United Nations Directories
for Electronic Data Interchange for
Administration, Commerce and Transport
UN/EDIFACT
| United Nations Directories for Electronic Data Interchange for Administration, Commerce and Transport UN/EDIFACT |
Message Type : IFTMCS Version : D Release : 20A Contr. Agency: UN Revision : 13 Date : 2020-05-19 SOURCE: TBG3 Transport CONTENTS Instruction contract status message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 3.2 Message terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table --------------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction --------------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Instruction contract status message (IFTMCS) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE This paper provides the definition of the Instruction Contract Status Message to be used in fulfilling the requirements of trading partners in the transport chain worldwide, in the interchange of cargo and transport related information using Electronic Data Interchange (EDI). This message is a single consignment based message, being aligned with other single consignment based messages such as the booking messages (IFTMBP, IFTMBF and IFTMBC), the Instruction Message (IFTMIN) and the Arrival Notice Message (IFTMAN). The single consignment based messages can be used by all modes of transport for the forwarding and transport of goods from any origin to any destination, regardless of route or prevailing commercial practice. These messages are suitable for the arrangement of the transport of goods between all parties to the movement of the consignment (including the consignor/shipper and consignee as well as the forwarders, brokers, and carriers involved) as well as providing the information necessary to perform that transport and delivery of the goods. They should be used in the same way by each mode of transport when the requirements are common even if functionally similar information is known by different names. 1.1 Functional definition A message from the party providing the transport/forwarding services to the party that issued the instructions for those services stating the actual details, terms and conditions (charges when applicable) of the service and of the consignment involved. In addition it can be used for the exchange of contract information between carriers mutually. 1.2 Field of application The Instruction contract status message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles The party providing the transport services will send an instruction contract status message, usually after receipt of the instruction message. The message can replace the actual contractual document such as for instance a Waybill, under those circumstances where there are no legal or other restrictions. The message might contain information concerning charges but should not be seen as a replacement for the invoice. - A consignment may contain several goods items. - Goods items may or may not be containerized. - A goods item may be transported in one or more containers, and a single container may contain one or more goods items. - One goods item may be related to one or more customs tariff codes. - Goods items related to one customs tariff code may be carried in one or more containers. - Goods items may reflect either the contractual or operational description of the goods. - Pre-carriage (advanced haulage) and/or on-carriage (destination haulage) of goods items or equipment within one booking or instruction may take place in different steps, each step specified with its own transport details group. - Equipment may have other types of equipment attached to it, e.g. a temperature control unit attached to a container. - Equipment and/or goods items may be attached to or transported on another load or transport device, which as such may be attached to or transported on yet another load or transport device, e.g. a container on a chassis on a rail-car. - Transport devices, which have the ability of powered movement on their own, are specified in the transport details group. Other load or transport devices are specified as equipment. - The expression of packaging for goods items can be expressed at up to three levels. The transport sub-working group (D4) has developed recommendations for a harmonised implementation of this message through its subgroup ITIGG (International Transport Implementation Guidelines Group). Users implementing the message are strongly advised to apply these recommendations, which may be obtained from the D4 secretariat. