United Nations Directories
for Electronic Data Interchange for
Administration, Commerce and Transport
UN/EDIFACT
| United Nations Directories for Electronic Data Interchange for Administration, Commerce and Transport UN/EDIFACT |
Message Type : QALITY Version : D Release : 16B Contr. Agency: UN Revision : 5 Date : 2016-10-28 SOURCE: TBG1 Supply Chain CONTENTS Quality data message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.1.1 Header section 4.1.2 Detail section 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table --------------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction --------------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Quality data message (QALITY) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE 1.1 Functional definition A message to enable the transmission of the results of tests performed to satisfy a specified product or process requirement. The content includes, but is not limited to, test data and measurements, statistical information, and the testing methods employed. 1.2 Field of application The Quality data message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles - A Quality Data Message detail line may refer to either goods items or services. - The values within a Quality Data Message may refer to: . a product/service, . a product via batch references, . process type information of a product. - A Quality Data Message may contain discrete or statistical values as well as product specification values. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. The following guidelines and principles apply to the whole message and are intended to facilitate the understanding and implementation of the message: All specified dates/times should be in the format 'ccyymmdd'/'hhmm' unless all parties involved in the transaction agree that there is a functional requirement for an alternative format. Periods should be specified as whole numbers representing the required period as indicated in the format qualifier (weeks, months, etc.) Where a choice of code or text is given only the code element should be used wherever possible. Conditional data that is not required in the message should not be included. Care must be taken that the segment qualifier in dependent segments do not conflict with the segment qualifier of the trigger segment of a group. Free text information within the message should be avoided as this inhibits automatic processing. 4.1.1 Header section Information to be provided in the Header section: 00010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Quality data message is QALITY. Note: Quality data messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 QALITY 0052 D 0054 16B 0051 UN 00020 BGM, Beginning of message A segment by which the sender uniquely identifies the Quality Data Message by means of its type and number. 00030 DTM, Date/time/period A segment specifying general dates and, when relevant, times related to the whole message. The segment must be specified at least once to identify the quality data message date. Example of the use of this DTM-segment is : date/time frame of reported data that apply to the whole quality data message. The Date/time/period segment within other segment groups should be used whenever the date/time/period requires to be logically related to another specified data item; e.g. date of measurement must be specified within the measurement segment group. 00040 IMD, Item description A segment for describing the product involved. 00050 MEA, Measurements A segment to allow physical measurements and dimensions to be stated, where this is required for identification of the product. 00060 FTX, Free text A segment with free text information, in coded or clear form, to give further clarification, when required, to the whole message. In computer to computer exchanges such text will normally require the receiver to handle this segment manually. 00070 Segment group 1: RFF-DTM A segment group for referencing documents and where necessary, their dates, relating to the whole message, e.g. purchase order, shipment/consignment number. 00080 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 00090 DTM, Date/time/period A segment specifying the date/time of the referenced document. 00100 Segment group 2: NAD-LOC-SG3-SG4 A group of segments identifying the parties relevant to the whole Quality Data Message, with associated information. 00110 NAD, Name and address A segment identifying names and addresses of parties, in coded or clear form, and their function relevant for the whole Quality Data Message. Identification of the Sender and Receiver party is mandatory for the Quality Data Message. They are to be given in the NAD segment. 00120 LOC, Place/location identification A segment indicating more details regarding specific locations related to the party specified in the NAD- segment, e.g. internal site/building number. 00130 Segment group 3: RFF-DTM A segment group giving references and where necessary, date information only relevant to the specified party. 00140 RFF, Reference A segment identifying the reference by its number and where appropriate a line number within a document. 00150 DTM, Date/time/period A segment specifying the date/time of the reference. 