United Nations Directories
for Electronic Data Interchange for
Administration, Commerce and Transport
UN/EDIFACT
| United Nations Directories for Electronic Data Interchange for Administration, Commerce and Transport UN/EDIFACT |
Message Type : IFTMAN Version : D Release : 11A Contr. Agency: UN Revision : 11 Date : 2011-06-29 SOURCE: TBG3 Transport CONTENTS Arrival notice message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 3.2 Message terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table --------------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction --------------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Arrival notice message (IFTMAN) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE This paper provides the definition of the Arrival Notice Message to be used in fulfilling the requirements of trading partners in the transport chain worldwide, in the interchange of cargo and transport related information using Electronic Data Interchange (EDI). This message is a single consignment based message, being aligned with other single consignment based messages such as the booking (IFTMBP, IFTMBF and IFTMBC) and instruction messages (IFTMIN and IFTMCS). The single consignment based messages can be used by all modes of transport for the forwarding and transport of goods from any origin to any destination, regardless of route or prevailing commercial practice. These messages are suitable for the arrangement of the transport of goods between all parties to the movement of the consignment (including the consignor/shipper and consignee as well as the forwarders, brokers, and carriers involved) as well as providing the information necessary to perform that transport and delivery of the goods. They should be used in the same way by each mode of transport when the requirements are common even if functionally similar information is known by different names. 1.1 Functional definition A message from the party providing forwarding and/or transport services to the party such as has been indicated in the contract, giving notice and details of the arrival of the consignment. 1.2 Field of application The Arrival notice message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles The notify party might be the consignee or his agent or the customs broker depending on the custom of the port or the conditions in the contract. - A consignment may contain several goods items. - Goods items may or may not be containerized. - A goods item may be transported in one or more containers, and a single container may contain one or more goods items. - One goods item may be related to one or more customs tariff codes. - Goods items related to one customs tariff code may be carried in one or more containers. - Goods items may reflect either the contractual or operational description of the goods. - Equipment may have other types of equipment attached to it, e.g. a temperature control unit attached to a container. - Equipment and/or goods items may be attached to or transported on another load or transport device, which as such may be attached to or transported on yet another load or transport device, e.g. a container on a chassis on a rail-car. - Transport devices, which have the ability of powered movement on their own, are specified in the transport details group. Other load or transport devices are specified as equipment. - The expression of packaging for goods items can be expressed at up to three levels. The transport sub-working group (D4) has developed recommendations for a harmonised implementation of this message through its subgroup ITIGG (International Transport Implementation Guidelines Group). Users implementing the message are strongly advised to apply these recommendations, which may be obtained from the D4 secretariat. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 3.2 Message terms and definitions A number of generic transport terms are used in this specification, to be described as: * MODE OF TRANSPORT: The method of transport used for the conveyance of goods or persons, e.g. by rail, by road, by sea. * MEANS OF TRANSPORT: The vehicle used for the transport of goods or persons, e.g. aircraft, truck, vessel. * TYPE OF MEANS OF TRANSPORT: The type of vehicle used in the transport process, e.g. wide body, tank truck, passenger vessel. * EQUIPMENT: Material resources necessary to facilitate the transport and handling of cargo. Transport equipment does under the given circumstances not have the ability to move by its own propulsion (e.g. sea container, trailer, unit load device, pallet). * TYPE OF EQUIPMENT: The type of material used, e.g. 40 feet container, four way pallet, mafi trailer. