United Nations Directories
for Electronic Data Interchange for
Administration, Commerce and Transport
UN/EDIFACT
| United Nations Directories for Electronic Data Interchange for Administration, Commerce and Transport UN/EDIFACT |
Message Type : COEDOR Version : D Release : 16B Contr. Agency: UN Revision : 10 Date : 2016-10-28 SOURCE: TBG3 Transport CONTENTS Transport equipment stock and profile report message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table --------------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction --------------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Transport equipment stock and profile report message (COEDOR) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE 1.1 Functional definition A message to report transport equipment that is either in stock by the sending party (i.e. a terminal, depot or container freight station) or is part of the fleet of transport equipment being operated by a shipping line. It is also used to report the profiles of newly acquired transport equipment. This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers and other transport equipment by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called 'Guide to the scenario of EDIFACT container messages'. 1.2 Field of application The Transport equipment stock and profile report message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles Business area: Pre- and on-carriage transport of transport equipment. Sending functions include: Container terminal (seaside), inland terminal (landside), container freight station, container depot, container repair facility, shipping line or shipping line agent. Receiving functions include: Shipping line or shipping line agent, tonnage centre, logistics centre, freight forwarder, container terminal, inland terminal, container freight station, container depot. In the context of the 'Guide to the scenario of EDIFACT messages' (as referred to at the start of section 1) the following guidelines, rules and functionality apply to this Transport equipment stock and profile report message: * The message contents of the Transport equipment stock report can be uniquely identified by a combination of the following data elements: - message sender, coded (NAD) - stock check date/time (DTM) The Transport equipment profile report can be identified by the following data element: - message sender, coded (NAD) A combination of the following data elements can be used to relate the business data contained in the Container acceptance order: - ordering customer coded (NAD) - ordering customer agent, coded (NAD) * One message may contain several containers identified by their prefix and serial number. * For each container its stack position can be given, including the date and time of its checking by the stock reporter, and the date/time on which the container was delivered at the stock keeper's place. * Also the transport status (= export, import, transhipment or continental), full/empty indication and the condition (damage) of the container can be specified. * Depending on the transport status of the container additional information on the container can be given, such as carrier agent's reference, (seagoing) vessel, (sea) voyage number/indication and port of discharge. * Goods item details cannot be completed. The transport sub-working group (D4) has developed recommendations for a harmonised implementation of this message through its subgroup ITIGG (International Transport Implementation Guidelines Group). Users implementing the message are strongly advised to apply these recommendations, which may be obtained from the D4 secretariat. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. 00010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Transport equipment stock and profile report message is COEDOR. Note: Transport equipment stock and profile report messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 COEDOR 0052 D 0054 16B 0051 UN 00020 BGM, Beginning of message A segment to indicate the beginning of a message and to transmit the identifying number. 00030 DTM, Date/time/period A segment to indicate the date and time on which the particular container has been ascertained as being in stock (stock check date/time). 00040 FTX, Free text A segment to specify free form or processable supplementary information, such as: - change information 00050 Segment group 1: RFF-DTM A group of segments to specify a reference relating to the whole message, and its date and/or time. 00060 RFF, Reference A segment to express a reference which applies to the entire message, such as: - reference to previous message 00070 DTM, Date/time/period A segment to indicate date and/or time related to the reference. 00080 Segment group 2: NAD-SG3 A group of segments to identify a party and/or addresses and related contacts. 00090 NAD, Name and address A segment to identify the party's name and address, and function, such as: - message recipient - message sender - ordering customer - ordering customer agent 00100 Segment group 3: CTA-COM A group of segments to identify a contact and its communications related to the party. 00110 CTA, Contact information A segment to identify a person or department of a message sender and/or message recipient, such as: - information contact 00120 COM, Communication contact A segment to identify a communication number of a person or department to whom communication should be directed. 00130 Segment group 4: EQD-RFF-DTM-LOC-COD-MEA-DIM-RNG-FTX-EQA-HAN-NAD- EQN-SG5-SG6-SG8-SG10 A group of segments to specify containers in stock of the sending party, including relevant details by individual container number or grouped and total by type and size. 00140 EQD, Equipment details A segment to specify the prefix and number of the container, its status and a full/empty indication. 00150 RFF, Reference A segment to express a reference which applies to the particular container, such as: - container announcement reference number - acceptance order reference 00160 DTM, Date/time/period A segment to indicate the date and time on which the particular container has been ascertained as being in stock (stock check date/time), and to indicate when the container has been delivered at the stock keeper (actual equipment positioning date/time). 