United Nations Directories
for Electronic Data Interchange for
Administration, Commerce and Transport



 UN/EDIFACT

Message Type : IFTDGN Version : D Release : 16B Contr. Agency: UN Revision : 8 Date : 2016-10-28 SOURCE: TBG3 Transport CONTENTS Dangerous goods notification message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table --------------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction --------------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Dangerous goods notification message (IFTDGN) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE 1.1 Functional definition The International Forwarding and Transport Dangerous Goods Notification message is a message from the party responsible to declare the dangerous goods (e.g. carrier's agent, freight forwarder) to the party acting on behalf of the local authority performing the checks on conformance with the legal requirements on the control of dangerous goods, normally Port Authority, conveying the information relating to one conveyance/voyage of a means of transport such as a vessel, train, truck or barge, on the dangerous goods being loaded, unloaded, and/or in transit. 1.2 Field of application The Dangerous goods notification message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles This message is meant to comply with the legal requirements of authorities concerning the notification/declaration of dangerous goods. 1- One message relates to one conveyance/voyage of a means of transport. Remark: the message structure is aligned with the IFCSUM message (Forwarding and consolidation summary message). 2- One message is to be suitable to declare both the dangerous goods to be discharged and loaded and the dangerous goods that remain on board (in transit). Only one handling operation per IFTDGN message can be reported, or a handling operation can be specified per consignment in IFTDGN. 3- One message may relate to all dangerous goods information that the sender of the message is responsible for or to a certain part of that information; the information may be split in different messages, e.g. as it known at different times or the discharging information is sent separately from loading information or the information is split up in different messages for the different dangerous goods classes. 4- One message is to be based on the local legal information requirements regarding the notification of dangerous goods to the (port) authority. N.B. This may mean that in a certain port the condition for a data element (or qualifier) that is conditional according to this specification, is that the data element (or qualifier) becomes mandatory for that port. 5- A dangerous goods notification message may contain several consignments. 6- A consignment may contain several goods items/dangerous goods classes. 7- Each goods item can only contain one dangerous goods class. A goods item reflects the operational description of the goods. 8- A dangerous goods class may be transported in one or more equipment, and a single equipment may contain one or more dangerous goods classes. 9- The message has to cater for the provision of sending updates (change, deletion or cancellation). Remark: To cover all dangerous goods information relating to one conveyance/voyage of a means of transport might imply accumulation of several Dangerous Goods Notification messages from the same or several agents/forwarders. The Dangerous Goods Acknowledgement message is a message from the party acting on behalf of the local authority to the party responsible to declare the dangerous goods. Agent Port Authority ------- Dangerous Goods Notification ------> <------ Dangerous Goods Acknowledgement ------- The transport sub-working group (D4) has developed recommendations for a harmonised implementation of this message through its subgroup ITIGG (International Transport Implementation Guidelines Group). Users implementing the message are strongly advised to apply these recommendations, which may be obtained from the D4 secretariat. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. 00010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Dangerous goods notification message is IFTDGN. Note: Dangerous goods notification messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 IFTDGN 0052 D 0054 16B 0051 UN 00020 BGM, Beginning of message A segment to indicate the beginning of the message by identifying the message by a document/message number. It is recommended to sequentially number the messages relating to the same conveyance/voyage of the means of transport. Update (change or replace) messages can be accommodated using Message function code together with the Reference to previous message (in RFF segment) quoting the document/message number of the message being updated by this message. 00030 DTM, Date/time/period A segment to indicate a date and time applying to the whole message, such as date and time of document/message issue. 00040 FTX, Free text A segment to give information on the changes in the message in case of changes to previously sent message. The text subject to be qualified: - Change information 00050 HAN, Handling instructions A segment to report a handling operation to be taken on the hazardous cargo. (Some ports oblige the agents to report only one handling operation of hazardous cargo per IFTDGN message). 00060 Segment group 1: RFF-DTM A group of segments to specify a reference relating to the whole message and its date and time. 00070 RFF, Reference A segment to express a reference which applies to the entire message. The reference to be qualified: - Carrier's agent reference number - Freight forwarders reference number - Reference to previous message 00080 DTM, Date/time/period A segment to indicate date and time relating to the reference. 00090 Segment group 2: TDT-DTM-RFF-SG3 A group of segments to indicate the details of the movement of goods such as means of transport, locations, arrival date/times. The following conditions apply: 1 This group should be completed when the IFTDGN relates to a seagoing vessel. 2 This group is not necessarily used when the IFTDGN does not relate to a seagoing vessel. 00100 TDT, Transport information A segment to indicate the transport information related to the visit of a means of transport in the port. The transport details to be specified: - Main transport 00110 DTM, Date/time/period A segment to indicate date(s) and time(s) related to the transport stage. 00120 RFF, Reference A segment to indicate the transport licence reference number(s) of the main transport. 00130 Segment group 3: LOC-DTM A segment group to specify locations related to the arrival of the means of transport. 00140 LOC, Place/location identification A segment to indicate locations related to the arrival of the means of transport including port of discharge, port of origin as well as berths. 00150 DTM, Date/time/period A segment to specify estimated date(s) and time(s) of arrival at, and departure from the location. 00160 Segment group 4: NAD-SG5 A group of segments to identify a party relevant to the entire message, and its related contacts. 00170 NAD, Name and address A segment to identify a party's name, address and function relevant to the entire message. The functions to be qualified: - Carrier - either Carrier's agent or Freight forwarder Remark: the place of this segment group in the message is derived from the single consignment based (IFTMxx) messages (and not the IFCSUM message). e.g.: Message recipient, Message sender, Acknowledgement recipient, Notify party (in case of calamity). 