United Nations Directories
for Electronic Data Interchange for
Administration, Commerce and Transport
UN/EDIFACT
| United Nations Directories for Electronic Data Interchange for Administration, Commerce and Transport UN/EDIFACT |
Message Type : COARRI Version : D Release : 11B Contr. Agency: UN Revision : 9 Date : 2012-08-14 SOURCE: TBG3 Transport CONTENTS Container discharge/loading report message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table --------------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction --------------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Container discharge/loading report message (COARRI) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE 1.1 Functional definition A message by which the container terminal reports that the containers specified have been discharged from a seagoing vessel (discharged as ordered, overlanded or shortlanded), or have been loaded into a seagoing vessel. This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'. 1.2 Field of application The Container discharge/loading report message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles Business area: Loading and discharging of containers/equipment Sending functions include: Container terminal, Stevedore Receiving functions include: Ship's agent, Liner agent In the context of the 'Guide to the scenario of EDIFACT container messages' (as referred to at the start of section 1) the following guidelines, rules and functionality apply to this Container discharge/loading report message: * The message contents can be uniquely identified by a combination of the following data elements: - ordering customer, coded (NAD) - ordering customer agent, coded (NAD) - container discharge/loading order reference (RFF) The ordering customer agent, coded is needed to supplement the unique identification only in the following situation: the agent acts on behalf of several ordering customers issuing the same range of reference numbers for each customer. E.g., the ship's agent acts on behalf of several shipping lines issuing for each shipping line the same range of numbers. * A message contains information on only one visit/conveyance of a seagoing container vessel either arriving or departing. * A message contains a report of either discharged or loaded containers from or into the seagoing container vessel. One report message does not necessarily cover all loaded/discharged containers. * An indicator for the equipment status may be completed on container level (EQD-segment), e.g., import, overlanded or shortlanded (for a discharged container) or export (for a loaded container). * One shipping line can be specified on message level. * The seagoing container vessel and sea voyage number can be specified on message level. * For each container its cell position on board the container vessel and its port of discharge can be given. * For each container dangerous goods information can be specified. * A supplementary container reference number (container sequence number) is used to refer to the information of the container(s) in the loading order message, if the container prefix and number was not completed in that message. * Goods item details cannot be completed. The transport sub-working group (D4) has developed recommendations for a harmonised implementation of this message through its subgroup ITIGG (International Transport Implementation Guidelines Group). Users implementing the message are strongly advised to apply these recommendations, which may be obtained from the D4 secretariat. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. 00010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Container discharge/loading report message is COARRI. Note: Container discharge/loading report messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 COARRI 0052 D 0054 11B 0051 UN 00020 BGM, Beginning of message A segment to indicate the beginning of a message and to transmit identifying number and the further specification of the message type (in data element 1001: Document name code), such as Loading report, Discharge report. 00030 DTM, Date/time/period A segment to indicate a date and/or time applying to the whole message, such as date and time of document or message issue. 00040 FTX, Free text A segment to specify free form or processable supplementary information, such as: - change information 00050 Segment group 1: RFF-DTM A group of segments to specify a reference relating to the whole message, and its date and/or time. 00060 RFF, Reference A segment to express a reference which applies to the entire message, such as: - container discharge/loading order reference - reference to previous message 00070 DTM, Date/time/period A segment to indicate date and/or time related to the reference. 00080 Segment group 2: TDT-DTM-RFF-SG3 A group of segments to indicate the main carriage means of transport. 00090 TDT, Transport information A segment identifying the voyage of the vessel relevant to the message (main transport). 00100 DTM, Date/time/period A segment to identify the date(s) and time(s) related to the main carriage means of transport. 