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 3.2 Message terms and definitions A number of generic transport terms are used in this specification, to be described as: * MODE OF TRANSPORT: The method of transport used for the conveyance of goods or persons, e.g. by rail, by road, by sea. * MEANS OF TRANSPORT: The vehicle used for the transport of goods or persons, e.g. aircraft, truck, vessel. * TYPE OF MEANS OF TRANSPORT: The type of vehicle used in the transport process, e.g. wide body, tank truck, passenger vessel. * EQUIPMENT: Material resources necessary to facilitate the transport and handling of cargo. Transport equipment does under the given circumstances not have the ability to move by its own propulsion (e.g. sea container, trailer, unit load device, pallet). * TYPE OF EQUIPMENT: The type of material used, e.g. 40 feet container, four way pallet, mafi trailer. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. 00010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Instruction contract status message is IFTMCS. Note: Instruction contract status messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 IFTMCS 0052 D 0054 20A 0051 UN 00020 BGM, Beginning of message A segment to indicate the beginning of a message and to transmit identifying number and type of the message. 00030 CTA, Contact information A segment to identify a person or department to whom communication should be directed. 00040 COM, Communication contact A segment to identify a communication number of a person or department to whom communication should be directed. 00050 DTM, Date/time/period A segment to indicate a date and time applying to the whole message, e.g., date and time of document issue. 00060 TSR, Transport service requirements A segment to identify the contract, conditions of carriage, services, and priority requirements for the transport. 00070 CUX, Currencies A segment to indicate default currencies and exchange rates. 00080 MOA, Monetary amount A segment to indicate a monetary value for entire consignment, e.g. insured value, invoice amount, disbursements, etc. 00090 FTX, Free text A segment to specify free form or processable supplementary information, such as status of transport, remarks to be printed on the transport documents (where required), consignment remarks, insurance instructions, etc., or any other additional information. 00100 CNT, Control total A segment to specify totals for a consignment. 00110 GDS, Nature of cargo A segment to describe the nature of cargo. 00120 Segment group 1: LOC-DTM A group of segments to specify locations and related date(s)/time(s) which apply to the entire message, e.g. place of transhipment. 00130 LOC, Place/location identification A segment to identify a location applying to the entire message. 00140 DTM, Date/time/period A segment to indicate date(s) and time(s) relating to the location. 00150 Segment group 2: TOD-LOC A group of segments to specify terms of delivery and related locations. 00160 TOD, Terms of delivery or transport A segment to specify the applicable terms of delivery. 00170 LOC, Place/location identification A segment to specify a location related to the terms of delivery. 00180 Segment group 3: RFF-DTM A group of segments containing a reference and constants which apply to the entire message. 00190 RFF, Reference A segment to express a reference which applies to the entire message such as: the document/message number that is to be updated by this very message (according to data element 1225 Message function code in segment BGM), booking reference, order number, insurance contract, etc. 00200 DTM, Date/time/period A segment to indicate date and time relating to the reference. 00210 Segment group 4: GOR-DTM-LOC-SEL-FTX-SG5 A group of segments to identify customs and other governmental procedures and required documents. 00220 GOR, Governmental requirements A segment to indicate applicable governmental procedures related to import, export and transport of the goods. 00230 DTM, Date/time/period A segment to indicate date and time related to documents and/or Customs- and/or governmental procedures for the consignment (e.g. date of issuing of Customs document, expiration date of Customs document, etc.). 00240 LOC, Place/location identification A segment to specify locations associated with Customs- and/or governmental procedures for the consignment (e.g. Customs office of exit, Customs office of destination, etc.). 00250 SEL, Seal number A segment to identify seals and seal issuer associated with the Customs procedure and/or Customs document for the consignment. 