United Nations Directories for Electronic Data Interchange for Administration, Commerce and Transport UN/EDIFACT |
Message Type : IFTMIN Version : D Release : 13A Contr. Agency: UN Revision : 16 Date : 2013-10-08 SOURCE: TBG3 Transport CONTENTS Instruction message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 3.2 Message terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table --------------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction --------------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Instruction message (IFTMIN) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE This paper provides the definition of the Instruction Message to be used in fulfilling the requirements of trading partners in the transport chain worldwide, in the interchange of cargo and transport related information using Electronic Data Interchange (EDI). This message is a single consignment based message, being aligned with other single consignment based messages such as the booking messages (IFTMBP, IFTMBF and IFTMBC), the Instruction Contract Status Message (IFTMCS) and the Arrival Notice Message (IFTMAN). The single consignment based messages can be used by all modes of transport for the forwarding and transport of goods from any origin to any destination, regardless of route or prevailing commercial practice. These messages are suitable for the arrangement of the transport of goods between all parties to the movement of the consignment (including the consignor/shipper and consignee as well as the forwarders, brokers, and carriers involved) as well as providing the information necessary to perform that transport and delivery of the goods. They should be used in the same way by each mode of transport when the requirements are common even if functionally similar information is known by different names. 1.1 Functional definition A message from the party issuing an instruction regarding forwarding/transport services for a consignment under conditions agreed, to the party arranging the forwarding and/or transport services. 1.2 Field of application The Instruction message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles The instruction results in a transport contract for a consignment and is primarily meant for administrative purposes. It will be the message from shipper to carrier or forwarder containing the final details of the consignment for which services are provided. The instruction message is the one and only message which results in the actual contract which can either be a document or an electronic contract. If only one message will suffice in an exchange between a shipper and a carrier/forwarder the instruction message should be the one as this message is the only message that results in a contract. The receiving party is to ascertain whether the Instruction message is preceded by a Booking Firm message, to be able to interpret the function as being an administrative message only or an administrative and operational message. - A consignment may contain several goods items. - Goods items may or may not be containerized. - A goods item may be transported in one or more containers, and a single container may contain one or more goods items. - One goods item may be related to one or more customs tariff codes. - Goods items related to one customs tariff code may be carried in one or more containers. - Goods items may reflect either the contractual or operational description of the goods. - A party to the movement of the consignment may book or order transport for one or more goods items. - A party to the movement of the consignment may book or issue instructions of transport to be arranged for several goods items by means of one or several of the following messages: IFTMBP, IFTMBF, IFTMBC, IFTMIN, IFTMCS, IFTMAN. - Pre-carriage (advanced haulage) and/or on-carriage (destination haulage) of goods items or equipment within one booking or instruction may take place in different steps, each step specified with its own transport details group. - Equipment may have other types of equipment attached to it, e.g. a temperature control unit attached to a container. - Equipment and/or goods items may be attached to or transported on another load or transport device, which as such may be attached to or transported on yet another load or transport device, e.g. a container on a chassis on a rail-car. - Transport devices, which have the ability of powered movement on their own, are specified in the transport details group. Other load or transport devices are specified as equipment. - The expression of packaging for goods items can be expressed at up to three levels. The transport sub-working group (D4) has developed recommendations for a harmonised implementation of this message through its subgroup ITIGG (International Transport Implementation Guidelines Group). Users implementing the message are strongly advised to apply these recommendations, which may be obtained from the D4 secretariat. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 3.2 Message terms and definitions A number of generic transport terms are used in this specification, to be described as: * MODE OF TRANSPORT: The method of transport used for the conveyance of goods or persons, e.g. by rail, by road, by sea. * MEANS OF TRANSPORT: The vehicle used for the transport of goods or persons, e.g. aircraft, truck, vessel. * TYPE OF MEANS OF TRANSPORT: The type of vehicle used in the transport process, e.g. wide body, tank truck, passenger vessel. * EQUIPMENT: Material resources necessary to facilitate the transport and handling of cargo. Transport equipment does under the given circumstances not have the ability to move by its own propulsion (e.g. sea container, trailer, unit load device, pallet). * TYPE OF EQUIPMENT: The type of material used, e.g. 40 feet container, four way pallet, mafi trailer. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. 00010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Instruction message is IFTMIN. Note: Instruction messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 IFTMIN 0052 D 0054 13A 0051 UN 00020 BGM, Beginning of message A segment to indicate the beginning of a message and to transmit identifying number and type of the message. 00030 CTA, Contact information A segment to identify a person or department to whom communication should be directed. 00040 COM, Communication contact A segment to identify a communication number of a person or department to whom communication should be directed. 00050 DTM, Date/time/period A segment to indicate a date and time applying to the whole message, e.g., date and time of document issue. 00060 TSR, Transport service requirements A segment to identify the contract, conditions of carriage, services, and priority requirements for the transport. 00070 CUX, Currencies A segment to indicate default currencies and exchange rates. 00080 MOA, Monetary amount A segment to indicate a monetary value for entire consignment, e.g. insured value, invoice amount, disbursements, etc. 00090 FTX, Free text A segment to specify free form or processable supplementary information, such as status of transport, remarks to be printed on the transport documents (where required), consignment remarks, insurance instructions, etc., or any other additional information. 00100 CNT, Control total A segment to specify totals for a consignment. 00110 DOC, Document/message details A segment to indicate the number of document copies required (such as the number of ocean Bill of Lading copies needed by the customer). 00120 GDS, Nature of cargo A segment to describe the nature of cargo. 00130 Segment group 1: LOC-DTM A group of segments to specify locations and related date(s)/time(s) which apply to the entire message, e.g. place of transhipment. 00140 LOC, Place/location identification A segment to identify a location applying to the entire message. 00150 DTM, Date/time/period A segment to indicate date(s) and time(s) relating to the location. 00160 Segment group 2: TOD-LOC A group of segments to specify terms of delivery and related locations. 00170 TOD, Terms of delivery or transport A segment to specify the applicable terms of delivery. 00180 LOC, Place/location identification A segment to specify a location related to the terms of delivery. 00190 Segment group 3: RFF-DTM A group of segments containing a reference and constants which apply to the entire message. 00200 RFF, Reference A segment to express a reference which applies to the entire message such as: the document/message number that is to be updated by this very message (according to data element 1225 Message function code in segment BGM), booking reference, order number, insurance contract, etc. 00210 DTM, Date/time/period A segment to indicate date and time relating to the reference. 00220 Segment group 4: GOR-DTM-LOC-SEL-FTX-SG5 A group of segments to identify customs and other governmental procedures and required documents. 00230 GOR, Governmental requirements A segment to indicate applicable governmental procedures related to import, export and transport of the goods. 00240 DTM, Date/time/period A segment to indicate date and time related to documents and/or Customs- and/or governmental procedures for the consignment (e.g. date of issuing of Customs document, expiration date of Customs document, etc.). 00250 LOC, Place/location identification A segment to specify locations associated with Customs- and/or governmental procedures for the consignment (e.g. Customs office of exit, Customs office of destination, etc.). 00260 SEL, Seal number A segment to identify seals and seal issuer associated with the Customs procedure and/or Customs document for the consignment. 00270 FTX, Free text A segment to provide supplementary governmental requirements information. 00280 Segment group 5: DOC-DTM A group of segments to specify required documents by government. 00290 DOC, Document/message details A segment to indicate a document required by government. 