United Nations Directories
for Electronic Data Interchange for
Administration, Commerce and Transport
UN/EDIFACT
| United Nations Directories for Electronic Data Interchange for Administration, Commerce and Transport UN/EDIFACT |
Message Type : COPARN Version : D Release : 13B Contr. Agency: UN Revision : 10 Date : 2014-02-19 SOURCE: TBG3 Transport CONTENTS Container announcement message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table --------------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction --------------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Container announcement message (COPARN) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE 1.1 Functional definition The message contains an order to release, to make available, to accept or to call down containers or to announce the impending arrival of containers. This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'. The order may pertain to cargo related containers (full container load and less than container load), the arrangement of empty containers prior to loading and after stripping, as well as the arrangements for leasing the empty containers (on-hire and off-hire of containers). 1.2 Field of application The Container announcement message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles Business area: Pre- and on-carriage transport of containers/equipment Sending functions include: Shipper, Freight forwarder, Shipping agent, Container freight station, Consignee Receiving functions include: Freight forwarder, Shipping agent, Container terminal, Inland terminal, Container depot, Container freight station, Container lessor In the context of the 'Guide to the scenario of EDIFACT container messages' (as referred to at the start of section 1) the following guidelines, rules and functionality apply to this Container announcement message: * The message contents can normally be uniquely identified by a combination of the following data elements: - ordering customer, coded (NAD) - ordering customer agent, coded (NAD) - container announcement reference number (being the container release order reference, acceptance order reference, disposition order reference) (RFF) - related container announcement reference (reference to container disposition order) (RFF) In case the COPARN is used as an empty container notice the identification is normally achieved by: - carrier agent, coded (shipping agent) (EQD/NAD) - carrier, coded (shipping line) (TDT) - carrier agent's reference number (EQD/RFF) In case the COPARN is used as an on-hire request or order the identification is normally achieved by: - message sender (NAD) - lessee's reference (RFF) - indication on-hire request or order (BGM) In case the Container announcement message is used as an off-hire request or notice the identification is normally achieved by: - message sender (NAD) - return reference (RFF) - indication off-hire request or notice (BGM) The ordering customer agent, coded is needed to supplement the unique identification only in the next situation: the agent acts on behalf of several ordering customers issuing the same range of reference numbers for each customer. E.g. the ship's agent acts on behalf of several shipping lines issuing for each shipping line the same range of numbers. * One shipping line, one seagoing vessel, one sea voyage number and one shipping agent can be specified on message top level. * An indicator for the transport status (i.e., export, import, transhipment or continental) can be completed on container level (EQD-segment). * One message may contain several containers identified by their prefix and number or several equipment guidelines for groups of (empty) containers. * If the container prefix and number is unknown (in the Empty container disposition order or Container release order), a supplementary container reference number (Container sequence number) is used to identify a container group in the message to be able to refer to this information of the container(s) in e.g. the Container release order or the Container gate-in/gate-out message. * In case of an Empty container disposition order several equipment guidelines can be specified in the message in order to load (empty) containers that cannot be identified by their full prefix and serial numbers. In case of a guideline a combination of size and type and/or a certain range of equipment serial numbers (container prefix and numbers) can be given for a group of one or several containers. * Inland transport details can be specified for each individual container or can be specified on message level (for all containers in the message); the two options must not be used simultaneously. * An inland transport charges reference or a sea booking reference can be specified either on message level (related to all containers in the message) or