00260 FTX, Free text A segment to provide additional governmental requirements information. 00270 Segment group 5: DOC-DTM A group of segments to specify required documents by government. 00280 DOC, Document/message details A segment to indicate a document required by government. 00290 DTM, Date/time/period A segment to specify the date/time related to the required document. 00300 Segment group 6: CPI-RFF-CUX-LOC-MOA A group of segments to indicate charge methodology which applies to the entire message. 00310 CPI, Charge payment instructions A segment to indicate default charge methodology. 00320 RFF, Reference A segment to indicate a reference relating to the CPI segment, such as charge reference number. 00330 CUX, Currencies A segment to specify the payment currency related to the charge methodology. 00340 LOC, Place/location identification A segment to identify the place of charge collection. 00350 MOA, Monetary amount A segment to identify the monetary amount associated with the charges. 00360 Segment group 7: TCC-LOC-FTX-CUX-PRI-EQN-PCD-MOA-QTY A group of segments to specify charge calculations associated with the transport. 00370 TCC, Charge/rate calculations A segment to specify charge. 00380 LOC, Place/location identification A segment to indicate a location. 00390 FTX, Free text A segment to specify processable supplementary information associated with charge. 00400 CUX, Currencies A segment to specify currencies associated with charge. 00410 PRI, Price details A segment to specify price details such as price (e.g. 100 dollars) and unit price basis (e.g. per 1000 kilograms). 00420 EQN, Number of units A segment to specify the number of units to which the unit price basis applies. 00430 PCD, Percentage details A segment to indicate the applicable reduction or surcharge percentage details. 00440 MOA, Monetary amount A segment to specify a monetary amount, such as prepaid amount, discount or total amount. 00450 QTY, Quantity A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 00460 Segment group 8: TDT-DTM-SG9-SG10-SG11 A group of segments to indicate details of the movement of goods such as mode and means of transport, locations, departure, and arrival date(s) and time(s). 00470 TDT, Transport information A segment to indicate information related to a certain stage of the transport, such as mode, means and carrier. 00480 DTM, Date/time/period A segment to indicate date(s) and time(s) related to the transport stage. 00490 Segment group 9: TSR-SCC A group of segments to specify transport service requirements and scheduling conditions 00500 TSR, Transport service requirements A segment to identify contract, conditions of carriage, services, priority requirements for this stage of transport. 00510 SCC, Scheduling conditions A segment to specify scheduling conditions associated to service requirements. 00520 Segment group 10: LOC-DTM A group of segments to specify a location and date/time related to this leg of transport. 00530 LOC, Place/location identification A segment to indicate a location such as origin, destination, stop off, etc. related to this leg of transport. 00540 DTM, Date/time/period A segment to specify a date/time related to the location, such as arrival date/time of a means of transport at a specific location. 00550 Segment group 11: RFF-DTM A group of segments to specify an additional reference related to the stage of the transport. 00560 RFF, Reference A segment to specify the additional reference. 00570 DTM, Date/time/period A segment to identify date and time relating to the reference. 00580 Segment group 12: NAD-LOC-MOA-SG13-SG14-SG15-SG16-SG17-SG18 A group of segments to identify a party, related references, locations contacts, required documents, and charges to be paid by the party. 00590 NAD, Name and address A segment to identify the party's name, address, and function. 00600 LOC, Place/location identification A segment to indicate location where a specific function will be performed. 00610 MOA, Monetary amount A segment to identify the monetary amount associated with the party. 00620 Segment group 13: CTA-COM A group of segments identifying a contact and its communications related to the party. 00630 CTA, Contact information A segment to identify a person or department within a party. 00640 COM, Communication contact A segment to identify a communication number of a person or department to whom communication should be directed. 00650 Segment group 14: DOC-DTM A group of segments to identify required documents. 