00300 DTM, Date/time/period A segment to specify the date/time related to the required document. 00310 Segment group 6: CPI-RFF-CUX-LOC-MOA A group of segments to indicate charge methodology which applies to the entire message. 00320 CPI, Charge payment instructions A segment to indicate default charge methodology. 00330 RFF, Reference A segment to indicate a reference relating to the CPI segment, such as charge reference number. 00340 CUX, Currencies A segment to specify the payment currency related to the charge methodology. 00350 LOC, Place/location identification A segment to identify the place of charge collection. 00360 MOA, Monetary amount A segment to identify the monetary amount associated with the charges. 00370 Segment group 7: TCC-LOC-FTX-CUX-PRI-EQN-PCD-MOA-QTY A group of segments to specify charge calculations associated with the transport. 00380 TCC, Charge/rate calculations A segment to specify charge. 00390 LOC, Place/location identification A segment to indicate a location. 00400 FTX, Free text A segment to specify processable supplementary information associated with charge. 00410 CUX, Currencies A segment to specify currencies associated with charge. 00420 PRI, Price details A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram). 00430 EQN, Number of units A segment to specify the number of units to which the unit price basis applies. 00440 PCD, Percentage details A segment to indicate the applicable reduction or surcharge percentage details. 00450 MOA, Monetary amount A segment to specify a monetary amount, such as prepaid amount, discount or total amount. 00460 QTY, Quantity A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 00470 Segment group 8: TDT-DTM-SG9-SG10-SG11 A group of segments to indicate details of the movement of goods such as mode and means of transport, locations, departure, and arrival date(s) and time(s). 00480 TDT, Transport information A segment to indicate information related to a certain stage of the transport, such as mode, means and carrier. 00490 DTM, Date/time/period A segment to indicate date(s) and time(s) related to the transport stage. 00500 Segment group 9: TSR-SCC A group of segments to specify transport service requirements and scheduling conditions 00510 TSR, Transport service requirements A segment to identify contract, conditions of carriage, services, priority requirements for this stage of transport. 00520 SCC, Scheduling conditions A segment to specify scheduling conditions associated to service requirements. 00530 Segment group 10: LOC-DTM A group of segments to specify a location and date/time related to this leg of transport. 00540 LOC, Place/location identification A segment to indicate a location such as origin, destination, stop off, etc. related to this leg of transport. 00550 DTM, Date/time/period A segment to specify a date/time related to the location, such as arrival date/time of a means of transport at a specific location. 00560 Segment group 11: RFF-DTM A group of segments to specify an additional reference related to the stage of the transport. 00570 RFF, Reference A segment to specify the additional reference. 00580 DTM, Date/time/period A segment to identify date and time relating to the reference. 00590 Segment group 12: NAD-LOC-MOA-SG13-SG14-SG15-SG16-SG17-SG18 A group of segments to identify a party, related references, locations contacts, required documents, and charges to be paid by the party. 00600 NAD, Name and address A segment to identify the party's name, address, and function. 00610 LOC, Place/location identification A segment to indicate location where a specific function will be performed. 00620 MOA, Monetary amount A segment to identify the monetary amount associated with the party. 00630 Segment group 13: CTA-COM A group of segments identifying a contact and its communications related to the party. 00640 CTA, Contact information A segment to identify a person or department within a party. 00650 COM, Communication contact A segment to identify a communication number of a person or department to whom communication should be directed. 00660 Segment group 14: DOC-DTM A group of segments to identify required documents. 00670 DOC, Document/message details A segment to identify a document required of, by or for the party. 00680 DTM, Date/time/period A segment to identify date and time relating to the reference. 00690 Segment group 15: TCC-CUX-PRI-EQN-PCD-MOA-QTY A group of segments to specify charges associated with the party. 00700 TCC, Charge/rate calculations A segment to specify charges associated with the party. 00710 CUX, Currencies A segment to specify currency details related to the freight charge. 00720 PRI, Price details A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram). 00730 EQN, Number of units A segment to specify the number of units to which the unit price basis applies. 00740 PCD, Percentage details A segment to indicate the applicable reduction or surcharge percentage details. 00750 MOA, Monetary amount A segment to specify a monetary amount, such as prepaid amount, discount or total amount. 