00180 Segment group 5: CTA-COM A group of segments identifying a contact and its communications related to the party, e.g. to whom an acknowledgement is to be sent or who is to be contacted in case of a calamity. 00190 CTA, Contact information A segment to identify a person or department within a party. 00200 COM, Communication contact A segment to identify a communication number of a person or department to whom communication should be directed, e.g. e- mail number, telefax number, telephone number. 00210 Segment group 6: EQD-MEA-SEL A group of segments to specify the equipment in which the dangerous cargo is transported. 00220 EQD, Equipment details A segment to specify the equipment identification and the equipment size and type of the equipment used in the transport. The equipment to be qualified: - Barge, lighter - Container - Trailer 00230 MEA, Measurements A segment to specify measurements, other than dimensions, associated with the equipment. The measurement to be qualified: - Maximum payload (of the barge) 00240 SEL, Seal number A segment to identify the seal(s) and seal issuer associated with the equipment. 00250 Segment group 7: CNI-HAN-DTM-LOC-SG8-SG10-SG12 A group of segments to describe a consignment of dangerous goods carried or to be carried on the means of transport specified before. 00260 CNI, Consignment information A segment to identify the consignment and to indicate whether the consignment is to be loaded, discharged or in transit. 00270 HAN, Handling instructions A segment to report a handling operation to be taken on the hazardous cargo of the consignment. Some ports allow to report one handling operation of hazardous cargo per consignment in the IFTDGN message. 00280 DTM, Date/time/period A segment to indicate time and date of the load or discharge operation. The date/time to be qualified: - Date/time of operation - Estimated date/time of arrival - Estimated date/time of departure 00290 LOC, Place/location identification A segment to indicate locations related to the arrival of a consignment. The location to be qualified: - place/port of loading - place/port of discharge - berth (as the place where the discharge/load/in transit action is to take place) - warehouse (as the place where the consignment will be stored) 00300 Segment group 8: TDT-RFF-SG9 A group of segments to specify transport details of the consignment. 00310 TDT, Transport information A segment to indicate the transport information related to the arrival (pre-carriage) or the departure (on-carriage) of the consignment. The transport details to be specified: - Pre-carriage - On-carriage 00320 RFF, Reference A segment to indicate the transport licence number(s) of the pre- or on- carriage transport. 00330 Segment group 9: LOC-DTM A group of segments to specify the location and associated date(s) and time(s) related to the arrival and departure of the consignment. 00340 LOC, Place/location identification A segment to specify a location related to the pre- carriage and on-carriage of the consignment. 00350 DTM, Date/time/period A segment to specify the date(s) and time(s) related to the arrival and departure of the consignment. 00360 Segment group 10: NAD-SG11-RFF A group of segments to identify a party related to the consignment. 00370 NAD, Name and address A segment to identify a party's name and address relevant to the consignment. The function to be qualified: - Consignor - either Carrier's agent or Freight forwarder 00380 Segment group 11: CTA-COM A group of segments to identify a contact and its communications related to the party. 00390 CTA, Contact information A segment to identify a person or a department within the party. 00400 COM, Communication contact A segment to identify a communication number of the contact to whom communication should be directed. 00410 RFF, Reference A segment to express a reference for the consignment related to the party. The reference to be qualified: - Carrier's agent reference number - Freight forwarders reference number 00420 Segment group 12: GID-FTX-PCI-SG13-SG14 A group of segments to specify a goods item within the consignment. 00430 GID, Goods item details A segment to identify a goods item within the consignment and to indicate the heading of a goods item with the number of packages. 00440 FTX, Free text A segment to specify processable supplementary information relating to the goods item. The text subject to be qualified: - Description of goods - Remarks 00450 PCI, Package identification A segment to specify marks and numbers of the goods item. 00460 Segment group 13: SGP-MEA A group of segments to specify the distribution of a goods item among the transport equipment. 00470 SGP, Split goods placement A segment to identify the equipment (such as barge identification) in which the goods are transported. 00480 MEA, Measurements A segment to specify measurements of that portion of the goods item in the equipment. 00490 Segment group 14: DGS-FTX-MEA-LOC-RFF-SG15 A group of segments to specify the dangerous goods details of the goods item. A goods item can be classified by only one dangerous goods class. 00500 DGS, Dangerous goods A segment to indicate the dangerous goods regulation information, e.g. IMO code, UNDG number, dangerous goods class, packing group. 00510 FTX, Free text A segment to specify processable supplementary information relating to the dangerous goods. The text subject to be qualified (each qualifier may occur only once): - Dangerous goods technical name - Dangerous goods additional information 00520 MEA, Measurements A segment to specify a measurement of the dangerous part of the goods item. The measurement to be qualified: - Net weight - Gross weight 00530 LOC, Place/location identification A segment to indicate the cell location on board of the means of transport. 00540 RFF, Reference A segment by which the declaring party can refer to (a) number(s) of approval concerning exceptions on the existing hazardous goods regulation, obtained from the responsible authority. 00550 Segment group 15: SGP-LOC-MEA A group of segments to specify the distribution of the dangerous goods among transport equipment. 00560 SGP, Split goods placement A segment to identify the equipment (such as container number, barge identification, trailer identification) in which the dangerous goods is placed and the number of packages in that equipment. 00570 LOC, Place/location identification A segment to indicate the cell location on board of the means of transport, for each equipment in which dangerous cargo is stored. 00580 MEA, Measurements A segment to specify a measurement of a placement in the equipment. The transport measurements to be qualified include: - Net weight - Gross weight 00590 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) BGM Beginning of message CNI Consignment information COM Communication contact CTA Contact information DGS Dangerous goods DTM Date/time/period EQD Equipment details FTX Free text GID Goods item details HAN Handling instructions LOC Place/location identification MEA Measurements NAD Name and address PCI Package identification RFF Reference SEL Seal number SGP Split goods placement TDT Transport information UNH Message header UNT Message trailer