00660 DOC, Document/message details A segment to identify a document required of, by or for the party. 00670 DTM, Date/time/period A segment to identify date and time relating to the reference. 00680 Segment group 15: TCC-CUX-PRI-EQN-PCD-MOA-QTY A group of segments to specify charges associated with the party. 00690 TCC, Charge/rate calculations A segment to specify charges associated with the party. 00700 CUX, Currencies A segment to specify currency details related to the freight charge. 00710 PRI, Price details A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram). 00720 EQN, Number of units A segment to specify the number of units to which the unit price basis applies. 00730 PCD, Percentage details A segment to indicate the applicable reduction or surcharge percentage details. 00740 MOA, Monetary amount A segment to specify a monetary amount, such as prepaid amount, discount or total amount. 00750 QTY, Quantity A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 00760 Segment group 16: RFF-DTM A group of segments to specify a reference related to the party. 00770 RFF, Reference A segment to identify a reference used by a party. 00780 DTM, Date/time/period A segment to indicate date and time relating to the reference. 00790 Segment group 17: CPI-RFF-CUX-LOC-MOA A group of segments to identify the charge and its amount to be paid by the party. 00800 CPI, Charge payment instructions A segment to identify default charge methodology. 00810 RFF, Reference A segment to indicate a reference relating to the CPI segment, such as charge reference number. 00820 CUX, Currencies A segment to indicate payment currency related to the charge methodology. 00830 LOC, Place/location identification A segment to identify the place of charge collection. 00840 MOA, Monetary amount A segment to identify the monetary amount associated with the charges. 00850 Segment group 18: TSR-RFF-LOC-TPL-FTX A group of segments to specify a transport service requirement and its associated details (such as applicable commercial agreement) related to the party. 00860 TSR, Transport service requirements A segment to specify a required service for the transport, such as re-icing. 00870 RFF, Reference A segment to identify a commercial agreement related to the service requirement. 00880 LOC, Place/location identification A segment to indicate the location where the required service must be performed, such as place of re-icing. 00890 TPL, Transport placement A segment to identify the means of transport to which the service requirement applies. 00900 FTX, Free text A segment to provide any additional information related to the service requirement. 00910 Segment group 19: GID-HAN-TMP-RNG-TMD-LOC-MOA-PIA-FTX-PCD-SG20-GDS- SG21-SG22-SG23-SG24-SG25-SG26-SG28-SG30-SG31 A group of segments to describe the goods items for which transport is undertaken. 00920 GID, Goods item details A segment to identify a goods item for which transport is undertaken. A goods item can be identified by up to three levels of packaging. 00930 HAN, Handling instructions A segment to specify handling instructions relating to the goods item. 00940 TMP, Temperature A segment to specify a temperature setting for a goods item. 00950 RNG, Range details A segment to specify a temperature range setting for a goods item. 00960 TMD, Transport movement details A segment to specify transport movement details for a goods item. 00970 LOC, Place/location identification A segment to specify a country associated with a goods item, such as country of origin, or country of destination. 00980 MOA, Monetary amount A segment to specify a monetary amount associated with a goods item, such as declared value, FOB value, etc. 00990 PIA, Additional product id A segment to specify article numbers. 01000 FTX, Free text A segment to specify processable supplementary information relating to the goods item. 01010 PCD, Percentage details A segment to specify percentages related to cargo shipped in controlled atmosphere equipment such as percentage humidity. 01020 Segment group 20: NAD-DTM A group of segments to identify different places of collection and/or delivery for the goods item. 01030 NAD, Name and address A segment to specify an address of a place of collection or delivery for a goods item. 01040 DTM, Date/time/period A segment to indicate date and time relating to the place of collection or delivery. 01050 GDS, Nature of cargo A segment to describe the nature of cargo. 