00110 RFF, Reference A segment identifying a relevant reference number, such as: - shipping - syndicate - marketing organization - conference code 00120 Segment group 3: LOC-DTM A segment group to identify locations related to the means of transport. 00130 LOC, Place/location identification A segment to specify a location related to the means of transport such as places and ports of arrival and departure. 00140 DTM, Date/time/period A segment to specify the date(s) and time(s) related to a location. 00150 Segment group 4: NAD-SG5 A group of segments to identify a party and related contacts. 00160 NAD, Name and address A segment to identify the party's name, address, and function, and other addresses, such as: - message recipient - message sender - ordering customer - ordering customer agent 00170 Segment group 5: CTA-COM A group of segments to identify a contact and its communications related to the party. 00180 CTA, Contact information A segment to identify a person or department of a message sender and/or message recipient, such as: - information contact 00190 COM, Communication contact A segment to identify a communication number of a person or department to whom communication should be directed. 00200 Segment group 6: EQD-RFF-GDS-TMD-DTM-SG7-MEA-DIM-SG8-SEL-FTX-PCD- SG9-EQA-PIA-COD-HAN-SG11-SG12-NAD A group of segments to specify containers either loaded or discharged; in the latter case - only in case of shortlanded - the group of segments is to specify containers that had to be discharged (according to the discharge order message). In a normal discharge report and load report message the container details are only required if they differ from the details given in the respective order message. In case of overlanded containers this group will contain the full container details giving as much information as possible. In case of shortlanded containers this group will only contain the container prefix and number. 00210 EQD, Equipment details A segment identifying a container, container size/type. The equipment status may be e.g. overlanded, shortlanded, import, export. 00220 RFF, Reference A segment identifying a relevant reference number, such as: - container sequence number - booking reference number 00230 GDS, Nature of cargo A segment to show the broad classification of the goods within a container for operational and general information purposes. 00240 TMD, Transport movement details A segment to indicate a Full Container Load (FCL) or a Less than Full Container Load (LCL). 00250 DTM, Date/time/period A segment to identify a date and time related to the equipment, such as: - Date and/or time of actual loading or discharge - CSC expiration date (International Convention for Safe Containers) 00260 Segment group 7: LOC-DTM A group of segments to identify a location or country related to the equipment. 00270 LOC, Place/location identification A segment to identify a location or country related to the equipment, such as: - stowage cell - (final) place/port of discharge - transhipment place - place of delivery - country of origin/destination 00280 DTM, Date/time/period A segment to specify date(s) and time(s) related to a location. 00290 MEA, Measurements A segment specifying a physical measurement related to the equipment, such as: - gross weight 00300 DIM, Dimensions A segment specifying physical dimensions related to the equipment, such as: - gross dimensions - off standard dimension general - off standard dimension left - off standard dimension right - off standard dimension back - off standard dimension front 00310 Segment group 8: TMP-RNG A segment group to identify transport related temperature settings. 00320 TMP, Temperature A segment which identifies the transport temperature setting of the container. 00330 RNG, Range details A segment to specify the transport temperature range setting of the container. 00340 SEL, Seal number A segment identifying a seal number related to the equipment. 00350 FTX, Free text A segment to specify supplementary information related to the equipment, such as: - blockade reason - government inspection service - container loading remarks - container remarks - container order information - additional remarks concerning the container - container safety convention plate - continuous examination program (ACEP) 00360 PCD, Percentage details A segment to specify percentages related to the equipment such as percentage humidity. 00370 Segment group 9: DGS-FTX-MEA-SG10 A group of segments to specify dangerous goods details. 00380 DGS, Dangerous goods A segment to identify the UN-number and the class of the dangerous goods loaded in the container. 00390 FTX, Free text A segment to give additional information regarding dangerous goods. 00400 MEA, Measurements A segment to specify measurements of the dangerous goods, such as: - net net weight. 00410 Segment group 10: CTA-COM A group of segments to specify contact information. 00420 CTA, Contact information A segment to identify a person or department to be contacted regarding dangerous goods. 