00170 LOC, Place/location identification A segment to indicate a port/place according to the corresponding container, such as: - stack position 00180 COD, Component details A segment to specify the details of the components of transport equipment. 00190 MEA, Measurements A segment to specify measurements, other than dimensions, associated with the transport equipment, such as: - tare weight - maximum payload - maximum capacity 00200 DIM, Dimensions A segment to specify external dimensions of non-ISO (International Standards Organization) equipment. 00210 RNG, Range details A segment to provide an equipment number range when transmitting a Transport equipment profile report. 00220 FTX, Free text A segment to provide processable supplementary information associated with the equipment, such as special equipment usage. 00230 EQA, Attached equipment A segment to identify attached or related transport equipment. 00240 HAN, Handling instructions A segment to specify handling instructions related to the container equipment. 00250 NAD, Name and address A segment to identify name and address, and function, such as: - equipment owner - equipment operator - equipment manufacturer. 00260 EQN, Number of units To specify the number of units of a particular type and size of equipment. 00270 Segment group 5: DAM-COD A group of segments to specify damage details related to the equipment. 00280 DAM, Damage A segment to specify equipment damages, such as the point of the damage on the equipment, and the type of damage. 00290 COD, Component details A segment to specify component details of the damaged equipment. 00300 Segment group 6: TDT-RFF-SG7 A group of segments to specify transport details related to the container. 00310 TDT, Transport information A segment to indicate information about sea transport related to the container (main carriage transport), such as voyage number/indication sea transport, vessel and carrier/liner service. 00320 RFF, Reference A segment to specify an additional reference related to transport details. 00330 Segment group 7: LOC-DTM A group of segments to specify locations related to the main carriage of the container equipment. 00340 LOC, Place/location identification A segment to specify a location related to the main carriage of the container such as port of discharge. 00350 DTM, Date/time/period A segment to specify date(s) and time(s) related to a location. 00360 Segment group 8: DGS-FTX-MEA-SG9 A segment group to identify dangerous goods. 00370 DGS, Dangerous goods A segment to specify dangerous goods. 00380 FTX, Free text A segment to specify supplementary details regarding the dangerous goods such as the technical name of the dangerous goods etc. 00390 MEA, Measurements A segment to specify measurements of the dangerous goods, such as: - net net weight. 00400 Segment group 9: CTA-COM A segment group to specify contact information including communication details regarding the dangerous goods. 00410 CTA, Contact information A segment to identify a person or department to be contacted regarding the dangerous goods. 00420 COM, Communication contact A segment to specify communication details of the contact specified in the CTA segment. 00430 Segment group 10: TMP-RNG A segment group to identify transport related temperature settings. 00440 TMP, Temperature A segment to specify the type of transport related temperature such as storage, transport or operating temperature and also to optionally specify a single value temperature setting. 00450 RNG, Range details A segment to optionally specify the transport related temperature such as a range of values. 00460 CNT, Control total A segment to specify the number of containers in the message, explicitly given by the sender. 00470 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) BGM Beginning of message CNT Control total COD Component details COM Communication contact CTA Contact information DAM Damage DGS Dangerous goods DIM Dimensions DTM Date/time/period EQA Attached equipment EQD Equipment details EQN Number of units FTX Free text HAN Handling instructions LOC Place/location identification MEA Measurements NAD Name and address RFF Reference RNG Range details TDT Transport information TMP Temperature UNH Message header UNT Message trailer
4.3 Message structure 4.3.1 Segment table Pos Tag Name S R 00010 UNH Message header M 1 00020 BGM Beginning of message M 1 00030 DTM Date/time/period M 1 00040 FTX Free text C 9 00050 ---- Segment group 1 ------------------ C 9----------------+ 00060 RFF Reference M 1 | 00070 DTM Date/time/period C 9----------------+ 00080 ---- Segment group 2 ------------------ M 9----------------+ 00090 NAD Name and address M 1 | | 00100 ---- Segment group 3 ------------------ C 9---------------+| 00110 CTA Contact information M 1 || 00120 COM Communication contact C 9---------------++ 00130 ---- Segment group 4 ------------------ M 999999-----------+ 00140 EQD Equipment details M 1 | 00150 RFF Reference C 9 | 00160 DTM Date/time/period C 9 | 00170 LOC Place/location identification C 9 | 00180 COD Component details C 1 | 00190 MEA Measurements C 9 | 00200 DIM Dimensions C 9 | 00210 RNG Range details C 9 | 00220 FTX Free text C 9 | 00230 EQA Attached equipment C 9 | 00240 HAN Handling instructions C 9 | 00250 NAD Name and address C 9 | 00260 EQN Number of units C 1 | | 00270 ---- Segment group 5 ------------------ C 9---------------+| 00280 DAM Damage M 1 || 00290 COD Component details C 1---------------+| | 00300 ---- Segment group 6 ------------------ C 1---------------+| 00310 TDT Transport information M 1 || 00320 RFF Reference C 9 || || 00330 ---- Segment group 7 ------------------ C 9--------------+|| 00340 LOC Place/location identification M 1 ||| 00350 DTM Date/time/period C 9--------------++| | 00360 ---- Segment group 8 ------------------ C 99--------------+| 00370 DGS Dangerous goods M 1 || 00380 FTX Free text C 9 || 00390 MEA Measurements C 9 || || 00400 ---- Segment group 9 ------------------ C 9--------------+|| 00410 CTA Contact information M 1 ||| 00420 COM Communication contact C 9--------------++| | 00430 ---- Segment group 10 ------------------ C 9---------------+| 00440 TMP Temperature M 1 || 00450 RNG Range details C 1---------------++ 00460 CNT Control total C 1 00470 UNT Message trailer M 1