01060 Segment group 21: MEA-EQN A group of segments to specify measurements applicable to a goods item. 01070 MEA, Measurements A segment to specify measurements, other than dimensions, applicable to a goods item. 01080 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 01090 Segment group 22: DIM-EQN A group of segments to specify dimensions applicable to a goods item. 01100 DIM, Dimensions To specify dimensions applicable to a goods item. 01110 EQN, Number of units A segment to specify the number of equipment units to each of which the given dimension applies. 01120 Segment group 23: RFF-DTM A group of segments to identify references to a goods item. 01130 RFF, Reference A segment to identify a reference to a goods item. 01140 DTM, Date/time/period A segment to indicate date and time relating to the reference. 01150 Segment group 24: PCI-RFF-DTM-GIN A group of segments to specify marks and numbers of a goods item. 01160 PCI, Package identification A segment to specify marks and numbers of a good item. 01170 RFF, Reference A segment to identify a reference relating to the marks and numbers. 01180 DTM, Date/time/period A segment to identify date and time of the reference. 01190 GIN, Goods identity number A segment to specify identifying numbers related to transport units, such as batch numbers, serial numbers, etc. 01200 Segment group 25: DOC-DTM A group of segments to specify documents and associated date(s) and time(s) for a goods item. 01210 DOC, Document/message details A segment to specify a document prepared for a goods item. 01220 DTM, Date/time/period A segment to associate date and time with the prepared document. 01230 Segment group 26: TPL-SG27 A group of segments to identify transport details and associated measurements for a goods item. This group may be repeated to indicate the different phases of the movement. 01240 TPL, Transport placement A segment to identify transport details for a goods item. 01250 Segment group 27: MEA-EQN A group of segments to identify measurements. 01260 MEA, Measurements A segment to specify the distribution of a goods item among the transport details. 01270 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 01280 Segment group 28: SGP-SEQ-SG29 A group of segments to specify the distribution of a goods item among the transport equipment. 01290 SGP, Split goods placement A segment to identify the equipment in which goods are transported. 01300 SEQ, Sequence details A segment to indicate where cargo is stowed in a container (in the front, in the middle, in the rear etc.) by use of a sequence number. The lowest number indicates stowage in the front of the container with higher numbers indicating that the cargo is stowed more toward the rear door. 01310 Segment group 29: MEA-EQN A group of segments to identify measurements. 01320 MEA, Measurements A segment to specify measurements of that portion of the goods item in the equipment. 01330 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 01340 Segment group 30: TCC-CUX-PRI-EQN-PCD-MOA-QTY-LOC A group of segments to specify charge associated with the goods item. 01350 TCC, Charge/rate calculations A segment to specify charge associated with the goods item. 01360 CUX, Currencies A segment to specify currencies associated with charge. 01370 PRI, Price details A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram). 01380 EQN, Number of units A segment to specify the number of units to which the unit price basis applies. 01390 PCD, Percentage details A segment to indicate the applicable reduction or surcharge percentage details. 01400 MOA, Monetary amount A segment to specify a monetary amount, such as prepaid amount, discount or total amount. 01410 QTY, Quantity A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 01420 LOC, Place/location identification A segment to indicate location where a specific function will be performed. 01430 Segment group 31: DGS-FTX-SG32-SG33-SG34 A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes. 01440 DGS, Dangerous goods A segment to indicate the class of dangerous goods, packing group, etc. 01450 FTX, Free text A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information. 01460 Segment group 32: CTA-COM A group of segments to identify a contact to whom communication regarding the dangerous goods can be directed. 01470 CTA, Contact information A segment to identify a person or department. 01480 COM, Communication contact A segment to identify a communication number of a person or department. 01490 Segment group 33: MEA-EQN A group of segments to identify dangerous goods measurements. 01500 MEA, Measurements A segment to specify measurements of the dangerous goods. 