for each individual container; the two options must not be used simultaneously. * In case of an Empty container disposition order or a Call down order the place of positioning, related reference and date/time of positioning of the containers can be specified either on message level (related to all goods items in the message) or for each individual goods item (as the place where the goods item is to be stuffed or stripped); the two options must not be used simultaneously. In the latter case up to 10 places of positioning for each goods item to be stripped from or stuffed in the container(s) can be included in the message. * In case of an Acceptance order the date and time of positioning of the containers at the place of positioning can be specified for each individual container. * The final place of positioning can be included in case of routing via an inland terminal or several container freight stations (for stacking purposes). * For each container up to 3 communication addresses can be specified to which a copy of the Container gate-in/gate-out report message is to be sent. * For each container details can be specified such as container prefix and number, size/type, loading instructions, special instructions, seals, temperature, dangerous goods and off-dimensions details. * In case of export the port of discharge and a port of transhipment can be specified for each individual container. * A goods item may be detailed, such as number and type of packages, goods description, gross weight, dangerous goods information and special instruction. * Goods item information can be related to the corresponding containers by linking the goods item group (GID) to the container details group(s) (EQD) by means of the SGP-segment. * In case of export for each goods item up to 9 declarant's reference numbers can be given; in case of goods declaration (Customs) at the place of stuffing also 9 accompanying (Customs) documents can be given. * The return address (in case of an off-hire notice) can be given on message level or on container level, but not simultaneously. The region for the empty equipment return (in the request) can be given on message level. The reference at the return address or region of return can be given at the same level. The transport sub-working group (D4) has developed recommendations for a harmonised implementation of this message through its subgroup ITIGG (International Transport Implementation Guidelines Group). Users implementing the message are strongly advised to apply these recommendations, which may be obtained from the D4 secretariat. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. 00010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Container announcement message is COPARN. Note: Container announcement messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 COPARN 0052 D 0054 13B 0051 UN 00020 BGM, Beginning of message A segment to indicate the beginning of a message and to transmit identifying number and the further specification of the message type (in data element 1001: Document name code), such as Empty container disposition order, Release order, Pre-arrival notice, Acceptance order, Empty container notice, Call-down order, On-hire request, On-hire order, Off-hire request, Off-hire notice. 00030 TMD, Transport movement details A segment to specify the haulage arrangement for the containers in the message, such as carrier haulage or merchant haulage. 00040 DTM, Date/time/period A segment to indicate a date and time applying the message as a whole: - requested equipment positioning date and/or time - expected on-hire date and/or time - expected return period 00050 TSR, Transport service requirements A segment to identify whether arrangements for the inland transport are to be made, whether equipment guidelines are applicable, whether Customs clearance is to be arranged and pick-up/delivery instructions. 00060 FTX, Free text A segment to specify free form or processable supplementary information, such as: - change information - special instructions 00070 LOC, Place/location identification A segment to identify a location applying to the entire message: - region of availability - empty equipment return region 00080 Segment group 1: RFF-DTM A group of segments to specify a reference relating to the whole message, and its date and/or time. 00090 RFF, Reference A segment to express a reference which applies to the entire message, such as: - container announcement reference number - booking reference number - reference to previous message - lessee's reference - lessor's reference - lease contract reference - return reference (of the party returning on hire equipment) - collect reference (of party collecting specified leased equipment) - carrier's agent reference number 00100 DTM, Date/time/period A segment to indicate date and/or time related to the reference. 