United Nations Directories
for Electronic Data Interchange for
Administration, Commerce and Transport
UN/EDIFACT
| United Nations Directories for Electronic Data Interchange for Administration, Commerce and Transport UN/EDIFACT |
Message Type : INSDES Version : D Release : 17B Contr. Agency: UN Revision : 3 Date : 2017-10-19 SOURCE: TBG1 Supply Chain CONTENTS Instruction to despatch message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.1.1 Header section 4.1.2 Detail section 4.1.3 Summary section 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table --------------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction --------------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Instruction to despatch message (INSDES) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE 1.1 Functional definition A message from a party to another party who has control over ordered goods, providing instructions to put on hold or to despatch a consignment according to conditions specified in the message. 1.2 Field of application The Instruction to despatch message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles Depending on circumstances the Instruction to Despatch message may be sent either from a buyer to a supplier (see point 1.3.1 below), or from a supplier or buyer to a third party service provider (see point 1.3.2 below). The Instruction to Despatch message may be used to; - request the delivery of goods being held by a third party (e.g., warehouse, logistic service provider) on behalf of a buyer or supplier. - request the delivery of goods being held by the supplier until the buyer is in a position to receive them. For example, when ordering equipment for a new building the purchase order for the equipment will be issued before the start of physical building. As the building progresses equipment will be requested for delivery, for installation before the next phase of building starts, e.g., the heating system. - identify the exact delivery location; - identify the date on which delivery should take place; - etc. The Instruction to Despatch message must not be used to; - change information previously agreed on an order, e.g., price, ordered quantities, etc. The Purchase Order Change message must be used for this purpose. - order transport services for the despatch of the goods identified in the message. The message Transport Instruction must be used for this purpose. 1.3.1 Buyer to Supplier The Instruction to Despatch message may be used by a buyer to inform his seller to release the despatch of goods previously ordered. In addition the message may be used to instruct the seller to hold the despatch of goods which have been previously reported as being ready for despatch. 1.3.2 Buyer or Supplier to Third Party Service Provider. When the message is sent from a supplier or a buyer to a third party service provider it may be used to request the service provider to despatch specified goods, identify the delivery location, identify the date on which delivery should take place, and, or indicate that the despatch is subject to cash on delivery, etc. Because the third party service provider is outside the normal buyer to supplier order process the Instruction to Despatch message may be used by the supplier or buyer to inform the third party service provider of information stated in the order which is required for the effective despatch of the goods, e.g., terms of delivery, transport equipment required for the delivery, etc. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. 4.1.1 Header section Information to be provided in the Header section: 00010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Instruction to despatch message is INSDES. Note: Instruction to despatch messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 INSDES 0052 D 0054 17B 0051 UN 00020 BGM, Beginning of message A segment for unique identification of the Instruction To Despatch message, by means of its name and its number. 00030 DTM, Date/time/period Date and or time, or period related to the whole message, e.g., the date on which delivery should take place. This segment must be specified at least once to identify the Instruction To Despatch message date. 00040 INP, Parties and instruction A segment to identify any instructions related to the delivery of goods which are relevant to the whole message, e.g., hold for quality control, release goods for despatch. 00050 FTX, Free text A segment providing additional free text pertinent to the complete Instruction to Despatch message. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 00060 Segment group 1: RFF-DTM A group of segments giving references where necessary, their dates relating to the whole message, e.g., contract number, purchase order number, etc. 00070 RFF, Reference A segment for identifying references relating to the whole Instruction to Despatch message, e.g., purchase orders, delivery instructions, import license, export license. 00080 DTM, Date/time/period A segment for specifying dates and or times, or periods related to the reference. 00090 Segment group 2: NAD-LOC-SG3-SG4 A group of segments identifying names, addresses, locations, and references relevant to the identified parties used for the whole message. 00100 NAD, Name and address A segment for identifying names, addresses, and their functions relevant to the whole Instruction to Despatch message. Identification of the parties involved is recommended for the Instruction to Despatch message and is to be given in this segment. It is recommended that where possible, only the coded form of the party identification should be specified, e.g., the buyer and seller are known to each other, thus only the coded identification is required. The consignee or delivery address may vary and would have to be clearly specified, preferably in structured format. 00110 LOC, Place/location identification A segment indicating more details regarding specific places and, or locations related to the currently identified party, e.g., internal site and, or building number. This segment may be used to identify locations relevant to all items detailed in the message. 00120 Segment group 3: RFF-DTM A group of segments giving references relevant only to the specified party rather than the whole message. 