00760 QTY, Quantity A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 00770 Segment group 16: RFF-DTM A group of segments to specify a reference related to the party. 00780 RFF, Reference A segment to identify a reference used by a party. 00790 DTM, Date/time/period A segment to indicate date and time relating to the reference. 00800 Segment group 17: CPI-RFF-CUX-LOC-MOA A group of segments to identify the charge and its amount to be paid by the party. 00810 CPI, Charge payment instructions A segment to identify default charge methodology. 00820 RFF, Reference A segment to indicate a reference relating to the CPI segment, such as charge reference number. 00830 CUX, Currencies A segment to indicate payment currency related to the charge methodology. 00840 LOC, Place/location identification A segment to identify the place of charge collection. 00850 MOA, Monetary amount A segment to identify the monetary amount associated with the charges. 00860 Segment group 18: TSR-RFF-LOC-TPL-FTX A group of segments to specify a transport service requirement and its associated details (such as applicable commercial agreement) related to the party. 00870 TSR, Transport service requirements A segment to specify a required service for the transport, such as re-icing. 00880 RFF, Reference A segment to identify a commercial agreement related to the service requirement. 00890 LOC, Place/location identification A segment to indicate the location where the required service must be performed, such as place of re-icing. 00900 TPL, Transport placement A segment to identify the means of transport to which the service requirement applies. 00910 FTX, Free text A segment to provide any additional information related to the service requirement. 00920 Segment group 19: EFI-CED-COM-RFF-DTM-QTY A group of segments that refers through an external file identification to each of the external files and giving additional information about each of the files. 00930 EFI, External file link identification This segment will identify the external files by indicating the file name, file number and its sequence number in an exchange. 00940 CED, Computer environment details To give precise definitions of all necessary elements belonging to the configuration of a computer system, e.g. hardware, firmware, operating system, communication and application software. 00950 COM, Communication contact To identify a communication number of a department or a person to whom communication should be directed. 00960 RFF, Reference A segment giving reference related to the file identified by a previous external file link identification segment. 00970 DTM, Date/time/period This segment will convey the date/time details of the external file. 00980 QTY, Quantity The size/volume of the external file identified in the previous external file link identification segment. 00990 Segment group 20: GID-HAN-TMP-RNG-TMD-LOC-MOA-PIA-FTX-PCD-SG21-GDS- SG22-SG23-SG24-SG25-SG26-SG27-SG29-SG31-SG33-SG34 A group of segments to describe the goods items for which transport is undertaken. 01000 GID, Goods item details A segment to identify a goods item for which transport is undertaken. A goods item can be identified by up to three levels of packaging. 01010 HAN, Handling instructions A segment to specify handling instructions relating to the goods item. 01020 TMP, Temperature A segment to specify a temperature setting for a goods item. 01030 RNG, Range details A segment to specify a temperature range setting for a goods item. 01040 TMD, Transport movement details A segment to specify transport movement details for a goods item. 01050 LOC, Place/location identification A segment to specify a country associated with a goods item, such as country of origin, or country of destination. 01060 MOA, Monetary amount A segment to specify a monetary amount associated with a goods item, such as declared value, FOB value, etc. 01070 PIA, Additional product id A segment to specify article numbers. 01080 FTX, Free text A segment to specify processable supplementary information relating to the goods item. 01090 PCD, Percentage details A segment to specify percentages related to controlled atmosphere cargo. 01100 Segment group 21: NAD-DTM-LOC A group of segments to identify different places of collection and/or delivery for the goods item. 01110 NAD, Name and address A segment to specify an address of a place of collection or delivery for a goods item. 01120 DTM, Date/time/period A segment to indicate date and time relating to the place of collection or delivery. 01130 LOC, Place/location identification A segment to provide location information which is related to the current party. 01140 GDS, Nature of cargo A segment to describe the nature of cargo. 