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. 0010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Arrival notice message is IFTMAN. Note: Arrival notice messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 IFTMAN 0052 D 0054 11A 0051 UN 0020 BGM, Beginning of message A segment to indicate the beginning of a message and to transmit identifying number and type of the message. 0030 CTA, Contact information A segment to identify a person or department to whom communication should be directed. 0040 COM, Communication contact A segment to identify a communication number of a person or department to whom communication should be directed. 0050 DTM, Date/time/period A segment to indicate a date and time applying to the whole message, e.g., date and time of document issue. 0060 TSR, Transport service requirements A segment to identify the contract, conditions of carriage, services, and priority requirements for the transport. 0070 CUX, Currencies A segment to indicate default currencies and exchange rates. 0080 MOA, Monetary amount A segment to indicate a monetary value for entire consignment, e.g. insured value, invoice amount, disbursements, etc. 0090 FTX, Free text A segment to specify free form or processable supplementary information, such as status of transport, remarks to be printed on the transport documents (where required), consignment remarks, insurance instructions, etc., or any other additional information. 0100 CNT, Control total A segment to specify totals for a consignment. 0110 GDS, Nature of cargo A segment to describe the nature of cargo. 0120 Segment group 1: LOC-DTM A group of segments to specify locations and related date(s)/time(s) which apply to the entire message, e.g. place of transhipment. 0130 LOC, Place/location identification A segment to identify a location applying to the entire message. 0140 DTM, Date/time/period A segment to indicate date(s) and time(s) relating to the location. 0150 Segment group 2: TOD-LOC A group of segments to specify terms of delivery and related locations. 0160 TOD, Terms of delivery or transport A segment to specify the applicable terms of delivery. 0170 LOC, Place/location identification A segment to specify a location related to the terms of delivery. 0180 Segment group 3: RFF-DTM A group of segments containing a reference and constants which apply to the entire message. 0190 RFF, Reference A segment to express a reference which applies to the entire message such as: the document/message number that is to be updated by this very message (according to data element 1225 Message function code in segment BGM), booking reference, order number, insurance contract, etc. 0200 DTM, Date/time/period A segment to indicate date and time relating to the reference. 0210 Segment group 4: GOR-DTM-LOC-SEL-FTX-SG5 A group of segments to identify customs and other governmental procedures and required documents. 0220 GOR, Governmental requirements A segment to indicate applicable governmental procedures related to import, export and transport of the goods. 0230 DTM, Date/time/period A segment to indicate date and time related to documents and/or Customs- and/or governmental procedures for the consignment (e.g. date of issuing of Customs document, expiration date of Customs document, etc.). 0240 LOC, Place/location identification A segment to specify locations associated with Customs- and/or governmental procedures (e.g. Customs office of exit, Customs office of destination, etc.). 0250 SEL, Seal number A segment to identify seals and seal issuer associated with the Customs procedure and/or Customs document for the consignment. 0260 FTX, Free text A segment to provide supplementary governmental requirements information. 0270 Segment group 5: DOC-DTM A group of segments to specify required documents by government. 0280 DOC, Document/message details A segment to indicate a document required by government. 0290 DTM, Date/time/period A segment to specify the date/time related to the required document. 0300 Segment group 6: CPI-RFF-CUX-LOC-MOA A group of segments to indicate charge methodology which applies to the entire message. 