00160 Segment group 4: CTA-COM A group of segments giving contact details of the specific person or department within the party identified in the NAD segment. 00170 CTA, Contact information A segment to identify a person or department, and their function, to whom communications should be directed. 00180 COM, Communication contact A segment to identify a communication type and number for the contact specified in the CTA segment. 4.1.2 Detail section Information to be provided in the Detail section: 00190 Segment group 5: LIN-PIA-IMD-MEA-PSD-SPS-DTM-QTY-FTX-SG6-SG7-SG10- SG12-SG20-SG30 A group of segments providing the relevant quality data for the specified product. 00200 LIN, Line item A segment identifying the line item by its number and additionally, identifying the product involved by a product identification number. Other product identification numbers are specified in the following PIA segment, e.g. Customer part number, etc. 00210 PIA, Additional product id A segment providing additional product identification to that specified in the LIN segment, e.g. Buyer part number. 00220 IMD, Item description A segment for describing the product involved. This segment should be used for products that cannot be identified by a product code or article number. 00230 MEA, Measurements A segment to allow physical measurements and dimensions to be stated, where this is required for identification of the product. 00240 PSD, Physical sample description A segment to define the physical sample parameters, associated with a test, resulting in discrete measurements. If used in this position, the values apply to all following values of product properties. 00250 SPS, Sampling parameters for summary statistics A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values apply to all following values of product properties. 00260 DTM, Date/time/period A segment specifying date/time/period details to the line item only. 00270 QTY, Quantity A segment to enable quantity information to be specified. 00280 FTX, Free text A segment with free text in coded or clear form, to give further clarification, when required, for the line item. In computer to computer exchanges such text will normally require the receiver to handle this segment manually. 00290 Segment group 6: RFF-DTM A segment group for referencing documents relating to the line item and where necessary, their dates. 00300 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 00310 DTM, Date/time/period A segment specifying the date/time of the referenced document. 00320 Segment group 7: NAD-LOC-SG8-SG9 A group of segments identifying the parties with associated information, relevant to the line item only. 00330 NAD, Name and address A segment identifying names and addresses of parties, in coded or clear form, and their function relevant for the line item. 00340 LOC, Place/location identification A segment indicating more details regarding specific locations related to the party specified in the NAD- segment, e.g. internal site/building number. 00350 Segment group 8: RFF-DTM A segment group giving references and where necessary, date information only relevant to the specified party. 00360 RFF, Reference A segment identifying the reference by its number and where appropriate a line number within a document. 00370 DTM, Date/time/period A segment specifying the date and/or time of the reference. 00380 Segment group 9: CTA-COM A group of segments giving contact details of the specific person or department within the party identified in the NAD segment. 00390 CTA, Contact information A segment to identify a person or department, and their function, to whom communications should be directed. 00400 COM, Communication contact A segment to identify a communication type and number for the contact specified in the CTA segment. 00410 Segment group 10: TEM-MEA-DTM-SG11 A group of segments to provide details of the test methods, employed including any circumstances, test devices, references and dates. 00420 TEM, Test method A segment to describe the nature of the test performed. 00430 MEA, Measurements A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed. 00440 DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time. 00450 Segment group 11: RFF-DTM A segment group of referencing documents relating to the test method and where necessary, their dates, e.g. device number. 00460 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 00470 DTM, Date/time/period A segment specifying the date/time of the referenced document. 00480 Segment group 12: CCI-PSD-SPS-DTM-FTX-SG13-SG14-SG16-SG18 A group of segments to be used to define a class of properties, the individual properties within that class and the related data (e.g. discrete values, statistical information, test methods). When this segment group is used, the data is directly related to the product specified. 00490 CCI, Characteristic/class id To specify the general class and/or the individual properties on which the Quality Data is being reported. Note: within the CCI-segment Class type code (7059) or Measured attribute code (6313) or Characteristic description code (7037) must be present. If Class type code (7059) AND Measured attribute code (6313) are present, then Characteristic description code (7037) is not allowed. If only Class type code is used within the CCI-segment, then the individual properties must be specified within the related STA/MEA-segments. The data element Characteristic description (7036) should only be used to enhance the meaning of the code value (e.g. if no specific code available and code value ZZ (mutually defined) is used then Description can be used to further describe the Product Characteristics. NB: The Class identification element in this segment is only used to specify the product characteristic class, e.g. Chemistry or Physical Dimensions. 