01150 Segment group 22: MEA-EQN A group of segments to specify measurements applicable to a goods item. 01160 MEA, Measurements A segment to specify measurements, other than dimensions, applicable to a goods item. 01170 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 01180 Segment group 23: DIM-EQN A group of segments to specify dimensions applicable to a goods item. 01190 DIM, Dimensions To specify dimensions applicable to a goods item. 01200 EQN, Number of units A segment to specify the number of equipment units to each of which the given dimension applies. 01210 Segment group 24: RFF-DTM A group of segments to identify references to a goods item. 01220 RFF, Reference A segment to identify a reference to a goods item. 01230 DTM, Date/time/period A segment to indicate date and time relating to the reference. 01240 Segment group 25: PCI-RFF-DTM-GIN A group of segments to specify marks and numbers of a goods item. 01250 PCI, Package identification A segment to specify marks and numbers of a goods item. 01260 RFF, Reference A segment to identify a reference relating to the marks and numbers. 01270 DTM, Date/time/period A segment to identify date and time of the reference. 01280 GIN, Goods identity number To specify identity numbers related to transport units such as batch numbers or serial numbers. 01290 Segment group 26: DOC-DTM A group of segments to specify documents and associated date(s) and time(s) for a goods item. 01300 DOC, Document/message details A segment to specify a document prepared for a goods item. 01310 DTM, Date/time/period A segment to associate date and time with the prepared document. 01320 Segment group 27: GOR-DTM-LOC-SEL-FTX-SG28 A group of segments to identify Customs and other governmental procedures and required documents relating to the goods item. 01330 GOR, Governmental requirements A segment to indicate applicable governmental procedures related to import, export and transport of the goods item. 01340 DTM, Date/time/period A segment to indicate date and time relating to documents and/or Customs- and/or governmental procedures for the goods item. 01350 LOC, Place/location identification A segment to specify locations associated with Customs- and/or governmental procedures. 01360 SEL, Seal number A segment to identify seals and seal issuer associated with the Customs procedure and/or Customs document for the goods item. 01370 FTX, Free text A segment to provide additional governmental requirements information for the goods item. 01380 Segment group 28: DOC-DTM A group of segments to specify required documents by government for the goods item. 01390 DOC, Document/message details A segment to identify a document required by government. 01400 DTM, Date/time/period A segment to specify the date/time related to the required document. 01410 Segment group 29: TPL-SG30 A group of segments to identify transport details and associated measurements for a goods item. This group may be repeated to indicate the different phases of the movement. 01420 TPL, Transport placement A segment to identify transport details for a goods item. 01430 Segment group 30: MEA-EQN A group of segments to identify measurements. 01440 MEA, Measurements A segment to specify the distribution of a goods item among the transport details. 01450 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 01460 Segment group 31: SGP-SG32 A group of segments to specify the distribution of a goods item among the transport equipment. 01470 SGP, Split goods placement A segment to identify the equipment in which goods are transported. 01480 Segment group 32: MEA-EQN A group of segments to identify measurements. 01490 MEA, Measurements A segment to specify measurements of that portion of the goods item in the equipment. 01500 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 01510 Segment group 33: TCC-CUX-PRI-EQN-PCD-MOA-QTY-LOC A group of segments to specify charge associated with the goods item. 01520 TCC, Charge/rate calculations A segment to specify charge associated with the goods item. 01530 CUX, Currencies A segment to specify currencies associated with charge. 01540 PRI, Price details A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram). 01550 EQN, Number of units A segment to specify the number of units to which the unit price basis applies. 01560 PCD, Percentage details A segment to indicate the applicable reduction or surcharge percentage details. 01570 MOA, Monetary amount A segment to specify a monetary amount, such as prepaid amount, discount or total amount. 01580 QTY, Quantity A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 01590 LOC, Place/location identification A segment to indicate location where a specific function will be performed. 01600 Segment group 34: DGS-FTX-SG35-SG36-SG37 A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes. 01610 DGS, Dangerous goods A segment to indicate the class of dangerous goods, packing group, etc. 01620 FTX, Free text A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information. 01630 Segment group 35: CTA-COM A group of segments to identify a contact to whom communication regarding the dangerous goods can be directed. 01640 CTA, Contact information A segment to identify a person or department. 