0310 CPI, Charge payment instructions A segment to indicate default charge methodology. 0320 RFF, Reference A segment to indicate a reference relating to the CPI segment, such as charge reference number. 0330 CUX, Currencies A segment to specify the payment currency related to the charge methodology. 0340 LOC, Place/location identification A segment to identify the place of charge collection. 0350 MOA, Monetary amount A segment to identify the monetary amount associated with the charges. 0360 Segment group 7: TCC-LOC-FTX-CUX-PRI-EQN-PCD-MOA-QTY A group of segments to specify charge calculations associated with the transport. 0370 TCC, Charge/rate calculations A segment to specify charge. 0380 LOC, Place/location identification A segment to indicate a location. 0390 FTX, Free text A segment to specify processable supplementary information associated with charge. 0400 CUX, Currencies A segment to specify currencies associated with charge. 0410 PRI, Price details A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram). 0420 EQN, Number of units A segment to specify the number of units to which the unit price basis applies. 0430 PCD, Percentage details A segment to indicate the applicable reduction or surcharge percentage details. 0440 MOA, Monetary amount A segment to specify a monetary amount, such as prepaid amount, discount or total amount. 0450 QTY, Quantity A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 0460 Segment group 8: TDT-DTM-SG9-SG10-SG11 A group of segments to indicate details of the movement of goods such as mode and means of transport, locations, departure, and arrival date(s) and time(s). 0470 TDT, Transport information A segment to indicate information related to a certain stage of the transport, such as mode, means and carrier. 0480 DTM, Date/time/period A segment to indicate date(s) and time(s) related to the transport stage. 0490 Segment group 9: TSR-SCC A group of segments to specify transport service requirements and scheduling conditions 0500 TSR, Transport service requirements A segment to identify contract, conditions of carriage, services, priority requirements for this stage of transport. 0510 SCC, Scheduling conditions A segment to specify scheduling conditions associated to service requirements 0520 Segment group 10: LOC-DTM A group of segments to specify a location and date/time related to this leg of transport. 0530 LOC, Place/location identification A segment to indicate a location such as origin, destination, stop off, etc. related to this leg of transport. 0540 DTM, Date/time/period A segment to specify a date/time related to the location, such as arrival date/time of a means of transport at a specific location. 0550 Segment group 11: RFF-DTM A group of segments to specify an additional reference related to the stage of the transport. 0560 RFF, Reference A segment to specify the additional reference. 0570 DTM, Date/time/period A segment to identify date and time relating to the reference. 0580 Segment group 12: NAD-LOC-MOA-SG13-SG14-SG15-SG16-SG17-SG18 A group of segments to identify a party, related references, locations contacts, required documents, and charges to be paid by the party. 0590 NAD, Name and address A segment to identify the party's name, address, and function. 0600 LOC, Place/location identification A segment to indicate location where a specific function will be performed. 0610 MOA, Monetary amount A segment to identify the monetary amount associated with the party. 0620 Segment group 13: CTA-COM A group of segments identifying a contact and its communications related to the party. 0630 CTA, Contact information A segment to identify a person or department within a party. 0640 COM, Communication contact A segment to identify a communication number of a person or department to whom communication should be directed. 0650 Segment group 14: DOC-DTM A group of segments to identify required documents. 0660 DOC, Document/message details A segment to identify a document required of, by or for the party. 0670 DTM, Date/time/period A segment to identify date and time relating to the reference. 0680 Segment group 15: TCC-CUX-PRI-EQN-PCD-MOA-QTY A group of segments to specify charges associated with the party. 0690 TCC, Charge/rate calculations A segment to specify charges associated with the party. 