00500 PSD, Physical sample description A segment to define the physical sample parameters associated with a test resulting in discrete measurements. If used in this position, the values only apply to data within the same analysis group. 00510 SPS, Sampling parameters for summary statistics A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values only apply to data within the same analysis group. 00520 DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. date/time, test performed. 00530 FTX, Free text A segment with free text information to give further clarification within Segment group 12: the Analysis Group. 00540 Segment group 13: RFF-DTM A segment group of referencing documents relating to the Analysis Section and where necessary, their dates, e.g. Purchase order, shipment note. 00550 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 00560 DTM, Date/time/period A segment specifying the date/time of the referenced document. 00570 Segment group 14: MEA-DTM-SG15 A group of segments to allow measurement values or specification values to be specified along with their associated references and dates. The data element Measurement purpose code qualifier (6311) indicates the type of the values. 00580 MEA, Measurements A segment to specify discrete values, other measurement results or specification values. These values may be specified as a range and may be qualified by the significance and/or the attribute codes. 00590 DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time. 00600 Segment group 15: RFF-DTM A Segment group of referencing documents relating to the specifications and values and where necessary, their dates. 00610 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 00620 DTM, Date/time/period A segment specifying the date/time of the referenced document. 00630 Segment group 16: STA-DTM-SG17 A group of segments to provide the necessary information for summary statistics with any related references and dates. 00640 STA, Statistics A segment to specify the values required for statistics including codes to define the type of statistics and the measure unit employed. 00650 DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. time frame of statistical period. 00660 Segment group 17: RFF-DTM A Segment group of referencing documents relating to the statistics and where necessary, their dates. 00670 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 00680 DTM, Date/time/period A segment specifying the date/time of the referenced document. 00690 Segment group 18: TEM-MEA-DTM-SG19 A group of segments to provide details of the test methods, employed including any circumstances, test devices, references and dates. 00700 TEM, Test method A segment to describe the nature of the test performed. 00710 MEA, Measurements A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed. 00720 DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier. 00730 Segment group 19: RFF-DTM A Segment group of referencing documents relating to the test method and where necessary, their dates. 00740 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 00750 DTM, Date/time/period A segment specifying the date/time of the referenced document. 00760 Segment group 20: GIN-DTM-SG21-SG22 A group of segments to enable batch related information to be specified. 00770 GIN, Goods identity number A segment providing specific serial or batch numbers, relating to the specified product. These may be single numbers or ranges of numbers. 00780 DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. batch process date. 00790 Segment group 21: RFF-DTM A Segment group of referencing documents relating to the batch and where necessary, their dates. 00800 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 00810 DTM, Date/time/period A segment specifying the date/time of the referenced document. 00820 Segment group 22: CCI-PSD-SPS-DTM-FTX-SG23-SG24-SG26-SG28 A group of segments to be used to define a class of properties, the individual properties within that class and the related data (e.g. discrete values, statistical information, test methods). When this segment group is used, the data is directly related to the product specified. 00830 CCI, Characteristic/class id To specify the general class and/or the individual properties on which the Quality Data is being reported. Note: within the CCI-segment Class type code (7059) or Measured attribute code (6313) or Characteristic description code (7037) must be present. If Class type code (7059) AND Measured attribute code (6313) are present, then Characteristic description code (7037) is not allowed. If only Class type code is used within the CCI-segment, then the individual properties must be specified within the related STA/MEA-segments. The Characteristic description (data element 7036) should only be used to enhance the meaning of the code value. If no specific code available, use code value ZZ (mutually defined) in DE 7037 and use DE 7036 to describe the Product Characteristics. NB: The Class identification element in this segment is only used to specify the product characteristic class, e.g. Chemistry or Physical Dimensions. 