01650 COM, Communication contact A segment to identify a communication number of a person or department. 01660 Segment group 36: MEA-EQN A group of segments to identify dangerous goods measurements. 01670 MEA, Measurements A segment to specify measurements of the dangerous goods. 01680 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 01690 Segment group 37: SGP-SG38 A group of segments to specify the distribution of the dangerous goods among the transport equipment. 01700 SGP, Split goods placement A segment to identify the equipment in which the dangerous goods are transported. 01710 Segment group 38: MEA-EQN A group of segments to identify dangerous goods measurements. 01720 MEA, Measurements A segment to specify measurements of that portion of the dangerous goods in the equipment. 01730 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 01740 Segment group 39: EQD-EQN-TMD-MEA-DIM-SEL-TPL-HAN-TMP-FTX-RFF-SG40- SG41-SG43-SG44 A group of segments to specify equipment in which goods are transported. 01750 EQD, Equipment details A segment to specify equipment, and equipment size and type used in the transport. 01760 EQN, Number of units A segment to specify number of pieces of equipment required. 01770 TMD, Transport movement details A segment to specify transport movement details for the equipment. 01780 MEA, Measurements A segment to specify measurements, other than dimensions, associated with the equipment, such as weight. 01790 DIM, Dimensions A segment to specify dimensions applicable to equipment. 01800 SEL, Seal number A segment to identify seal and seal issuer associated with the equipment. 01810 TPL, Transport placement A segment to identify transport details for the equipment. 01820 HAN, Handling instructions A segment to specify handling instructions for specified equipment. 01830 TMP, Temperature A segment to indicate a temperature setting for the equipment. 01840 FTX, Free text A segment to specify processable supplementary information associated with the equipment. 01850 RFF, Reference A segment to specify a reference number to equipment. 01860 Segment group 40: TCC-CUX-PRI-EQN-PCD-MOA-QTY A group of segments to specify charges associated with the equipment. 01870 TCC, Charge/rate calculations A segment to specify a charge associated with the equipment. 01880 CUX, Currencies A segment to specify currency details related to the freight charge. 01890 PRI, Price details A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram). 01900 EQN, Number of units A segment to specify the number of units to which the unit price basis applies. 01910 PCD, Percentage details A segment to indicate the applicable reduction or surcharge percentage details. 01920 MOA, Monetary amount A segment to specify a monetary amount, such as prepaid amount, discount or total amount. 01930 QTY, Quantity A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 01940 Segment group 41: NAD-DTM-SG42 A group of segments to identify different equipment pick-up or drop-off places. 01950 NAD, Name and address A segment to specify a pick-up or drop-off address. 01960 DTM, Date/time/period A segment to indicate date and time relating to pick-up or drop-off. 01970 Segment group 42: CTA-COM A group of segments to identify a contact and its communications related to the party. 01980 CTA, Contact information A segment to specify a contact name associated with a specified equipment positioning or collection address. 01990 COM, Communication contact A segment to specify a communication number related to the contact. 02000 Segment group 43: EQA-EQN A group of segments to specify the attached equipment and related number of pieces. 02010 EQA, Attached equipment A segment to identify attached or related equipment such as a chassis attached to a container. 02020 EQN, Number of units A segment to specify number of pieces of equipment required. 02030 Segment group 44: DGS-FTX-SG45 A group of segments to specify dangerous goods. 02040 DGS, Dangerous goods A segment to indicate the dangerous goods regulations which apply, the class of the dangerous goods, additional dangerous goods codes, the United Nations Dangerous Goods (UNDG) number and the shipment flash point. 02050 FTX, Free text A segment to specify supplementary details regarding the dangerous goods such as dangerous goods technical name and other additional information. 02060 Segment group 45: CTA-COM A group of segments to specify contact information. 02070 CTA, Contact information A segment to identify a person or department to be contacted regarding dangerous goods. 02080 COM, Communication contact A segment to specify communication details of the dangerous goods contact. 02090 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) BGM Beginning of message CED Computer environment details CNT Control total COM Communication contact CPI Charge payment instructions CTA Contact information CUX Currencies DGS Dangerous goods DIM Dimensions DOC Document/message details DTM Date/time/period EFI External file link identification EQA Attached equipment EQD Equipment details EQN Number of units FTX Free text GDS Nature of cargo GID Goods item details GIN Goods identity number GOR Governmental requirements HAN Handling instructions LOC Place/location identification MEA Measurements MOA Monetary amount NAD Name and address PCD Percentage details PCI Package identification PIA Additional product id PRI Price details QTY Quantity RFF Reference RNG Range details SCC Scheduling conditions SEL Seal number SGP Split goods placement TCC Charge/rate calculations TDT Transport information TMD Transport movement details TMP Temperature TOD Terms of delivery or transport TPL Transport placement TSR Transport service requirements UNH Message header UNT Message trailer