00110 Segment group 2: TDT-DTM-RFF-SG3 A group of segments to indicate details of the movement of containers by sea and by inland carriers, such as mode and means of transport, and locations. 00120 TDT, Transport information A segment to indicate information related to the main carriage stage of the transport (sea), such as voyage number or indication sea transport, vessel and carrier or liner. Information on related inland transport stage(s) can also be included, such as mode of inland transport, means of transport, and inland carrier, such as: - main-carriage transport (sea) - pre- or on-carriage transport - second pre- or on-carriage transport 00130 DTM, Date/time/period A segment to specify the date(s) and time(s) related to main carriage transport. The segment may also be used to specify date(s) and time(s) related to pre-/on-carriage transport or inland transport. 00140 RFF, Reference A segment to provide a reference for the liner service, such as: - conference - marketing organization - syndicate - vessel sharing agreement 00150 Segment group 3: LOC-DTM A segment group to indicate places and ports corresponding to a transport stage. 00160 LOC, Place/location identification A segment to specify a location associated with a transport stage such as final port or place of discharge or loading. 00170 DTM, Date/time/period A segment to specify date(s) and time(s) related to a location. 00180 Segment group 4: NAD-SG5-RFF-DTM A group of segments to identify a party and/or addresses and a related contact and references. 00190 NAD, Name and address A segment to identify the party's name and address, and function, and other addresses, such as: - ordering customer - ordering customer agent - message recipient - message sender - place of positioning - place of collection - final place of positioning - carrier agent (sea) - charges payer - place of acceptance name and address - invoicee - stripping address - return address - on hire party direct interchange - off hire party direct interchange - container survey agency 00200 Segment group 5: CTA-COM A group of segments to identify a contact and its communications related to the party. 00210 CTA, Contact information A segment to identify a person or department of a message sender and/or message recipient, such as: - information contact 00220 COM, Communication contact A segment to identify a communication number of a person or department to whom communication should be directed. 00230 RFF, Reference A segment to identify a reference used by a party or at an address, such as: - reference at place of collection - reference at place of positioning - related container announcement reference (reference to Container disposition order) - transport costs reference number - reference at stripping address - reference at return address - reference at place of acceptance 00240 DTM, Date/time/period A segment to indicate a date and time applying to the party, such as: - ultimate equipment positioning date/time - requested equipment positioning date/time 00250 Segment group 6: GID-HAN-FTX-RFF-PIA-SG7-MEA-DIM-SG8-SG9-SG10-SG12 A group of segments to describe the goods items (to be) stuffed in or (to be) stripped from the containers. 00260 GID, Goods item details A segment to identify a goods item (to be) stuffed in or (to be) stripped from the containers. A goods item can be identified by a goods item number. 00270 HAN, Handling instructions A segment to specify handling instructions relating to the goods item, such as: - hazardous cargo - off-dimensions - Customs clearance 00280 FTX, Free text A segment to describe the goods item or to provide special instructions. 00290 RFF, Reference A segment to identify a reference to a goods item in case of export, such as: - shipowner's authorization number - declarant's reference number 00300 PIA, Additional product id A segment to identify a commodity code. 00310 Segment group 7: NAD-DTM-RFF A group of segments to describe the address, reference and date/time for the stuffing or the stripping of the goods item in the containers. 00320 NAD, Name and address A segment to identify the address applicable to the particular goods item, such as: - place of positioning (as the stuffing or stripping address for the goods item) - Customs clearance place - place of acceptance name and address - stripping address 00330 DTM, Date/time/period A segment to indicate a date and time when the container is to be positioned, such as: - requested equipment positioning date/time - ultimate equipment positioning date/time 00340 RFF, Reference A segment to identify a reference used by a party or at an address, such as: - reference at place of positioning - reference at place of acceptance - reference at stripping address 00350 MEA, Measurements A segment to specify