segment group 19: DOC-DTM A group of segments to specify documents and associated date(s) and time(s) for a goods item. 0780 DOC, Document/message details A segment to specify a document prepared for a goods item. 0790 DTM, Date/time/period A segment to associate date and time with the prepared document. 0800 Segment group 20: TPL-SG21 A group of segments to identify transport details and associated measurements for a goods item. This group may be repeated to indicate the different phases of the movement. 0810 TPL, Transport placement A segment to identify transport details for a goods item. 0820 Segment group 21: MEA-EQN A group of segments to identify measurements. 0830 MEA, Measurements A segment to specify the distribution of a goods item among the transport details. 0840 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 0850 Segment group 22: SGP-SG23 A group of segments to specify the distribution of a goods item among the transport equipment. 0860 SGP, Split goods placement A segment to identify the equipment in which goods are transported. 0870 Segment group 23: MEA-EQN A group of segments to identify measurements. 0880 MEA, Measurements A segment to specify measurements of that portion of the goods item in the equipment. 0890 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 0900 Segment group 24: DGS-FTX-SG25-SG26-SG27 A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes. 0910 DGS, Dangerous goods A segment to indicate the class of dangerous goods, packing group, etc. 0920 FTX, Free text A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information. 0930 Segment group 25: CTA-COM A group of segments to identify a contact to whom communication regarding the dangerous goods can be directed. 0940 CTA, Contact information A segment to identify a person or department. 0950 COM, Communication contact A segment to identify a communication number of a person or department. 0960 Segment group 26: MEA-EQN A group of segments to identify dangerous goods measurements. 0970 MEA, Measurements A segment to specify measurements of the dangerous goods. 0980 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 0990 Segment group 27: SGP-SG28 A group of segments to specify the distribution of the dangerous goods among the transport equipment. 1000 SGP, Split goods placement A segment to identify the equipment in which the dangerous goods are transported. 1010 Segment group 28: MEA-EQN A group of segments to identify dangerous goods measurements. 1020 MEA, Measurements A segment to specify measurements of that portion of the dangerous goods in the equipment. 1030 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 1040 Segment group 29: EQD-EQN-TMD-MEA-DIM-TPL-HAN-TMP-FTX-RFF-SG30 A group of segments to specify equipment in which goods are transported. 1050 EQD, Equipment details A segment to specify equipment, and equipment size and type used in the transport. 1060 EQN, Number of units A segment to specify number of pieces of equipment required. 1070 TMD, Transport movement details A segment to specify transport movement details for the equipment. 1080 MEA, Measurements A segment to specify measurements, other than dimensions, associated with the equipment, such as weight. 1090 DIM, Dimensions A segment to specify dimensions applicable to equipment. 1100 TPL, Transport placement A segment to identify transport details for the equipment. 1110 HAN, Handling instructions A segment to specify handling instructions for specified equipment. 1120 TMP, Temperature A segment to specify a temperature setting for the equipment. 1130 FTX, Free text A segment to specify processable supplementary information associated with the equipment. 1140 RFF, Reference A segment to specify a reference number to equipment. 1150 Segment group 30: NAD-DTM-SG31 A group of segments to identify different equipment pick-up or drop-off places. 1160 NAD, Name and address A segment to specify a pick-up or drop-off address. 1170 DTM, Date/time/period A segment to indicate date and time relating to pick-up or drop-off. 1180 Segment group 31: CTA-COM A group of segments to identify a contact and its communications related to the party. 1190 CTA, Contact information A segment to specify a contact name associated with a specified equipment positioning or collection address. 1200 COM, Communication contact A segment to specify a communication number related to the contact. 1210 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) BGM Beginning of message CNT Control total COM Communication contact CPI Charge payment instructions CTA Contact information CUX Currencies DGS Dangerous goods DIM Dimensions DOC Document/message details DTM Date/time/period EQD Equipment details EQN Number of units FTX Free text GDS Nature of cargo GID Goods item details GOR Governmental requirements HAN Handling instructions LOC Place/location identification MEA Measurements MOA Monetary amount NAD Name and address RFF Reference RNG Range details SGP Split goods placement TDT Transport information TMD Transport movement details TMP Temperature TPL Transport placement TSR Transport service requirements UNH Message header UNT Message trailer