0700 CUX, Currencies A segment to specify currency details related to the freight charge. 0710 PRI, Price details A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram). 0720 EQN, Number of units A segment to specify the number of units to which the unit price basis applies. 0730 PCD, Percentage details A segment to indicate the applicable reduction or surcharge percentage details. 0740 MOA, Monetary amount A segment to specify a monetary amount, such as prepaid amount, discount or total amount. 0750 QTY, Quantity A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 0760 Segment group 16: RFF-DTM A group of segments to specify a reference related to the party. 0770 RFF, Reference A segment to identify a reference used by a party. 0780 DTM, Date/time/period A segment to indicate date and time relating to the reference. 0790 Segment group 17: CPI-RFF-CUX-LOC-MOA A group of segments to identify the charge and its amount to be paid by the party. 0800 CPI, Charge payment instructions A segment to identify default charge methodology. 0810 RFF, Reference A segment to indicate a reference relating to the CPI segment, such as charge reference number. 0820 CUX, Currencies A segment to indicate payment currency related to the charge methodology. 0830 LOC, Place/location identification A segment to identify the place of charge collection. 0840 MOA, Monetary amount A segment to identify the monetary amount associated with the charges. 0850 Segment group 18: TSR-RFF-LOC-TPL-FTX A group of segments to specify a transport service requirement and its associated details (such as applicable commercial agreement) related to the party. 0860 TSR, Transport service requirements A segment to specify a required service for the transport, such as re-icing. 0870 RFF, Reference A segment to identify a commercial agreement related to the service requirement. 0880 LOC, Place/location identification A segment to indicate the location where the required service must be performed, such as place of re-icing. 0890 TPL, Transport placement A segment to identify the means of transport to which the service requirement applies. 0900 FTX, Free text A segment to provide any additional information related to the service requirement. 0910 Segment group 19: GID-HAN-TMP-RNG-TMD-LOC-MOA-PIA-FTX-PCD-SG20-GDS- SG21-SG22-SG23-SG24-SG25-SG26-SG28-SG30-SG31 A group of segments to describe the goods items for which transport is undertaken. 0920 GID, Goods item details A segment to identify a goods item for which transport is undertaken. A goods item can be identified by up to three levels of packaging. 0930 HAN, Handling instructions A segment to specify handling instructions relating to the goods item. 0940 TMP, Temperature A segment to specify a temperature setting for a goods item. 0950 RNG, Range details A segment to specify a temperature range setting for a goods item. 0960 TMD, Transport movement details A segment to specify transport movement details for a goods item. 0970 LOC, Place/location identification A segment to specify a country associated with a goods item, such as country of origin, or country of destination. 0980 MOA, Monetary amount A segment to specify a monetary amount associated with a goods item, such as declared value, FOB value, etc. 0990 PIA, Additional product id A segment to specify article numbers. 1000 FTX, Free text A segment to specify processable supplementary information relating to the goods item. 1010 PCD, Percentage details A segment to specify percentages related to cargo shipped in controlled atmosphere equipment such as percentage humidity. 1020 Segment group 20: NAD-DTM-LOC A group of segments to identify different places of collection and/or delivery for the goods item. 1030 NAD, Name and address A segment to specify an address of a place of collection or delivery for a goods item. 1040 DTM, Date/time/period A segment to indicate date and time relating to the place of collection or delivery. 1050 LOC, Place/location identification A segment to provide location information which is related to the current party. 1060 GDS, Nature of cargo A segment to describe the nature of cargo. 