4.3 Message structure 4.3.1 Segment table Pos Tag Name S R 00010 UNH Message header M 1 00020 BGM Beginning of message M 1 00030 DTM Date/time/period C 9 00040 FTX Free text C 9 00050 HAN Handling instructions C 1 00060 ---- Segment group 1 ------------------ C 9----------------+ 00070 RFF Reference M 1 | 00080 DTM Date/time/period C 9----------------+ 00090 ---- Segment group 2 ------------------ C 1----------------+ 00100 TDT Transport information M 1 | 00110 DTM Date/time/period C 9 | 00120 RFF Reference C 9 | | 00130 ---- Segment group 3 ------------------ C 99--------------+| 00140 LOC Place/location identification M 1 || 00150 DTM Date/time/period C 9---------------++ 00160 ---- Segment group 4 ------------------ C 9----------------+ 00170 NAD Name and address M 1 | | 00180 ---- Segment group 5 ------------------ C 9---------------+| 00190 CTA Contact information M 1 || 00200 COM Communication contact C 9---------------++ 00210 ---- Segment group 6 ------------------ C 999--------------+ 00220 EQD Equipment details M 1 | 00230 MEA Measurements C 9 | 00240 SEL Seal number C 99---------------+ 00250 ---- Segment group 7 ------------------ M 999--------------+ 00260 CNI Consignment information M 1 | 00270 HAN Handling instructions C 1 | 00280 DTM Date/time/period C 4 | 00290 LOC Place/location identification C 4 | | 00300 ---- Segment group 8 ------------------ C 1---------------+| 00310 TDT Transport information M 1 || 00320 RFF Reference C 9 || || 00330 ---- Segment group 9 ------------------ C 9--------------+|| 00340 LOC Place/location identification M 1 ||| 00350 DTM Date/time/period C 9--------------++| | 00360 ---- Segment group 10 ------------------ C 2---------------+| 00370 NAD Name and address M 1 || || 00380 ---- Segment group 11 ------------------ C 1--------------+|| 00390 CTA Contact information M 1 ||| 00400 COM Communication contact C 1--------------+|| 00410 RFF Reference C 1---------------+| | 00420 ---- Segment group 12 ------------------ M 99--------------+| 00430 GID Goods item details M 1 || 00440 FTX Free text C 2 || 00450 PCI Package identification C 1 || || 00460 ---- Segment group 13 ------------------ C 99-------------+|| 00470 SGP Split goods placement M 1 ||| 00480 MEA Measurements C 9--------------+|| || 00490 ---- Segment group 14 ------------------ M 1--------------+|| 00500 DGS Dangerous goods M 1 ||| 00510 FTX Free text M 9 ||| 00520 MEA Measurements M 9 ||| 00530 LOC Place/location identification C 99 ||| 00540 RFF Reference C 9 ||| ||| 00550 ---- Segment group 15 ------------------ C 99------------+||| 00560 SGP Split goods placement M 1 |||| 00570 LOC Place/location identification C 1 |||| 00580 MEA Measurements C 9-------------++++ 00590 UNT Message trailer M 1

Copyright United Nations, all rights reserved
 
UN Economic Commission for Europe
Palais des Nations, CH-1211 Geneva 10, Switzerland
Tel: +41-22 917 1366 Fax: +41-22 917 0037 E-mail: TradeMaster@unece.org
 
UN/EDIFACT Directories