measurements, other than dimensions, applicable to a goods item, such as: - gross weight 00360 DIM, Dimensions A segment to specify dimensions applicable to a goods item, such as: - gross dimensions 00370 Segment group 8: DOC-DTM-LOC A group of segments to specify documents related to the goods item. 00380 DOC, Document/message details A segment to indicate a document related to the goods item. 00390 DTM, Date/time/period A segment to specify the date/time related to the document, such as: - document/message date/time - expiry date. 00400 LOC, Place/location identification A segment to identify a location related to the document, such as: - place of document issue 00410 Segment group 9: SGP-MEA A group of segments to specify the distribution of a goods item among the containers. 00420 SGP, Split goods placement A segment to identify a container in which goods are transported. 00430 MEA, Measurements A segment to specify the gross weight of that portion of the goods item in the container, such as: - gross weight - net net weight (dangerous goods) 00440 Segment group 10: DGS-FTX-MEA-SG11 A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes. 00450 DGS, Dangerous goods A segment to indicate the dangerous goods regulations for the corresponding mode of transport, class of dangerous goods, additional dangerous goods code, UN-number and shipment flash point. 00460 FTX, Free text A segment to specify supplementary details related to the dangerous goods, such as: - dangerous goods technical name - dangerous goods additional information 00470 MEA, Measurements A segment to specify measurements of the dangerous goods, such as: - net net weight 00480 Segment group 11: CTA-COM A segment group to specify contact information including communication details regarding the dangerous goods. 00490 CTA, Contact information A segment to identify a person or department to be contacted regarding the dangerous goods. 00500 COM, Communication contact A segment to specify communication details of the contact specified in the CTA segment. 00510 Segment group 12: TMP-RNG A segment group to identify transport related temperature settings. 00520 TMP, Temperature A segment to specify the type of transport related temperature such as storage, transport or operating temperature and also to optionally specify a single value temperature setting. 00530 RNG, Range details A segment to optionally specify the transport related temperature as a range of values. 00540 Segment group 13: EQD-RFF-EQN-TMD-DTM-TSR-LOC-MEA-DIM-SG14-SEL-FTX- PCD-SG15-MOA-GOR-EQA-COD-HAN-SG17-SG18-SG20 A group of segments to specify (groups of) containers (with guidelines) in which goods are transported or which are taken on- hire or off-hire. 00550 EQD, Equipment details A segment to specify a container, container size and type, and full/empty indication; also to specify the type of rail car on which a related container is transported. 00560 RFF, Reference A segment to express a reference which applies to the particular container, such as: - container sequence number - lower equipment serial number of range - upper equipment serial number of range - referring sequence number - reference at place of positioning - reference at place of collection - related container announcement reference (reference to Empty container disposition order) - transport costs reference number - carrier agent's reference number - freight forwarder's reference 00570 EQN, Number of units A segment to specify the number of containers of the same size and type in case of equipment guidelines. 00580 TMD, Transport movement details A segment to indicate a Full Container Load (FCL) or a Less than Full Container Load (LCL). 00590 DTM, Date/time/period A segment to indicate a date and time relating to the container, such as: - estimated positioning date/time - ultimate release date/time - expected on-hire date and/or time 00600 TSR, Transport service requirements A segment to specify special instructions and/or services regarding the container, such as: fork lift holes required, off- dimensions, ship's agent's counter by terminal, seals to be checked, damage to be inspected, Customs clearance. 00610 LOC, Place/location identification A segment to specify ports/locations associated with the sea transport of a container in case of export, such as: - place of discharge - transhipment place 00620 MEA, Measurements A segment to specify measurement, other than dimensions, associated with the container, such as: - tare weight - gross weight 00630 DIM, Dimensions - off-standard dimensions, general - off-standard dimensions, front - off-standard dimensions, rear - off-standard dimensions, right - off-standard dimensions, left - off-standard dimensions, height - external equipment dimensions - dimensions equipment door - net dimensions 00640 Segment group 14: TMP-RNG A segment group to identify transport related temperature settings 00650 TMP, Temperature A segment to specify the transport temperature setting of a container. 