1070 Segment group 21: MEA-EQN A group of segments to specify measurements applicable to a goods item. 1080 MEA, Measurements A segment to specify measurements, other than dimensions, applicable to a goods item. 1090 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 1100 Segment group 22: DIM-EQN A group of segments to specify dimensions applicable to a goods item. 1110 DIM, Dimensions To specify dimensions applicable to a goods item. 1120 EQN, Number of units A segment to specify the number of equipment units to each of which the given dimension applies. 1130 Segment group 23: RFF-DTM A group of segments to identify references to a goods item. 1140 RFF, Reference A segment to identify a reference to a goods item. 1150 DTM, Date/time/period A segment to indicate date and time relating to the reference. 1160 Segment group 24: PCI-RFF-DTM-GIN A group of segments to specify marks and numbers of a goods item. 1170 PCI, Package identification A segment to specify marks and numbers of a good item. 1180 RFF, Reference A segment to identify a reference relating to the marks and numbers. 1190 DTM, Date/time/period A segment to identify date and time of the reference. 1200 GIN, Goods identity number A segment to specify identifying numbers related to transport units, such as batch numbers, serial numbers, etc. 1210 Segment group 25: DOC-DTM A group of segments to specify documents and associated date(s) and time(s) for a goods item. 1220 DOC, Document/message details A segment to specify a document prepared for a goods item. 1230 DTM, Date/time/period A segment to associate date and time with the prepared document. 1240 Segment group 26: TPL-SG27 A group of segments to identify transport details and associated measurements for a goods item. This group may be repeated to indicate the different phases of the movement. 1250 TPL, Transport placement A segment to identify transport details for a goods item. 1260 Segment group 27: MEA-EQN A group of segments to identify measurements. 1270 MEA, Measurements A segment to specify the distribution of a goods item among the transport details. 1280 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 1290 Segment group 28: SGP-SG29 A group of segments to specify the distribution of a goods item among the transport equipment. 1300 SGP, Split goods placement A segment to identify the equipment in which goods are transported. 1310 Segment group 29: MEA-EQN A group of segments to identify measurements. 1320 MEA, Measurements A segment to specify measurements of that portion of the goods item in the equipment. 1330 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 1340 Segment group 30: TCC-CUX-PRI-EQN-PCD-MOA-QTY-LOC A group of segments to specify charge associated with the goods item. 1350 TCC, Charge/rate calculations A segment to specify charge associated with the goods item. 1360 CUX, Currencies A segment to specify currencies associated with charge. 1370 PRI, Price details A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram). 1380 EQN, Number of units A segment to specify the number of units to which the unit price basis applies. 1390 PCD, Percentage details A segment to indicate the applicable reduction or surcharge percentage details. 1400 MOA, Monetary amount A segment to specify a monetary amount, such as prepaid amount, discount or total amount. 1410 QTY, Quantity A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 1420 LOC, Place/location identification A segment to indicate location where a specific function will be performed. 1430 Segment group 31: DGS-FTX-SG32-SG33-SG34 A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes. 1440 DGS, Dangerous goods A segment to indicate the class of dangerous goods, packing group, etc. 1450 FTX, Free text A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information. 1460 Segment group 32: CTA-COM A group of segments to identify a contact to whom communication regarding the dangerous goods can be directed. 1470 CTA, Contact information A segment to identify a person or department. 1480 COM, Communication contact A segment to identify a communication number of a person or department. 1490 Segment group 33: MEA-EQN A group of segments to identify dangerous goods measurements. 1500 MEA, Measurements A segment to specify measurements of the dangerous goods. 1510 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 1520 Segment group 34: SGP-SG35 A group of segments to specify the distribution of the dangerous goods among the transport equipment. 1530 SGP, Split goods placement A segment to identify the equipment in which the dangerous goods are transported. 