00430 COM, Communication contact A segment to specify communication details of the dangerous goods contact. 00440 EQA, Attached equipment A segment to identify clip-on units, such as: - generator sets 00450 PIA, Additional product id A segment to specify a commodity code relating to goods in the container. 00460 COD, Component details A segment to specify the details of the components of transport equipment. 00470 HAN, Handling instructions A segment to specify handling instructions related to the equipment. 00480 Segment group 11: DAM-COD A group of segments to specify damage details related to the equipment. 00490 DAM, Damage A segment to specify equipment damages, such as the point of the damage on the equipment, and the type of damage. 00500 COD, Component details A segment to specify component details of the damaged equipment. 00510 Segment group 12: TDT-DTM-SG13 A group of segments to specify the planned on-carriage details in case this message is a discharge report message. 00520 TDT, Transport information A segment to identify the on-carriage transport details of the mode, means of transport by which the container will depart after being discharged. 00530 DTM, Date/time/period A segment to specify a date/time relating to the on-carriage transport, such as arrival or departure date/time. 00540 Segment group 13: LOC-DTM A group of segments to identify locations related to on- carriage transport. 00550 LOC, Place/location identification A segment identifying a location related to the transport details, such as: - place of departure 00560 DTM, Date/time/period A segment to specify a date/time relating to the on- carriage transport, such as arrival. 00570 NAD, Name and address A segment to specify a related address or party, such as: - container operator 00580 CNT, Control total A segment to specify the number of containers in the message, explicitly given by the sender. 00590 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) BGM Beginning of message CNT Control total COD Component details COM Communication contact CTA Contact information DAM Damage DGS Dangerous goods DIM Dimensions DTM Date/time/period EQA Attached equipment EQD Equipment details FTX Free text GDS Nature of cargo HAN Handling instructions LOC Place/location identification MEA Measurements NAD Name and address PCD Percentage details PIA Additional product id RFF Reference RNG Range details SEL Seal number TDT Transport information TMD Transport movement details TMP Temperature UNH Message header UNT Message trailer
4.3 Message structure 4.3.1 Segment table Pos Tag Name S R 00010 UNH Message header M 1 00020 BGM Beginning of message M 1 00030 DTM Date/time/period C 9 00040 FTX Free text C 9 00050 ---- Segment group 1 ------------------ C 9----------------+ 00060 RFF Reference M 1 | 00070 DTM Date/time/period C 9----------------+ 00080 ---- Segment group 2 ------------------ M 1----------------+ 00090 TDT Transport information M 1 | 00100 DTM Date/time/period C 9 | 00110 RFF Reference C 9 | | 00120 ---- Segment group 3 ------------------ C 9---------------+| 00130 LOC Place/location identification M 1 || 00140 DTM Date/time/period C 9---------------++ 00150 ---- Segment group 4 ------------------ M 9----------------+ 00160 NAD Name and address M 1 | | 00170 ---- Segment group 5 ------------------ C 9---------------+| 00180 CTA Contact information M 1 || 00190 COM Communication contact C 9---------------++ 00200 ---- Segment group 6 ------------------ C 9999-------------+ 00210 EQD Equipment details M 1 | 00220 RFF Reference C 9 | 00230 GDS Nature of cargo C 9 | 00240 TMD Transport movement details C 9 | 00250 DTM Date/time/period C 9 | | 00260 ---- Segment group 7 ------------------ C 9---------------+| 00270 LOC Place/location identification M 1 || 00280 DTM Date/time/period C 9---------------+| 00290 MEA Measurements C 9 | 00300 DIM Dimensions C 9 | | 00310 ---- Segment group 8 ------------------ C 9---------------+| 00320 TMP Temperature M 1 || 00330 RNG Range details C 1---------------+| 00340 SEL Seal number C 9 | 00350 FTX Free text C 9 | 00360 PCD Percentage details C 9 | | 00370 ---- Segment group 9 ------------------ C 99--------------+| 00380 DGS Dangerous goods M 1 || 00390 FTX Free text C 9 || 00400 MEA Measurements C 9 || || 00410 ---- Segment group 10 ------------------ C 9--------------+|| 00420 CTA Contact information M 1 ||| 00430 COM Communication contact C 9--------------++| 00440 EQA Attached equipment C 9 | 00450 PIA Additional product id C 9 | 00460 COD Component details C 1 | 00470 HAN Handling instructions C 9 | | 00480 ---- Segment group 11 ------------------ C 9---------------+| 00490 DAM Damage M 1 || 00500 COD Component details C 1---------------+| | 00510 ---- Segment group 12 ------------------ C 1---------------+| 00520 TDT Transport information M 1 || 00530 DTM Date/time/period C 9 || || 00540 ---- Segment group 13 ------------------ C 9--------------+|| 00550 LOC Place/location identification M 1 ||| 00560 DTM Date/time/period C 9--------------++| 00570 NAD Name and address C 9----------------+ 00580 CNT Control total C 1 00590 UNT Message trailer M 1