00660 RNG, Range details A segment to specify the transport temperature range or the pre-tripping range of a container. 00670 SEL, Seal number A segment to identify seal and seal issuer associated with the container, such as shipper, consolidator, carrier (sea) and Customs. 00680 FTX, Free text A segment to specify processable supplementary information associated with the container, such as: - loading instructions (seagoing vessel) - special instructions (related to inland transport) - container order information (conditions to be checked) - remarks 00690 PCD, Percentage details A segment to specify percentages related to the equipment such as percentage humidity. 00700 Segment group 15: DGS-FTX-MEA-SG16 A segment group to identify dangerous goods. 00710 DGS, Dangerous goods A segment to specify dangerous goods. 00720 FTX, Free text A segment to specify supplementary details regarding the dangerous goods such as the technical name of the dangerous goods etc. 00730 MEA, Measurements A segment to specify measurements of the dangerous goods, such as: - net net weight. 00740 Segment group 16: CTA-COM A segment group to specify contact information including communication details regarding the dangerous goods. 00750 CTA, Contact information A segment to identify a person or department to be contacted regarding the dangerous goods. 00760 COM, Communication contact A segment to specify communication details of the contact specified in the CTA segment. 00770 MOA, Monetary amount A segment to indicate a liability amount relating to the equipment. 00780 GOR, Governmental requirements A segment to indicate if governmental inspection is required. 00790 EQA, Attached equipment A segment to identify related container and means of transport details (rail), such as: - rail car (to relate to the 'rail-car'-qualified EQD-group) 00800 COD, Component details A segment to specify the details of the components of transport equipment. 00810 HAN, Handling instructions A segment to specify handling instructions related to the container equipment. 00820 Segment group 17: DAM-COD A group of segments to specify damage details related to the equipment. 00830 DAM, Damage A segment to specify equipment damages, such as the point of the damage on the equipment, and the type of damage. 00840 COD, Component details A segment to specify component details of the damaged equipment. 00850 Segment group 18: TDT-DTM-RFF-SG19 A group of segments to indicate information related to the pre- or on-carriage transport stage of the equipment. 00860 TDT, Transport information A segment to specify pre- or on-carriage transport details, such as: * pre- or on-carriage transport * second pre- or on-carriage transport 00870 DTM, Date/time/period A segment to specify the date(s) and time(s) related to the pre- or on-carriage transport. 00880 RFF, Reference A segment to specify an additional information related to transport details 00890 Segment group 19: LOC-DTM A segment group to specify ports and other locations associated with pre- or on-carriage transport. 00900 LOC, Place/location identification A segment to specify ports/locations associated with the pre- or on-carriage transport, such as: - place of departure - place of arrival 00910 DTM, Date/time/period A segment to specify date(s) and time(s) related to a location. 00920 Segment group 20: NAD-DTM-CTA-COM-RFF A group of segments to identify different parties/places, and related dates/times. 00930 NAD, Name and address A segment to specify a related address or party, such as: - charges payer - country/place of container stuffing - place of collection - final place of positioning - message to - next destination - release to party - carrier agent (sea) - return address 00940 DTM, Date/time/period A segment to indicate a date and time relating to the container, such as: - earliest equipment collection date/time 00950 CTA, Contact information A segment to identify a person or department for the specified party. 00960 COM, Communication contact A segment to identify the communication number on the EDI- network (e.g. mailbox number) to whom a copy of the Container gate-in/gate-out report message should be sent. 00970 RFF, Reference A segment to identify a reference used by a party or at an address: - reference at return address 00980 CNT, Control total A segment to specify the number of containers in the message, explicitly given by the sender. 00990 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) BGM Beginning of message CNT Control total COD Component details COM Communication contact CTA Contact information DAM Damage DGS Dangerous goods DIM Dimensions DOC Document/message details DTM Date/time/period EQA Attached equipment EQD Equipment details EQN Number of units FTX Free text GID Goods item details GOR Governmental requirements HAN Handling instructions LOC Place/location identification MEA Measurements MOA Monetary amount NAD Name and address PCD Percentage details PIA Additional product id RFF Reference RNG Range details SEL Seal number SGP Split goods placement TDT Transport information TMD Transport movement details TMP Temperature TSR Transport service requirements UNH Message header UNT Message trailer