1540 Segment group 35: MEA-EQN A group of segments to identify dangerous goods measurements. 1550 MEA, Measurements A segment to specify measurements of that portion of the dangerous goods in the equipment. 1560 EQN, Number of units A segment to specify the number of equipment units of which the given measurement applies. 1570 Segment group 36: EQD-EQN-TMD-MEA-DIM-SEL-TPL-HAN-TMP-FTX-RFF-SG37- SG38-SG39-SG40 A group of segments to specify equipment in which goods are transported. 1580 EQD, Equipment details A segment to specify equipment, and equipment size and type used in the transport. 1590 EQN, Number of units A segment to specify number of pieces of equipment required. 1600 TMD, Transport movement details A segment to specify transport movement details for the equipment. 1610 MEA, Measurements A segment to specify measurements, other than dimensions, associated with the equipment, such as weight. 1620 DIM, Dimensions A segment to specify dimensions applicable to equipment. 1630 SEL, Seal number A segment to identify seal and seal issuer associated with the equipment. 1640 TPL, Transport placement A segment to identify transport details for the equipment. 1650 HAN, Handling instructions A segment to specify handling instructions for specified equipment. 1660 TMP, Temperature A segment to specify a temperature setting for the equipment. 1670 FTX, Free text A segment to specify processable supplementary information associated with the equipment. 1680 RFF, Reference A segment to specify a reference number to equipment. 1690 Segment group 37: TCC-CUX-PRI-EQN-PCD-MOA-QTY A group of segments to specify charges associated with the equipment. 1700 TCC, Charge/rate calculations A segment to specify a charge associated with the equipment. 1710 CUX, Currencies A segment to specify currency details related to the freight charge. 1720 PRI, Price details A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram). 1730 EQN, Number of units A segment to specify the number of units to which the unit price basis applies. 1740 PCD, Percentage details A segment to indicate the applicable reduction or surcharge percentage details. 1750 MOA, Monetary amount A segment to specify a monetary amount, such as prepaid amount, discount or total amount. 1760 QTY, Quantity A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 1770 Segment group 38: NAD-DTM-LOC A group of segments to identify different equipment pick-up or drop-off places. 1780 NAD, Name and address A segment to specify a pick-up or drop-off address. 1790 DTM, Date/time/period A segment to indicate date and time relating to pick-up or drop-off. 1800 LOC, Place/location identification A segment to provide location information which is related to the current party. 1810 Segment group 39: EQA-EQN A group of segments to specify the attached equipment and related number of pieces. 1820 EQA, Attached equipment A segment to identify attached or related equipment such as a chassis attached to a container. 1830 EQN, Number of units A segment to specify number of pieces of equipment required. 1840 Segment group 40: DGS-FTX-SG41 A group of segments to specify dangerous goods. 1850 DGS, Dangerous goods A segment to indicate the dangerous goods regulations which apply, the class of the dangerous goods, additional dangerous goods codes, the United Nations Dangerous Goods (UNDG) number and the shipment flash point. 1860 FTX, Free text A segment to specify supplementary details regarding the dangerous goods such as dangerous goods technical name and other additional information. 1870 Segment group 41: CTA-COM A group of segments to specify contact information. 1880 CTA, Contact information A segment to identify a person or department to be contacted regarding dangerous goods. 1890 COM, Communication contact A segment to specify communication details of the dangerous goods contact. 1900 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) BGM Beginning of message CNT Control total COM Communication contact CPI Charge payment instructions CTA Contact information CUX Currencies DGS Dangerous goods DIM Dimensions DOC Document/message details DTM Date/time/period EQA Attached equipment EQD Equipment details EQN Number of units FTX Free text GDS Nature of cargo GID Goods item details GIN Goods identity number GOR Governmental requirements HAN Handling instructions LOC Place/location identification MEA Measurements MOA Monetary amount NAD Name and address PCD Percentage details PCI Package identification PIA Additional product id PRI Price details QTY Quantity RFF Reference RNG Range details SCC Scheduling conditions SEL Seal number SGP Split goods placement TCC Charge/rate calculations TDT Transport information TMD Transport movement details TMP Temperature TOD Terms of delivery or transport TPL Transport placement TSR Transport service requirements UNH Message header UNT Message trailer