00840 PSD, Physical sample description A segment to define the physical sample parameters associated with a test resulting in discrete measurements. If used in this position, the values only apply to data within the same analysis group. 00850 SPS, Sampling parameters for summary statistics A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values only apply to data within the same analysis group. 00860 DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. date/time, test performed. 00870 FTX, Free text A segment with free text information to give further clarification. 00880 Segment group 23: RFF-DTM A segment group of referencing documents relating to the Analysis section and where necessary, their dates, e.g. Purchase order, shipment note. 00890 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 00900 DTM, Date/time/period A segment specifying the date/time of the referenced document. 00910 Segment group 24: MEA-DTM-SG25 A group of segments to allow measurement values or specification values to be specified along with their associated references and dates. The data element Measurement purpose code qualifier (6311) indicates the type of the values. 00920 MEA, Measurements A segment to specify discrete values, other measurement results or specification values. These values may be specified as a range and may be qualified by the significance and/or the attribute codes. 00930 DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time. 00940 Segment group 25: RFF-DTM A Segment group of referencing documents relating to the specifications and values and where necessary, their dates. 00950 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 00960 DTM, Date/time/period A segment specifying the date/time of the referenced document. 00970 Segment group 26: STA-DTM-SG27 A group of segments to provide the necessary information for summary statistics with any related references and dates. 00980 STA, Statistics A segment to specify the values required for statistics including codes to define the type of statistics and the measure unit employed. 00990 DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. time frame of statistical period. 01000 Segment group 27: RFF-DTM A Segment group of referencing documents relating to the statistics and where necessary, their dates. 01010 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 01020 DTM, Date/time/period A segment specifying the date/time of the referenced document. 01030 Segment group 28: TEM-MEA-DTM-SG29 A group of segments to provide details of the test methods, employed including any circumstances, test devices, references and dates. 01040 TEM, Test method A segment to describe the nature of the test performed. 01050 MEA, Measurements A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed. 01060 DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier. 01070 Segment group 29: RFF-DTM A Segment group of referencing documents relating to the test method and where necessary, their dates. 01080 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 01090 DTM, Date/time/period A segment specifying the date/time of the referenced document. 01100 Segment group 30: PRC-SG31-SG32 A group of segments to allow process related quality data to be specified. 01110 PRC, Process identification A segment to specify the process/sub-process type and description to which the data is related. 01120 Segment group 31: NAD-LOC A group of segments identifying Names, Addresses and Locations relevant to the process. 01130 NAD, Name and address A segment identifying names and addresses of parties, in coded or clear form, and their function relevant for the process. 01140 LOC, Place/location identification A segment indicating more details regarding specific locations related to the party specified in the NAD- segment, e.g. internal site/building number. 01150 Segment group 32: CCI-PSD-SPS-DTM-FTX-SG33-SG34-SG36-SG38 A group of segments to be used to define a class of properties, the individual properties within that class and the related data (e.g. discrete values, statistical information, test methods). When this segment group is used, the data is directly related to the product specified. 01160 CCI, Characteristic/class id To specify the general class and/or the individual properties on which the Quality Data is being reported. Note: within the CCI-segment Class type code (7059) or Measured attribute code (6313) or Characteristic description code (7037) must be present. If Class type code (7059) AND Measured attribute code (6313) are present, then Characteristic description code (7037) is not allowed. If only Class type code is used within the CCI-segment, then the individual properties must be specified within the related STA/MEA-segments. The data element Characteristic description (7036) should only be used to enhance the meaning of the code value (e.g. if no specific code available and code value ZZ (mutually defined) is used then Description can be used to further describe the Product Characteristics. NB: The Class identification element in this segment is only used to specify the product characteristic class, e.g. Chemistry or Physical Dimensions. 