4.3 Message structure 4.3.1 Segment table Pos Tag Name S R 0010 UNH Message header M 1 0020 BGM Beginning of message M 1 0030 CTA Contact information C 1 0040 COM Communication contact C 9 0050 DTM Date/time/period C 9 0060 TSR Transport service requirements C 9 0070 FTX Free text C 99 0080 CNT Control total C 9 0090 GDS Nature of cargo C 9 0100 ----- Segment group 1 ------------------ C 99----------+ 0110 LOC Place/location identification M 1 | 0120 DTM Date/time/period C 9-----------+ 0130 ----- Segment group 2 ------------------ C 99----------+ 0140 RFF Reference M 1 | 0150 DTM Date/time/period C 9-----------+ 0160 ----- Segment group 3 ------------------ C 9-----------+ 0170 GOR Governmental requirements M 1 | 0180 FTX Free text C 9 | | 0190 ----- Segment group 4 ------------------ C 9----------+| 0200 DOC Document/message details M 1 || 0210 DTM Date/time/period C 1----------++ 0220 ----- Segment group 5 ------------------ M 99----------+ 0230 TDT Transport information M 1 | 0240 DTM Date/time/period C 9 | 0250 TSR Transport service requirements C 9 | | 0260 ----- Segment group 6 ------------------ C 99---------+| 0270 LOC Place/location identification M 1 || 0280 DTM Date/time/period C 9----------+| | 0290 ----- Segment group 7 ------------------ C 9----------+| 0300 RFF Reference M 1 || 0310 DTM Date/time/period C 1----------++ 0320 ----- Segment group 8 ------------------ C 99----------+ 0330 NAD Name and address M 1 | 0340 LOC Place/location identification C 9 | | 0350 ----- Segment group 9 ------------------ C 9----------+| 0360 CTA Contact information M 1 || 0370 COM Communication contact C 9----------+| | 0380 ----- Segment group 10 ------------------ C 9----------+| 0390 DOC Document/message details M 1 || 0400 DTM Date/time/period C 1----------+| | 0410 ----- Segment group 11 ------------------ C 9----------+| 0420 RFF Reference M 1 || 0430 DTM Date/time/period C 9----------+| | 0440 ----- Segment group 12 ------------------ C 9----------+| 0450 CPI Charge payment instructions M 1 || 0460 RFF Reference C 99 || 0470 CUX Currencies C 1 || 0480 LOC Place/location identification C 9 || 0490 MOA Monetary amount C 9----------+| | 0500 ----- Segment group 13 ------------------ C 99---------+| 0510 TSR Transport service requirements M 1 || 0520 RFF Reference C 1 || 0530 LOC Place/location identification C 1 || 0540 TPL Transport placement C 1 || 0550 FTX Free text C 9----------++ 0560 ----- Segment group 14 ------------------ C 999---------+ 0570 GID Goods item details M 1 | 0580 HAN Handling instructions C 1 | 0590 TMP Temperature C 1 | 0600 RNG Range details C 1 | 0610 TMD Transport movement details C 1 | 0620 LOC Place/location identification C 9 | 0630 FTX Free text C 9 | | 0640 ----- Segment group 15 ------------------ C 9----------+| 0650 NAD Name and address M 1 || 0660 DTM Date/time/period C 1----------+| 0670 GDS Nature of cargo C 9 | | 0680 ----- Segment group 16 ------------------ C 99---------+| 0690 MEA Measurements M 1 || 0700 EQN Number of units C 1----------+| | 0710 ----- Segment group 17 ------------------ C 99---------+| 0720 DIM Dimensions M 1 || 0730 EQN Number of units C 1----------+| | 0740 ----- Segment group 18 ------------------ C 9----------+| 0750 RFF Reference M 1 || 0760 DTM Date/time/period C 9----------+| | 0770 ----- Segment group 19 ------------------ C 9----------+| 0780 DOC Document/message details M 1 || 0790 DTM Date/time/period C 9----------+| | 0800 ----- Segment group 20 ------------------ C 9----------+| 0810 TPL Transport placement M 1 || || 0820 ----- Segment group 21 ------------------ C 9---------+|| 0830 MEA Measurements M 1 ||| 0840 EQN Number of units C 1---------++| | 0850 ----- Segment group 22 ------------------ C 999--------+| 0860 SGP Split goods placement M 1 || || 0870 ----- Segment group 23 ------------------ C 9---------+|| 0880 MEA Measurements M 1 ||| 0890 EQN Number of units C 1---------++| | 0900 ----- Segment group 24 ------------------ C 9----------+| 0910 DGS Dangerous goods M 1 || 0920 FTX Free text C 99 || || 0930 ----- Segment group 25 ------------------ C 9---------+|| 0940 CTA Contact information M 1 ||| 0950 COM Communication contact C 9---------+|| || 0960 ----- Segment group 26 ------------------ C 9---------+|| 0970 MEA Measurements M 1 ||| 0980 EQN Number of units C 1---------+|| || 0990 ----- Segment group 27 ------------------ C 999-------+|| 1000 SGP Split goods placement M 1 ||| ||| 1010 ----- Segment group 28 ------------------ C 9--------+||| 1020 MEA Measurements M 1 |||| 1030 EQN Number of units C 1--------++++ 1040 ----- Segment group 29 ------------------ C 999---------+ 1050 EQD Equipment details M 1 | 1060 EQN Number of units C 1 | 1070 TMD Transport movement details C 1 | 1080 MEA Measurements C 9 | 1090 DIM Dimensions C 9 | 1100 TPL Transport placement C 9 | 1110 HAN Handling instructions C 1 | 1120 TMP Temperature C 1 | 1130 FTX Free text C 9 | 1140 RFF Reference C 9 | | 1150 ----- Segment group 30 ------------------ C 9----------+| 1160 NAD Name and address M 1 || 1170 DTM Date/time/period C 1 || || 1180 ----- Segment group 31 ------------------ C 9---------+|| 1190 CTA Contact information M 1 ||| 1200 COM Communication contact C 9---------+++ 1210 UNT Message trailer M 1