4.3 Message structure 4.3.1 Segment table Pos Tag Name S R 0010 UNH Message header M 1 0020 BGM Beginning of message M 1 0030 CTA Contact information C 1 0040 COM Communication contact C 9 0050 DTM Date/time/period C 9 0060 TSR Transport service requirements C 9 0070 CUX Currencies C 9 0080 MOA Monetary amount C 99 0090 FTX Free text C 99 0100 CNT Control total C 9 0110 GDS Nature of cargo C 9 0120 ----- Segment group 1 ------------------ C 99---------------+ 0130 LOC Place/location identification M 1 | 0140 DTM Date/time/period C 9----------------+ 0150 ----- Segment group 2 ------------------ C 2----------------+ 0160 TOD Terms of delivery or transport M 1 | 0170 LOC Place/location identification C 9----------------+ 0180 ----- Segment group 3 ------------------ C 99---------------+ 0190 RFF Reference M 1 | 0200 DTM Date/time/period C 9----------------+ 0210 ----- Segment group 4 ------------------ C 9----------------+ 0220 GOR Governmental requirements M 1 | 0230 DTM Date/time/period C 9 | 0240 LOC Place/location identification C 9 | 0250 SEL Seal number C 9 | 0260 FTX Free text C 9 | | 0270 ----- Segment group 5 ------------------ C 9---------------+| 0280 DOC Document/message details M 1 || 0290 DTM Date/time/period C 1---------------++ 0300 ----- Segment group 6 ------------------ C 9----------------+ 0310 CPI Charge payment instructions M 1 | 0320 RFF Reference C 99 | 0330 CUX Currencies C 1 | 0340 LOC Place/location identification C 9 | 0350 MOA Monetary amount C 9----------------+ 0360 ----- Segment group 7 ------------------ C 99---------------+ 0370 TCC Charge/rate calculations M 1 | 0380 LOC Place/location identification C 1 | 0390 FTX Free text C 1 | 0400 CUX Currencies C 1 | 0410 PRI Price details C 1 | 0420 EQN Number of units C 1 | 0430 PCD Percentage details C 1 | 0440 MOA Monetary amount C 9 | 0450 QTY Quantity C 9----------------+ 0460 ----- Segment group 8 ------------------ C 99---------------+ 0470 TDT Transport information M 1 | 0480 DTM Date/time/period C 9 | | 0490 ----- Segment group 9 ------------------ C 9---------------+| 0500 TSR Transport service requirements M 1 || 0510 SCC Scheduling conditions C 9---------------+| | 0520 ----- Segment group 10 ------------------ C 99--------------+| 0530 LOC Place/location identification M 1 || 0540 DTM Date/time/period C 9---------------+| | 0550 ----- Segment group 11 ------------------ C 9---------------+| 0560 RFF Reference M 1 || 0570 DTM Date/time/period C 1---------------++ 0580 ----- Segment group 12 ------------------ C 99---------------+ 0590 NAD Name and address M 1 | 0600 LOC Place/location identification C 9 | 0610 MOA Monetary amount C 9 | | 0620 ----- Segment group 13 ------------------ C 9---------------+| 0630 CTA Contact information M 1 || 0640 COM Communication contact C 9---------------+| | 0650 ----- Segment group 14 ------------------ C 9---------------+| 0660 DOC Document/message details M 1 || 0670 DTM Date/time/period C 1---------------+| | 0680 ----- Segment group 15 ------------------ C 99--------------+| 0690 TCC Charge/rate calculations M 1 || 0700 CUX Currencies C 1 || 0710 PRI Price details C 1 || 0720 EQN Number of units C 1 || 0730 PCD Percentage details C 1 || 0740 MOA Monetary amount C 9 || 0750 QTY Quantity C 9---------------+| | 0760 ----- Segment group 16 ------------------ C 9---------------+| 0770 RFF Reference M 1 || 0780 DTM Date/time/period C 9---------------+| | 0790 ----- Segment group 17 ------------------ C 9---------------+| 0800 CPI Charge payment instructions M 1 || 0810 RFF Reference C 99 || 0820 CUX Currencies C 1 || 0830 LOC Place/location identification C 9 || 0840 MOA Monetary amount C 9---------------+| | 0850 ----- Segment group 18 ------------------ C 99--------------+| 0860 TSR Transport service requirements M 1 || 0870 RFF Reference C 1 || 0880 LOC Place/location identification C 1 || 0890 TPL Transport placement C 1 || 0900 FTX Free