01170 PSD, Physical sample description A segment to define the physical sample parameters associated with a test resulting in discrete measurements. If used in this position, the values only apply to data within the same analysis group. 01180 SPS, Sampling parameters for summary statistics A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values only apply to data within the same analysis group. 01190 DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. date/time, test performed. 01200 FTX, Free text A segment with free text information to give further clarification within Segment group 32: the Analysis Group. 01210 Segment group 33: RFF-DTM A segment group of referencing documents relating to the Analysis Section and where necessary, their dates, e.g. Purchase order, shipment note. 01220 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 01230 DTM, Date/time/period A segment specifying the date/time of the referenced document. 01240 Segment group 34: MEA-DTM-SG35 A group of segments to allow measurement values or specification values to be specified along with their associated references and dates. The data element Measurement purpose code qualifier (6311) indicates the type of the values. 01250 MEA, Measurements A segment to specify discrete values, other measurement results or specification values. These values may be specified as a range and may be qualified by the significance and/or the attribute codes. 01260 DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time. 01270 Segment group 35: RFF-DTM A Segment group of referencing documents relating to the specifications and values and where necessary, their dates. 01280 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 01290 DTM, Date/time/period A segment specifying the date/time of the referenced document. 01300 Segment group 36: STA-DTM-SG37 A group of segments to provide the necessary information for summary statistics with any related references and dates. 01310 STA, Statistics A segment to specify the values required for statistics including codes to define the type of statistics and the measure unit employed. 01320 DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. time frame of statistical period. 01330 Segment group 37: RFF-DTM A Segment group of referencing documents relating to the statistics and where necessary, their dates. 01340 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 01350 DTM, Date/time/period A segment specifying the date/time of the referenced document. 01360 Segment group 38: TEM-MEA-DTM-SG39 A group of segments to provide details of the test methods, employed including any circumstances, test devices, references and dates. 01370 TEM, Test method A segment to describe the nature of the test performed. 01380 MEA, Measurements A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed. 01390 DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier. 01400 Segment group 39: RFF-DTM A Segment group of referencing documents relating to the test method and where necessary, their dates. 01410 RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 01420 DTM, Date/time/period A segment specifying the date/time of the referenced document. 01430 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) BGM Beginning of message CCI Characteristic/class id COM Communication contact CTA Contact information DTM Date/time/period FTX Free text GIN Goods identity number IMD Item description LIN Line item LOC Place/location identification MEA Measurements NAD Name and address PIA Additional product id PRC Process identification PSD Physical sample description QTY Quantity RFF Reference SPS Sampling parameters for summary statistics STA Statistics TEM Test method UNH Message header UNT Message trailer
4.3 Message structure 4.3.1 Segment table Pos Tag Name S R HEADER SECTION 00010 UNH Message header M 1 00020 BGM Beginning of message M 1 00030 DTM Date/time/period M 10 00040 IMD Item description C 10 00050 MEA Measurements C 10 00060 FTX Free text C 5 00070 ---- Segment group 1 ------------------ C 10---------------+ 00080 RFF Reference M 1 | 00090 DTM Date/time/period C 2----------------+ 00100 ---- Segment group 2 ------------------ C 10---------------+ 00110 NAD Name and address M 1 | 00120 LOC Place/location identification C 5 | | 00130 ---- Segment group 3 ------------------ C 10--------------+| 00140 RFF Reference M 1 || 00150 DTM Date/time/period C 2---------------+| | 00160 ---- Segment group 4 ------------------ C 5---------------+| 00170 CTA Contact information M 1 || 00180 COM Communication contact C 5---------------++ DETAIL SECTION 00190 ---- Segment group 5 ------------------ C 200--------------+ 00200 LIN Line item M 1 | 00210 PIA Additional product id C 10 | 00220 IMD Item description C 10 | 00230 MEA Measurements C 10 | 00240 PSD Physical sample description C 1 | 00250 SPS Sampling parameters for summary | statistics C 1 | 00260 DTM Date/time/period C 10 | 00270 QTY Quantity C 99 | 00280 FTX Free text C 5 | | 00290 ---- Segment group 6 ------------------ C 10--------------+| 00300 RFF Reference M 1 || 00310 DTM Date/time/period C 2---------------+| | 00320 ---- Segment group 7 ------------------ C 