01510 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 01520 Segment group 34: SGP-SG35 A group of segments to specify the distribution of the dangerous goods among the transport equipment. 01530 SGP, Split goods placement A segment to identify the equipment in which the dangerous goods are transported. 01540 Segment group 35: MEA-EQN A group of segments to identify dangerous goods measurements. 01550 MEA, Measurements A segment to specify measurements of that portion of the dangerous goods in the equipment. 01560 EQN, Number of units A segment to specify the number of equipment units to each of which the given measurement applies. 01570 Segment group 36: EQD-EQN-TMD-MEA-DIM-SEL-TPL-HAN-TMP-RNG-FTX-RFF- SG37-SG38-SG39-SG40 A group of segments to specify equipment in which goods are transported. 01580 EQD, Equipment details A segment to specify equipment, and equipment size and type used in the transport. 01590 EQN, Number of units A segment to specify number of pieces of equipment required. 01600 TMD, Transport movement details A segment to specify transport movement details for the equipment. 01610 MEA, Measurements A segment to specify measurements, other than dimensions, associated with the equipment, such as weight. 01620 DIM, Dimensions A segment to specify dimensions applicable to equipment. 01630 SEL, Seal number A segment to identify seal and seal issuer associated with the equipment. 01640 TPL, Transport placement A segment to identify transport details for the equipment. 01650 HAN, Handling instructions A segment to specify handling instructions for specified equipment. 01660 TMP, Temperature A segment to specify a temperature setting for the equipment. 01670 RNG, Range details A segment to specify a temperature range for the equipment. 01680 FTX, Free text A segment to specify processable supplementary information associated with the equipment. 01690 RFF, Reference A segment to specify a reference number to equipment. 01700 Segment group 37: TCC-CUX-PRI-EQN-PCD-MOA-QTY A group of segments to specify charges associated with the equipment. 01710 TCC, Charge/rate calculations A segment to specify a charge associated with the equipment. 01720 CUX, Currencies A segment to specify currency details related to the freight charge. 01730 PRI, Price details A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram). 01740 EQN, Number of units A segment to specify the number of units to which the unit price basis applies. 01750 PCD, Percentage details A segment to indicate the applicable reduction or surcharge percentage details. 01760 MOA, Monetary amount A segment to specify a monetary amount, such as prepaid amount, discount or total amount. 01770 QTY, Quantity A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 01780 Segment group 38: NAD-DTM A group of segments to identify different equipment pick-up or drop-off places. 01790 NAD, Name and address A segment to specify a pick-up or drop-off address. 01800 DTM, Date/time/period A segment to indicate date and time relating to pick-up or drop-off. 01810 Segment group 39: EQA-EQN A group of segments to specify the attached equipment and related number of pieces. 01820 EQA, Attached equipment A segment to identify attached or related equipment such as a chassis attached to a container. 01830 EQN, Number of units A segment to specify number of pieces of equipment required. 01840 Segment group 40: DGS-FTX-SG41 A group of segments to specify dangerous goods. 01850 DGS, Dangerous goods A segment to indicate the dangerous goods regulations which apply, the class of the dangerous goods, additional dangerous goods codes, the United Nations Dangerous Goods (UNDG) number and the shipment flash point. 01860 FTX, Free text A segment to specify supplementary details regarding the dangerous goods such as dangerous goods technical name and other additional information. 01870 Segment group 41: CTA-COM A group of segments to specify contact information. 01880 CTA, Contact information A segment to identify a person or department to be contacted regarding dangerous goods. 01890 COM, Communication contact A segment to specify communication details of the dangerous goods contact. 01900 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) BGM Beginning of message CNT Control total COM Communication contact CPI Charge payment instructions CTA Contact information CUX Currencies DGS Dangerous goods DIM Dimensions DOC Document/message details DTM Date/time/period EQA Attached equipment EQD Equipment details EQN Number of units FTX Free text GDS Nature of cargo GID Goods item details GIN Goods identity number GOR Governmental requirements HAN Handling instructions LOC Place/location identification MEA Measurements MOA Monetary amount NAD Name and address PCD Percentage details PCI Package identification PIA Additional product id PRI Price details QTY Quantity RFF Reference RNG Range details SCC Scheduling conditions SEL Seal number SEQ Sequence details SGP Split goods placement TCC Charge/rate calculations TDT Transport information TMD Transport movement details TMP Temperature TOD Terms of delivery or transport TPL Transport placement TSR Transport service requirements UNH Message header UNT Message trailer