4.3 Message structure 4.3.1 Segment table Pos Tag Name S R 00010 UNH Message header M 1 00020 BGM Beginning of message M 1 00030 CTA Contact information C 1 00040 COM Communication contact C 9 00050 DTM Date/time/period C 9 00060 TSR Transport service requirements C 9 00070 CUX Currencies C 9 00080 MOA Monetary amount C 99 00090 FTX Free text C 99 00100 CNT Control total C 9 00110 DOC Document/message details C 9 00120 GDS Nature of cargo C 9 00130 ---- Segment group 1 ------------------ C 99---------------+ 00140 LOC Place/location identification M 1 | 00150 DTM Date/time/period C 9----------------+ 00160 ---- Segment group 2 ------------------ C 2----------------+ 00170 TOD Terms of delivery or transport M 1 | 00180 LOC Place/location identification C 9----------------+ 00190 ---- Segment group 3 ------------------ C 999--------------+ 00200 RFF Reference M 1 | 00210 DTM Date/time/period C 9----------------+ 00220 ---- Segment group 4 ------------------ C 9----------------+ 00230 GOR Governmental requirements M 1 | 00240 DTM Date/time/period C 9 | 00250 LOC Place/location identification C 9 | 00260 SEL Seal number C 9 | 00270 FTX Free text C 9 | | 00280 ---- Segment group 5 ------------------ C 9---------------+| 00290 DOC Document/message details M 1 || 00300 DTM Date/time/period C 1---------------++ 00310 ---- Segment group 6 ------------------ C 9----------------+ 00320 CPI Charge payment instructions M 1 | 00330 RFF Reference C 99 | 00340 CUX Currencies C 1 | 00350 LOC Place/location identification C 9 | 00360 MOA Monetary amount C 9----------------+ 00370 ---- Segment group 7 ------------------ C 99---------------+ 00380 TCC Charge/rate calculations M 1 | 00390 LOC Place/location identification C 1 | 00400 FTX Free text C 1 | 00410 CUX Currencies C 1 | 00420 PRI Price details C 1 | 00430 EQN Number of units C 1 | 00440 PCD Percentage details C 1 | 00450 MOA Monetary amount C 9 | 00460 QTY Quantity C 9----------------+ 00470 ---- Segment group 8 ------------------ C 99---------------+ 00480 TDT Transport information M 1 | 00490 DTM Date/time/period C 9 | | 00500 ---- Segment group 9 ------------------ C 9---------------+| 00510 TSR Transport service requirements M 1 || 00520 SCC Scheduling conditions C 9---------------+| | 00530 ---- Segment group 10 ------------------ C 99--------------+| 00540 LOC Place/location identification M 1 || 00550 DTM Date/time/period C 9---------------+| | 00560 ---- Segment group 11 ------------------ C 9---------------+| 00570 RFF Reference M 1 || 00580 DTM Date/time/period C 1---------------++ 00590 ---- Segment group 12 ------------------ M 99---------------+ 00600 NAD Name and address M 1 | 00610 LOC Place/location identification C 9 | 00620 MOA Monetary amount C 9 | | 00630 ---- Segment group 13 ------------------ C 9---------------+| 00640 CTA Contact information M 1 || 00650 COM Communication contact C 9---------------+| | 00660 ---- Segment group 14 ------------------ C 9---------------+| 00670 DOC Document/message details M 1 || 00680 DTM Date/time/period C 1---------------+| | 00690 ---- Segment group 15 ------------------ C 99--------------+| 00700 TCC Charge/rate calculations M 1 || 00710 CUX Currencies C 1 || 00720 PRI Price details C 1 || 00730 EQN Number of units C 1 || 00740 PCD Percentage details C 1 || 00750 MOA Monetary amount C 9 || 00760 QTY Quantity C 9---------------+| | 00770 ---- Segment group 16 ------------------ C 9---------------+| 00780 RFF Reference M 1 || 00790 DTM Date/time/period C 9---------------+| | 00800 ---- Segment group 17 ------------------ C 9---------------+| 00810 CPI Charge payment instructions M 1 || 00820 RFF Reference C 99 || 00830 CUX Currencies C 1 || 00840 LOC Place/location identification C 9 || 00850 MOA Monetary amount C 9---------------+| | 00860 ---- Segment group 18 ------------------ C 99--------------+| 00870 TSR Transport service requirements M 1 || 00880 RFF Reference C 1 || 00890 LOC Place/location identification C 1 || 00900 TPL Transport placement C 1 || 00910 FTX Free text C 9---------------++ 00920 ---- Segment group 19 ------------------ C 99---------------+ 00930 EFI External file link identification M 1 | 00940 CED Computer environment details C 99 | 00950 COM Communication contact C 9 | 00960 RFF Reference C 9 | 00970 DTM