10--------------+| 00330 NAD Name and address M 1 || 00340 LOC Place/location identification C 5 || || 00350 ---- Segment group 8 ------------------ C 10-------------+|| 00360 RFF Reference M 1 ||| 00370 DTM Date/time/period C 2--------------+|| || 00380 ---- Segment group 9 ------------------ C 5--------------+|| 00390 CTA Contact information M 1 ||| 00400 COM Communication contact C 5--------------++| | 00410 ---- Segment group 10 ------------------ C 100-------------+| 00420 TEM Test method M 1 || 00430 MEA Measurements C 100 || 00440 DTM Date/time/period C 10 || || 00450 ---- Segment group 11 ------------------ C 10-------------+|| 00460 RFF Reference M 1 ||| 00470 DTM Date/time/period C 2--------------++| | 00480 ---- Segment group 12 ------------------ C 200-------------+| 00490 CCI Characteristic/class id M 1 || 00500 PSD Physical sample description C 10 || 00510 SPS Sampling parameters for summary || statistics C 10 || 00520 DTM Date/time/period C 10 || 00530 FTX Free text C 10 || || 00540 ---- Segment group 13 ------------------ C 10-------------+|| 00550 RFF Reference M 1 ||| 00560 DTM Date/time/period C 2--------------+|| || 00570 ---- Segment group 14 ------------------ C 999------------+|| 00580 MEA Measurements M 1 ||| 00590 DTM Date/time/period C 10 ||| ||| 00600 ---- Segment group 15 ------------------ C 10------------+||| 00610 RFF Reference M 1 |||| 00620 DTM Date/time/period C 2-------------++|| || 00630 ---- Segment group 16 ------------------ C 100------------+|| 00640 STA Statistics M 1 ||| 00650 DTM Date/time/period C 10 ||| ||| 00660 ---- Segment group 17 ------------------ C 10------------+||| 00670 RFF Reference M 1 |||| 00680 DTM Date/time/period C 2-------------++|| || 00690 ---- Segment group 18 ------------------ C 100------------+|| 00700 TEM Test method M 1 ||| 00710 MEA Measurements C 100 ||| 00720 DTM Date/time/period C 10 ||| ||| 00730 ---- Segment group 19 ------------------ C 10------------+||| 00740 RFF Reference M 1 |||| 00750 DTM Date/time/period C 2-------------+++| | 00760 ---- Segment group 20 ------------------ C 100-------------+| 00770 GIN Goods identity number M 1 || 00780 DTM Date/time/period C 10 || || 00790 ---- Segment group 21 ------------------ C 10-------------+|| 00800 RFF Reference M 1 ||| 00810 DTM Date/time/period C 2--------------+|| || 00820 ---- Segment group 22 ------------------ C 200------------+|| 00830 CCI Characteristic/class id M 1 ||| 00840 PSD Physical sample description C 10 ||| 00850 SPS Sampling parameters for summary ||| statistics C 10 ||| 00860 DTM Date/time/period C 10 ||| 00870 FTX Free text C 10 ||| ||| 00880 ---- Segment group 23 ------------------ C 10------------+||| 00890 RFF Reference M 1 |||| 00900 DTM Date/time/period C 2-------------+||| ||| 00910 ---- Segment group 24 ------------------ C 999-----------+||| 00920 MEA Measurements M 1 |||| 00930 DTM Date/time/period C 10 |||| |||| 00940 ---- Segment group 25 ------------------ C 10-----------+|||| 00950 RFF Reference M 1 ||||| 00960 DTM Date/time/period C 2------------++||| ||| 00970 ---- Segment group 26 ------------------ C 100-----------+||| 00980 STA Statistics M 1 |||| 00990 DTM Date/time/period C 10 |||| |||| 01000 ---- Segment group 27 ------------------ C 10-----------+|||| 01010 RFF Reference M 1 ||||| 01020 DTM Date/time/period C 2------------++||| ||| 01030 ---- Segment group 28 ------------------ C 100-----------+||| 01040 TEM Test method M 1 |||| 01050 MEA Measurements C 100 |||| 01060 DTM Date/time/period C 10 |||| |||| 01070 ---- Segment group 29 ------------------ C 10-----------+|||| 01080 RFF Reference M 1 ||||| 01090 DTM Date/time/period C 2------------++++| | 01100 ---- Segment group 30 ------------------ C 100-------------+| 01110 PRC Process identification M 1 || || 01120 ---- Segment group 31 ------------------ C 10-------------+|| 01130 NAD Name and address M 1 ||| 01140 LOC Place/location identification C 5--------------+|| || 01150 ---- Segment group 32 ------------------ C 200------------+|| 01160 CCI Characteristic/class id M 1 ||| 01170 PSD Physical sample description C 10 ||| 01180 SPS Sampling parameters for summary ||| statistics C 10 ||| 01190 DTM Date/time/period C 10 ||| 01200 FTX Free text C 10 ||| ||| 01210 ---- Segment group 33 ------------------ C 10------------+||| 01220 RFF Reference M 1 |||| 01230 DTM Date/time/period C 2-------------+||| ||| 01240 ---- Segment group 34 ------------------ C 999-----------+||| 01250 MEA Measurements M 1 |||| 01260 DTM Date/time/period C 10 |||| |||| 01270 ---- Segment group 35 ------------------ C 10-----------+|||| 01280 RFF Reference M 1 ||||| 01290 DTM Date/time/period C 2------------++||| ||| 01300 ---- Segment group 36 ------------------ C 100-----------+||| 01310 STA Statistics M 1 |||| 01320 DTM Date/time/period C 10 |||| |||| 01330 ---- Segment group 37 ------------------ C 10-----------+|||| 01340 RFF Reference M 1 ||||| 01350 DTM Date/time/period C 2------------++||| ||| 01360 ---- Segment group 38 ------------------ C 100-----------+||| 01370 TEM Test method M 1 |||| 01380 MEA Measurements C 100 |||| 01390 DTM Date/time/period C 10 |||| |||| 01400 ---- Segment group 39 ------------------ C 10-----------+|||| 01410 RFF Reference M 1 ||||| 01420 DTM Date/time/period C 2------------+++++ 01430 UNT Message trailer M 1