4.3 Message structure 4.3.1 Segment table Pos Tag Name S R 00010 UNH Message header M 1 00020 BGM Beginning of message M 1 00030 CTA Contact information C 1 00040 COM Communication contact C 9 00050 DTM Date/time/period C 9 00060 TSR Transport service requirements C 9 00070 CUX Currencies C 9 00080 MOA Monetary amount C 99 00090 FTX Free text C 99 00100 CNT Control total C 9 00110 GDS Nature of cargo C 9 00120 ---- Segment group 1 ------------------ C 99---------------+ 00130 LOC Place/location identification M 1 | 00140 DTM Date/time/period C 9----------------+ 00150 ---- Segment group 2 ------------------ C 2----------------+ 00160 TOD Terms of delivery or transport M 1 | 00170 LOC Place/location identification C 9----------------+ 00180 ---- Segment group 3 ------------------ C 99---------------+ 00190 RFF Reference M 1 | 00200 DTM Date/time/period C 9----------------+ 00210 ---- Segment group 4 ------------------ C 9----------------+ 00220 GOR Governmental requirements M 1 | 00230 DTM Date/time/period C 9 | 00240 LOC Place/location identification C 9 | 00250 SEL Seal number C 9 | 00260 FTX Free text C 9 | | 00270 ---- Segment group 5 ------------------ C 9---------------+| 00280 DOC Document/message details M 1 || 00290 DTM Date/time/period C 1---------------++ 00300 ---- Segment group 6 ------------------ C 9----------------+ 00310 CPI Charge payment instructions M 1 | 00320 RFF Reference C 99 | 00330 CUX Currencies C 1 | 00340 LOC Place/location identification C 9 | 00350 MOA Monetary amount C 9----------------+ 00360 ---- Segment group 7 ------------------ C 99---------------+ 00370 TCC Charge/rate calculations M 1 | 00380 LOC Place/location identification C 1 | 00390 FTX Free text C 1 | 00400 CUX Currencies C 1 | 00410 PRI Price details C 1 | 00420 EQN Number of units C 1 | 00430 PCD Percentage details C 1 | 00440 MOA Monetary amount C 9 | 00450 QTY Quantity C 9----------------+ 00460 ---- Segment group 8 ------------------ C 99---------------+ 00470 TDT Transport information M 1 | 00480 DTM Date/time/period C 9 | | 00490 ---- Segment group 9 ------------------ C 9---------------+| 00500 TSR Transport service requirements M 1 || 00510 SCC Scheduling conditions C 9---------------+| | 00520 ---- Segment group 10 ------------------ C 99--------------+| 00530 LOC Place/location identification M 1 || 00540 DTM Date/time/period C 9---------------+| | 00550 ---- Segment group 11 ------------------ C 9---------------+| 00560 RFF Reference M 1 || 00570 DTM Date/time/period C 1---------------++ 00580 ---- Segment group 12 ------------------ C 99---------------+ 00590 NAD Name and address M 1 | 00600 LOC Place/location identification C 9 | 00610 MOA Monetary amount C 9 | | 00620 ---- Segment group 13 ------------------ C 9---------------+| 00630 CTA Contact information M 1 || 00640 COM Communication contact C 9---------------+| | 00650 ---- Segment group 14 ------------------ C 9---------------+| 00660 DOC Document/message details M 1 || 00670 DTM Date/time/period C 1---------------+| | 00680 ---- Segment group 15 ------------------ C 99--------------+| 00690 TCC Charge/rate calculations M 1 || 00700 CUX Currencies C 1 || 00710 PRI Price details C 1 || 00720 EQN Number of units C 1 || 00730 PCD Percentage details C 1 || 00740 MOA Monetary amount C 9 || 00750 QTY Quantity C 9---------------+| | 00760 ---- Segment group 16 ------------------ C 9---------------+| 00770 RFF Reference M 1 || 00780 DTM Date/time/period C 9---------------+| | 00790 ---- Segment group 17 ------------------ C 9---------------+| 00800 CPI Charge payment instructions M 1 || 00810 RFF Reference C 99 || 00820 CUX Currencies C 1 || 00830 LOC Place/location identification C 9 || 00840 MOA Monetary amount C 9---------------+| | 00850 ---- Segment group 18 ------------------ C 99--------------+| 00860 TSR Transport service requirements M 1 || 00870 