text C 9---------------++ 0910 ----- Segment group 19 ------------------ C 99999------------+ 0920 GID Goods item details M 1 | 0930 HAN Handling instructions C 1 | 0940 TMP Temperature C 1 | 0950 RNG Range details C 1 | 0960 TMD Transport movement details C 1 | 0970 LOC Place/location identification C 9 | 0980 MOA Monetary amount C 9 | 0990 PIA Additional product id C 9 | 1000 FTX Free text C 9 | 1010 PCD Percentage details C 9 | | 1020 ----- Segment group 20 ------------------ C 9---------------+| 1030 NAD Name and address M 1 || 1040 DTM Date/time/period C 1 || 1050 LOC Place/location identification C 9---------------+| 1060 GDS Nature of cargo C 9 | | 1070 ----- Segment group 21 ------------------ C 99--------------+| 1080 MEA Measurements M 1 || 1090 EQN Number of units C 1---------------+| | 1100 ----- Segment group 22 ------------------ C 99--------------+| 1110 DIM Dimensions M 1 || 1120 EQN Number of units C 1---------------+| | 1130 ----- Segment group 23 ------------------ C 9---------------+| 1140 RFF Reference M 1 || 1150 DTM Date/time/period C 9---------------+| | 1160 ----- Segment group 24 ------------------ C 9---------------+| 1170 PCI Package identification M 1 || 1180 RFF Reference C 1 || 1190 DTM Date/time/period C 1 || 1200 GIN Goods identity number C 9---------------+| | 1210 ----- Segment group 25 ------------------ C 9---------------+| 1220 DOC Document/message details M 1 || 1230 DTM Date/time/period C 9---------------+| | 1240 ----- Segment group 26 ------------------ C 9---------------+| 1250 TPL Transport placement M 1 || || 1260 ----- Segment group 27 ------------------ C 9--------------+|| 1270 MEA Measurements M 1 ||| 1280 EQN Number of units C 1--------------++| | 1290 ----- Segment group 28 ------------------ C 999-------------+| 1300 SGP Split goods placement M 1 || || 1310 ----- Segment group 29 ------------------ C 9--------------+|| 1320 MEA Measurements M 1 ||| 1330 EQN Number of units C 1--------------++| | 1340 ----- Segment group 30 ------------------ C 99--------------+| 1350 TCC Charge/rate calculations M 1 || 1360 CUX Currencies C 1 || 1370 PRI Price details C 1 || 1380 EQN Number of units C 1 || 1390 PCD Percentage details C 1 || 1400 MOA Monetary amount C 9 || 1410 QTY Quantity C 9 || 1420 LOC Place/location identification C 9---------------+| | 1430 ----- Segment group 31 ------------------ C 99--------------+| 1440 DGS Dangerous goods M 1 || 1450 FTX Free text C 99 || || 1460 ----- Segment group 32 ------------------ C 9--------------+|| 1470 CTA Contact information M 1 ||| 1480 COM Communication contact C 9--------------+|| || 1490 ----- Segment group 33 ------------------ C 9--------------+|| 1500 MEA Measurements M 1 ||| 1510 EQN Number of units C 1--------------+|| || 1520 ----- Segment group 34 ------------------ C 999------------+|| 1530 SGP Split goods placement M 1 ||| ||| 1540 ----- Segment group 35 ------------------ C 9-------------+||| 1550 MEA Measurements M 1 |||| 1560 EQN Number of units C 1-------------++++ 1570 ----- Segment group 36 ------------------ C 999--------------+ 1580 EQD Equipment details M 1 | 1590 EQN Number of units C 1 | 1600 TMD Transport movement details C 1 | 1610 MEA Measurements C 9 | 1620 DIM Dimensions C 9 | 1630 SEL Seal number C 99 | 1640 TPL Transport placement C 9 | 1650 HAN Handling instructions C 1 | 1660 TMP Temperature C 1 | 1670 FTX Free text C 9 | 1680 RFF Reference C 9 | | 1690 ----- Segment group 37 ------------------ C 99--------------+| 1700 TCC Charge/rate calculations M 1 || 1710 CUX Currencies C 1 || 1720 PRI Price details C 1 || 1730 EQN Number of units C 1 || 1740 PCD Percentage details C 1 || 1750 MOA Monetary amount C 9 || 1760 QTY Quantity C 9---------------+| | 1770 ----- Segment group 38 ------------------ C 9---------------+| 1780 NAD Name and address M 1 || 1790 DTM Date/time/period C 1 || 1800 LOC Place/location identification C 9---------------+| | 1810 ----- Segment group 39 ------------------ C 99--------------+| 1820 EQA Attached equipment M 1 || 1830 EQN Number of units C 1---------------+| | 1840 ----- Segment group 40 ------------------ C 99--------------+| 1850 DGS Dangerous goods M 1 || 1860 FTX Free text C 9 || || 1870 ----- Segment group 41 ------------------ C 9--------------+|| 1880 CTA Contact information M 1 ||| 1890 COM Communication contact C 9--------------+++ 1900 UNT Message trailer M 1