4.3 Message structure 4.3.1 Segment table Pos Tag Name S R 00010 UNH Message header M 1 00020 BGM Beginning of message M 1 00030 TMD Transport movement details C 1 00040 DTM Date/time/period C 9 00050 TSR Transport service requirements C 9 00060 FTX Free text C 99 00070 LOC Place/location identification C 9 00080 ---- Segment group 1 ------------------ C 9----------------+ 00090 RFF Reference M 1 | 00100 DTM Date/time/period C 9----------------+ 00110 ---- Segment group 2 ------------------ C 9----------------+ 00120 TDT Transport information M 1 | 00130 DTM Date/time/period C 9 | 00140 RFF Reference C 9 | | 00150 ---- Segment group 3 ------------------ C 9---------------+| 00160 LOC Place/location identification M 1 || 00170 DTM Date/time/period C 9---------------++ 00180 ---- Segment group 4 ------------------ M 9----------------+ 00190 NAD Name and address M 1 | | 00200 ---- Segment group 5 ------------------ C 9---------------+| 00210 CTA Contact information M 1 || 00220 COM Communication contact C 9---------------+| 00230 RFF Reference C 9 | 00240 DTM Date/time/period C 9----------------+ 00250 ---- Segment group 6 ------------------ C 999--------------+ 00260 GID Goods item details M 1 | 00270 HAN Handling instructions C 9 | 00280 FTX Free text C 9 | 00290 RFF Reference C 9 | 00300 PIA Additional product id C 9 | | 00310 ---- Segment group 7 ------------------ C 99--------------+| 00320 NAD Name and address M 1 || 00330 DTM Date/time/period C 9 || 00340 RFF Reference C 9---------------+| 00350 MEA Measurements C 9 | 00360 DIM Dimensions C 9 | | 00370 ---- Segment group 8 ------------------ C 9---------------+| 00380 DOC Document/message details M 1 || 00390 DTM Date/time/period C 9 || 00400 LOC Place/location identification C 9---------------+| | 00410 ---- Segment group 9 ------------------ C 999-------------+| 00420 SGP Split goods placement M 1 || 00430 MEA Measurements C 9---------------+| | 00440 ---- Segment group 10 ------------------ C 99--------------+| 00450 DGS Dangerous goods M 1 || 00460 FTX Free text C 9 || 00470 MEA Measurements C 9 || || 00480 ---- Segment group 11 ------------------ C 9--------------+|| 00490 CTA Contact information M 1 ||| 00500 COM Communication contact C 9--------------++| | 00510 ---- Segment group 12 ------------------ C 9---------------+| 00520 TMP Temperature M 1 || 00530 RNG Range details C 1---------------++ 00540 ---- Segment group 13 ------------------ M 9999-------------+ 00550 EQD Equipment details M 1 | 00560 RFF Reference C 9 | 00570 EQN Number of units C 1 | 00580 TMD Transport movement details C 9 | 00590 DTM Date/time/period C 9 | 00600 TSR Transport service requirements C 9 | 00610 LOC Place/location identification C 9 | 00620 MEA Measurements C 9 | 00630 DIM Dimensions C 9 | | 00640 ---- Segment group 14 ------------------ C 9---------------+| 00650 TMP Temperature M 1 || 00660 RNG Range details C 1---------------+| 00670 SEL Seal number C 9 | 00680 FTX Free text C 9 | 00690 PCD Percentage details C 9 | | 00700 ---- Segment group 15 ------------------ C 99--------------+| 00710 DGS Dangerous goods M 1 || 00720 FTX Free text C 9 || 00730 MEA Measurements C 9 || || 00740 ---- Segment group 16 ------------------ C 9--------------+|| 00750 CTA Contact information M 1 ||| 00760 COM Communication contact C 9--------------++| 00770 MOA Monetary amount C 9 | 00780 GOR Governmental requirements C 9 | 00790 EQA Attached equipment C 1 | 00800 COD Component details C 1 | 00810 HAN Handling instructions C 9 | | 00820 ---- Segment group 17 ------------------ C 9---------------+| 00830 DAM Damage M 1 || 00840 COD Component details C 1---------------+| | 00850 ---- Segment group 18 ------------------ C 9---------------+| 00860 TDT Transport information M 1 || 00870 DTM Date/time/period C 9 || 00880 RFF Reference C 9 || || 00890 ---- Segment group 19 ------------------ C 9--------------+|| 00900 LOC Place/location identification M 1 ||| 00910 DTM Date/time/period C 9--------------++| | 00920 ---- Segment group 20 ------------------ C 9---------------+| 00930 NAD Name and address M 1 || 00940 DTM Date/time/period C 1 || 00950 CTA Contact information C 1 || 00960 COM Communication contact C 1 || 00970 RFF Reference C 9---------------++ 00980 CNT Control total C 1 00990 UNT Message trailer M 1