Date/time/period C 9 | 00980 QTY Quantity C 9----------------+ 00990 ---- Segment group 20 ------------------ C 99999------------+ 01000 GID Goods item details M 1 | 01010 HAN Handling instructions C 99 | 01020 TMP Temperature C 1 | 01030 RNG Range details C 1 | 01040 TMD Transport movement details C 1 | 01050 LOC Place/location identification C 9 | 01060 MOA Monetary amount C 9 | 01070 PIA Additional product id C 9 | 01080 FTX Free text C 99 | 01090 PCD Percentage details C 9 | | 01100 ---- Segment group 21 ------------------ C 9---------------+| 01110 NAD Name and address M 1 || 01120 DTM Date/time/period C 1 || 01130 LOC Place/location identification C 9---------------+| 01140 GDS Nature of cargo C 9 | | 01150 ---- Segment group 22 ------------------ C 99--------------+| 01160 MEA Measurements M 1 || 01170 EQN Number of units C 1---------------+| | 01180 ---- Segment group 23 ------------------ C 99--------------+| 01190 DIM Dimensions M 1 || 01200 EQN Number of units C 1---------------+| | 01210 ---- Segment group 24 ------------------ C 9---------------+| 01220 RFF Reference M 1 || 01230 DTM Date/time/period C 9---------------+| | 01240 ---- Segment group 25 ------------------ C 999-------------+| 01250 PCI Package identification M 1 || 01260 RFF Reference C 1 || 01270 DTM Date/time/period C 1 || 01280 GIN Goods identity number C 10--------------+| | 01290 ---- Segment group 26 ------------------ C 9---------------+| 01300 DOC Document/message details M 1 || 01310 DTM Date/time/period C 9---------------+| | 01320 ---- Segment group 27 ------------------ C 9---------------+| 01330 GOR Governmental requirements M 1 || 01340 DTM Date/time/period C 9 || 01350 LOC Place/location identification C 9 || 01360 SEL Seal number C 9 || 01370 FTX Free text C 9 || || 01380 ---- Segment group 28 ------------------ C 9--------------+|| 01390 DOC Document/message details M 1 ||| 01400 DTM Date/time/period C 1--------------++| | 01410 ---- Segment group 29 ------------------ C 9---------------+| 01420 TPL Transport placement M 1 || || 01430 ---- Segment group 30 ------------------ C 9--------------+|| 01440 MEA Measurements M 1 ||| 01450 EQN Number of units C 1--------------++| | 01460 ---- Segment group 31 ------------------ C 999-------------+| 01470 SGP Split goods placement M 1 || || 01480 ---- Segment group 32 ------------------ C 9--------------+|| 01490 MEA Measurements M 1 ||| 01500 EQN Number of units C 1--------------++| | 01510 ---- Segment group 33 ------------------ C 99--------------+| 01520 TCC Charge/rate calculations M 1 || 01530 CUX Currencies C 1 || 01540 PRI Price details C 1 || 01550 EQN Number of units C 1 || 01560 PCD Percentage details C 1 || 01570 MOA Monetary amount C 9 || 01580 QTY Quantity C 9 || 01590 LOC Place/location identification C 9---------------+| | 01600 ---- Segment group 34 ------------------ C 99--------------+| 01610 DGS Dangerous goods M 1 || 01620 FTX Free text C 99 || || 01630 ---- Segment group 35 ------------------ C 9--------------+|| 01640 CTA Contact information M 1 ||| 01650 COM Communication contact C 9--------------+|| || 01660 ---- Segment group 36 ------------------ C 9--------------+|| 01670 MEA Measurements M 1 ||| 01680 EQN Number of units C 1--------------+|| || 01690 ---- Segment group 37 ------------------ C 999------------+|| 01700 SGP Split goods placement M 1 ||| ||| 01710 ---- Segment group 38 ------------------ C 9-------------+||| 01720 MEA Measurements M 1 |||| 01730 EQN Number of units C 1-------------++++ 01740 ---- Segment group 39 ------------------ C 999--------------+ 01750 EQD Equipment details M 1 | 01760 EQN Number of units C 1 | 01770 TMD Transport movement details C 1 | 01780 MEA Measurements C 9 | 01790 DIM Dimensions C 9 | 01800 SEL Seal number C 99 | 01810 TPL Transport placement C 9 | 01820 HAN Handling instructions C 1 | 01830 TMP Temperature C 1 | 01840 FTX Free text C 9 | 01850 RFF Reference C 9 | | 01860 ---- Segment group 40 ------------------ C 99--------------+| 01870 TCC Charge/rate calculations M 1 || 01880 CUX Currencies C 1 || 01890 PRI Price details C 1 || 01900 EQN Number of units C 1 || 01910 PCD Percentage details C 1 || 01920 MOA Monetary amount C 9 || 01930 QTY Quantity C 9---------------+| | 01940 ---- Segment group 41 ------------------ C 9---------------+| 01950 NAD Name and address M 1 || 01960 DTM Date/time/period C 1 || || 01970 ---- Segment group 42 ------------------ C 9--------------+|| 01980 CTA Contact information M 1 ||| 01990 COM Communication contact C 9--------------++| | 02000 ---- Segment group 43 ------------------ C 99--------------+| 02010 EQA Attached equipment M 1 || 02020 EQN Number of units C 1---------------+| | 02030 ---- Segment group 44 ------------------ C 99--------------+| 02040 DGS Dangerous goods M 1 || 02050 FTX Free text C 9 || || 02060 ---- Segment group 45 ------------------ C 9--------------+|| 02070 CTA Contact information M 1 ||| 02080 COM Communication contact C 9--------------+++ 02090 UNT Message trailer M 1