00130 RFF, Reference A segment for referencing documents relating to the currently identified party. 00140 DTM, Date/time/period A segment for specifying date and, or time, and, or period of the referred document. 00150 Segment group 4: CTA-COM A group of segments identifying the contact person or the department for the currently identified party and if required specifying the communications channel and number. 00160 CTA, Contact information A segment to identify the person, function or department within the current party where communications should be directed. 00170 COM, Communication contact A segment to identify communication types and numbers for the currently identified person, function or department. 00180 Segment group 5: TOD-LOC-FTX A group of segments indicating terms of delivery. The terms of delivery will be required by a third party service provider in order to arrange delivery according to the terms agreed in the order. 00190 TOD, Terms of delivery or transport A segment indicating the terms of delivery and transfer for the whole Instruction to Despatch message. 00200 LOC, Place/location identification A segment indicating locations relevant to the terms of delivery. 00210 FTX, Free text Additional free text pertinent to terms of delivery. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 00220 Segment group 6: TDT-PCD-SG7 A group of segments specifying details of the mode and means of transport and date and, or time of departure and destination relevant to the whole Instruction to Despatch message. The transport details will be required by a third party service provider in order to arrange delivery according to the terms agreed in the order. 00230 TDT, Transport information A segment specifying the mode and means of transport for the whole Instruction to Despatch message. 00240 PCD, Percentage details A segment specifying the percentage of utilization of the capacity of the means of transport. 00250 Segment group 7: LOC-DTM A group of segments giving the location and date, and, or time information relative to the transportation. 00260 LOC, Place/location identification A segment indicating locations relevant to the currently identified transport. 00270 DTM, Date/time/period A segment giving the date and or time, or period information of departure and, or arrival of the transported goods for the specified location. 00280 Segment group 8: EQD-MEA-EQA-SG9 A group of segments providing information relative to the equipment used for the transportation of goods relevant to the whole Instruction to Despatch message. The equipment details will be required by a third party service provider in order to arrange delivery according to the terms agreed in the order. 00290 EQD, Equipment details A segment to define fixed information regarding equipment used in conjunction with the whole Instruction to Despatch message, and if required, to indicate responsibility for supply of the equipment. 00300 MEA, Measurements A segment specifying physical measurements of the currently described equipment. 00310 EQA, Attached equipment A segment identifying equipment which is attached to the currently described equipment. 00320 Segment group 9: HAN-FTX A group of segments providing information on hazardous goods and their handling. 00330 HAN, Handling instructions A segment providing information on handling and notification of hazardous materials in the specified equipment. 00340 FTX, Free text A segment with free text information in coded or clear form to give further clarification, when required, for hazardous material. 4.1.2 Detail section Information to be provided in the Detail section: 00350 Segment group 10: LIN-PIA-IMD-QTY-GIN-INP-DTM-FTX-MOA-ALI-SG11- SG12-SG13-SG14 A group of segments providing details of individual line items for which Instruction to Despatch message information is being provided. 00360 LIN, Line item A segment identifying the line item for which Instruction to Despatch message information is being provided. All other segments in the detail section following this segment refer to this line item. 00370 PIA, Additional product id A segment providing additional product identification to that currently provided. 00380 IMD, Item description A segment for describing the line item for which Instruction to Despatch message information is being provided. This segment should be used for products that cannot be identified by a product code or article number. 00390 QTY, Quantity A segment to give quantity information related to the current line item. 00400 GIN, Goods identity number A segment providing identity numbers of the line item for which despatch instruction information is being provided, e.g., serial numbers of goods to be despatched or put on hold. 00410 INP, Parties and instruction A segment to identify any instructions related to the delivery of the current line item, e.g., hold until further notice. 00420 DTM, Date/time/period A segment providing date, and or time information related to the line item, e.g., requested delivery date. 00430 FTX, Free text A segment with free text information in coded or clear form to give further clarification, when required, to the line item. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 00440 MOA, Monetary amount A segment identifying monetary amounts related to the current line item for which a Instruction to Despatch message is being given, e.g., customs value, insurance value, cash on delivery amount. 00450 ALI, Additional information This segment is used to indicate the country of origin of the line item, special conditions due to origin, customs preference, fiscal or commercial factors are applicable. 00460 Segment group 11: RFF-DTM A group of segments to give reference numbers and dates related to the current line item. 00470 RFF, Reference A segment identifying references related to the current line item. 00480 DTM, Date/time/period A segment for specifying date and or time, or period relative to the current reference. 00490 Segment group 12: NAD-QTY-DTM-LOC A group of segments providing party information related to the current line item and where relevant, quantities, date and time, and additional locations within the party. 