RFF Reference C 1 || 00880 LOC Place/location identification C 1 || 00890 TPL Transport placement C 1 || 00900 FTX Free text C 9---------------++ 00910 ---- Segment group 19 ------------------ C 99999------------+ 00920 GID Goods item details M 1 | 00930 HAN Handling instructions C 1 | 00940 TMP Temperature C 9 | 00950 RNG Range details C 9 | 00960 TMD Transport movement details C 1 | 00970 LOC Place/location identification C 9 | 00980 MOA Monetary amount C 9 | 00990 PIA Additional product id C 9 | 01000 FTX Free text C 9 | 01010 PCD Percentage details C 9 | | 01020 ---- Segment group 20 ------------------ C 9---------------+| 01030 NAD Name and address M 1 || 01040 DTM Date/time/period C 1---------------+| 01050 GDS Nature of cargo C 9 | | 01060 ---- Segment group 21 ------------------ C 99--------------+| 01070 MEA Measurements M 1 || 01080 EQN Number of units C 1---------------+| | 01090 ---- Segment group 22 ------------------ C 99--------------+| 01100 DIM Dimensions M 1 || 01110 EQN Number of units C 1---------------+| | 01120 ---- Segment group 23 ------------------ C 9---------------+| 01130 RFF Reference M 1 || 01140 DTM Date/time/period C 9---------------+| | 01150 ---- Segment group 24 ------------------ C 9---------------+| 01160 PCI Package identification M 1 || 01170 RFF Reference C 1 || 01180 DTM Date/time/period C 1 || 01190 GIN Goods identity number C 9---------------+| | 01200 ---- Segment group 25 ------------------ C 9---------------+| 01210 DOC Document/message details M 1 || 01220 DTM Date/time/period C 9---------------+| | 01230 ---- Segment group 26 ------------------ C 9---------------+| 01240 TPL Transport placement M 1 || || 01250 ---- Segment group 27 ------------------ C 9--------------+|| 01260 MEA Measurements M 1 ||| 01270 EQN Number of units C 1--------------++| | 01280 ---- Segment group 28 ------------------ C 999-------------+| 01290 SGP Split goods placement M 1 || 01300 SEQ Sequence details C 1 || || 01310 ---- Segment group 29 ------------------ C 9--------------+|| 01320 MEA Measurements M 1 ||| 01330 EQN Number of units C 1--------------++| | 01340 ---- Segment group 30 ------------------ C 99--------------+| 01350 TCC Charge/rate calculations M 1 || 01360 CUX Currencies C 1 || 01370 PRI Price details C 1 || 01380 EQN Number of units C 1 || 01390 PCD Percentage details C 1 || 01400 MOA Monetary amount C 9 || 01410 QTY Quantity C 9 || 01420 LOC Place/location identification C 9---------------+| | 01430 ---- Segment group 31 ------------------ C 99--------------+| 01440 DGS Dangerous goods M 1 || 01450 FTX Free text C 99 || || 01460 ---- Segment group 32 ------------------ C 9--------------+|| 01470 CTA Contact information M 1 ||| 01480 COM Communication contact C 9--------------+|| || 01490 ---- Segment group 33 ------------------ C 9--------------+|| 01500 MEA Measurements M 1 ||| 01510 EQN Number of units C 1--------------+|| || 01520 ---- Segment group 34 ------------------ C 999------------+|| 01530 SGP Split goods placement M 1 ||| ||| 01540 ---- Segment group 35 ------------------ C 9-------------+||| 01550 MEA Measurements M 1 |||| 01560 EQN Number of units C 1-------------++++ 01570 ---- Segment group 36 ------------------ C 999--------------+ 01580 EQD Equipment details M 1 | 01590 EQN Number of units C 1 | 01600 TMD Transport movement details C 1 | 01610 MEA Measurements C 9 | 01620 DIM Dimensions C 9 | 01630 SEL Seal number C 99 | 01640 TPL Transport placement C 9 | 01650 HAN Handling instructions C 1 | 01660 TMP Temperature C 1 | 01670 RNG Range details C 1 | 01680 FTX Free text C 9 | 01690 RFF Reference C 9 | | 01700 ---- Segment group 37 ------------------ C 99--------------+| 01710 TCC Charge/rate calculations M 1 || 01720 CUX Currencies C 1 || 01730 PRI Price details C 1 || 01740 EQN Number of units C 1 || 01750 PCD Percentage details C 1 || 01760 MOA Monetary amount C 9 || 01770 QTY Quantity C 9---------------+| | 01780 ---- Segment group 38 ------------------ C 9---------------+| 01790 NAD Name and address M 1 || 01800 DTM Date/time/period C 1---------------+| | 01810 ---- Segment group 39 ------------------ C 99--------------+| 01820 EQA Attached equipment M 1 || 01830 EQN Number of units C 1---------------+| | 01840 ---- Segment group 40 ------------------ C 99--------------+| 01850 DGS Dangerous goods M 1 || 01860 FTX Free text C 9 || || 01870 ---- Segment group 41 ------------------ C 9--------------+|| 01880 CTA Contact information M 1 ||| 01890 COM Communication contact C 9--------------+++ 01900 UNT Message trailer M 1