00500 NAD, Name and address A segment for identifying names and addresses and their functions relevant to the Instruction to Despatch message for the current line item. It is recommended that where possible only the coded form of the party identification should be specified, e.g., the buyer and seller are known to each other, thus only the coded identification is required. The consignee or delivery address may vary and would have to be clearly specified, preferably in structured format. 00510 QTY, Quantity A segment to specify a quantity related to the identified party for the current line item. The total value of the quantities specified in the repeats of this segment should equal the quantity value specified at the line item level. 00520 DTM, Date/time/period A segment providing date and, or time information related to the quantity specified for the current party. 00530 LOC, Place/location identification A segment identifying a specific location related to a quantity for the currently identified party. 00540 Segment group 13: PCI-GIN A group of segments identifying the marks and numbers on the package for the current line item. 00550 PCI, Package identification A segment specifying marking and labels on the packaging for the current line item. 00560 GIN, Goods identity number A segment providing identification numbers marked on the packaging for the current line item. 00570 Segment group 14: DGS-FTX-SG15 A group of segments to specify information about dangerous goods. 00580 DGS, Dangerous goods A segment to indicate the dangerous goods regulations which apply, the class of the dangerous goods, additional dangerous goods codes, the United Nations Dangerous Goods (UNDG) number and the shipment flash point. 00590 FTX, Free text A segment to specify supplementary details regarding the dangerous goods such as dangerous goods technical name and other additional information. 00600 Segment group 15: CTA-COM A group of segments to specify contact information. 00610 CTA, Contact information A segment to identify a person or department to be contacted regarding dangerous goods. 00620 COM, Communication contact A segment to specify communication details of the dangerous goods contact. 4.1.3 Summary section Information to be provided in the Summary section: 00630 UNS, Section control A service segment separating the detail section of the message from the summary section. 00640 MOA, Monetary amount A segment identifying monetary amounts related to the complete Instruction to Despatch message, e.g., customs value, insurance value, cash on delivery amount. 00650 CNT, Control total A segment by which control totals may be provided by sender for checking by the receiver. 00660 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) ALI Additional information BGM Beginning of message CNT Control total COM Communication contact CTA Contact information DGS Dangerous goods DTM Date/time/period EQA Attached equipment EQD Equipment details FTX Free text GIN Goods identity number HAN Handling instructions IMD Item description INP Parties and instruction LIN Line item LOC Place/location identification MEA Measurements MOA Monetary amount NAD Name and address PCD Percentage details PCI Package identification PIA Additional product id QTY Quantity RFF Reference TDT Transport information TOD Terms of delivery or transport UNH Message header UNS Section control UNT Message trailer
4.3 Message structure 4.3.1 Segment table Pos Tag Name S R HEADER SECTION 00010 UNH Message header M 1 00020 BGM Beginning of message M 1 00030 DTM Date/time/period M 9 00040 INP Parties and instruction C 99 00050 FTX Free text C 9 00060 ---- Segment group 1 ------------------ C 9----------------+ 00070 RFF Reference M 1 | 00080 DTM Date/time/period C 9----------------+ 00090 ---- Segment group 2 ------------------ C 9----------------+ 00100 NAD Name and address M 1 | 00110 LOC Place/location identification C 9 | | 00120 ---- Segment group 3 ------------------ C 9---------------+| 00130 RFF Reference M 1 || 00140 DTM Date/time/period C 9---------------+| | 00150 ---- Segment group 4 ------------------ C 9---------------+| 00160 CTA Contact information M 1 || 00170 COM Communication contact C 9---------------++ 00180 ---- Segment group 5 ------------------ C 9----------------+ 00190 TOD Terms of delivery or transport M 1 | 00200 LOC Place/location identification C 9 | 00210 FTX Free text C 9----------------+ 00220 ---- Segment group 6 ------------------ C 9----------------+ 00230 TDT Transport information M 1 | 00240 PCD Percentage details C 1 | | 00250 ---- Segment group 7 ------------------ C 9---------------+| 00260 LOC Place/location identification M 1 || 00270 DTM Date/time/period C 9---------------++ 00280 ---- Segment group 8 ------------------ C 9----------------+ 00290 EQD Equipment details M 1 | 00300 MEA Measurements C 9 | 00310 EQA Attached equipment C 9 | | 00320 ---- Segment group 9 ------------------ C 9---------------+| 00330 HAN Handling instructions M 1 || 00340 FTX Free text C 9---------------++ DETAIL SECTION 00350 ---- Segment group 10 ------------------ C 9999-------------+ 00360 LIN Line item M 1 | 00370 PIA Additional product id C 9 | 00380 IMD Item description C 99 | 00390 QTY Quantity C 9 | 00400 GIN Goods identity number C 99 | 00410 INP Parties and instruction C 99 | 00420 DTM Date/time/period C 9 | 00430 FTX Free text C 9 | 00440 MOA Monetary amount C 99 | 00450 ALI Additional information C 99 | | 00460 ---- Segment group 11 ------------------ C 9---------------+| 00470 RFF Reference M 1 || 00480 DTM Date/time/period C 1---------------+| | 00490 ---- Segment group 12 ------------------ C 99--------------+| 00500 NAD Name and address M 1 || 00510 QTY Quantity C 1 || 00520 DTM Date/time/period C 1 || 00530 LOC Place/location identification C 99--------------+| | 00540 ---- Segment group 13 ------------------ C 9999------------+| 00550 PCI Package identification M 1 || 00560 GIN Goods identity number C 9---------------+| | 00570 ---- Segment group 14 ------------------ C 99--------------+| 00580 DGS Dangerous goods M 1 || 00590 FTX Free text C 9 || || 00600 ---- Segment group 15 ------------------ C 9--------------+|| 00610 CTA Contact information M 1 ||| 00620 COM Communication contact C 9--------------+++ SUMMARY SECTION 00630 UNS Section control M 1 00640 MOA Monetary amount C 99 00650 CNT Control total C 9 00660 UNT Message trailer M 1