United Nations Directories
for Electronic Data Interchange for
Administration, Commerce and Transport
UN/EDIFACT
| United Nations Directories for Electronic Data Interchange for Administration, Commerce and Transport UN/EDIFACT |
Message Type : CONITT Version : D Release : 20B Contr. Agency: UN Revision : 5 Date : 2021-03-23 SOURCE: TBG6 Architecture, Engineering and Construction CONTENTS Invitation to tender message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 3.2 Message terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.1.1 Header section 4.1.2 Detail section 4.1.3 Summary section 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table --------------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction --------------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Invitation to tender message (CONITT) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE 1.1 Functional definition At the pre-construction stage of a construction project, the Client will wish to appoint a contractor to execute the works. The first step in this appointment process is to issue an invitation to tender (ITT) to contractors this will require a commercial offer to be made by the contractor to the client. 1.2 Field of application The Invitation to tender message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. The following descriptions refer to the construction industry as an example, but do not exclude other business sectors' implementation. 1.3 Principles A BoQ is a set of documentation that describes the various facets of work that make up a construction project. This documentation is often quite voluminous and typically contains information structured in accordance with several industry standards. The BoQ is a key set of documentation for a number of stages within the overall construction process. This documentation, or parts of it, are frequently exchanged between the various parties involved in the project. A significant document used within the invitation to tender process is the Bill of Quantities (BoQ). This documentation subsequently becomes the contractual basis for the project. A project is typically subdivided into individual groupings of work and within these groups are detailed work items. It is down to this level of detailed work items that commercial offer information is to be supplied. If there are any project design changes during the tender period, which have an impact on the detailed work items in a BoQ, these would also be communicated in a CONITT message. Although the initial exchange typically takes place at the pre- tender stage, it may also be used post-tender. At the pre-tender stage, one or more competing Main Contractors will be sent by the Client or his representative, a BoQ document for the purpose of pricing the detailed work items to support the commercial tender offer. The Main Contractors in turn may wish to invite tenders from subcontractors for specialist portions of the project. This would be done by each competing Main Contractor creating subsets of the original BoQ document for each type of specialist work and sending that in turn to a number of competing subcontractors of their choice. Once the main contract has been established with the successful Main Contractor, the ITT process will in some cases be repeated with subcontractors. This will enable the Main Contractor to seek improved offers from subcontractors following the securement of the contract. This is only one of a number of messages being designed for the BoQ and the principles for this CONITT message are consistent with those adopted for each of the other BoQ messages. There are several concepts to be understood and these are key to some of the design principles adopted. Most of these have been created to respond to two base problems associated with the BoQ documentation: i) A BoQ is often a very large document, it is not unusual for it to run to several volumes in its paper form. ii) Given the size of the documents, there is also the problem of how to advise on the structure to which the document conforms and the accurate indexing and sequencing of information within such a volume of data. 1.3.1 Work Items Each individual component of work referred to in the BoQ is called a "work item" and it is at this level that progress and payments are evaluated. For each work item a description is provided and this description is very precise in its wording. This results in two things: i) A lot of repetitive descriptions for like items at least at the higher levels within these levelled descriptions. ii) A lot of similar work items, indeed the same description, often occurs a number of times throughout the project but assigned to different work items. Point ii) above has been addressed by a concept called " standard items", this enables an equivalent to a standard library of descriptions to be exchanged and individual work items to reference a standard description that need be sent, only once. Frequently within a BoQ, elements of an item's description are common to adjacent items. When this happens the items which share the same description are grouped together and the common part of the description is presented once at the start of the group. This concept is used extensively and it is possible to have quite a number of layers of shared heading. Two distinctions need to be established, firstly, the existence of Heading text which is related to an item. There can be multiples of these as in the levels of a standard description. The second distinction is that of "Groups". Where a group is a collection of more than one work item and all of these items have a common theme. For example: - they all belong to the same trade - all for the same part of the project, building or structure. Despite the large number of items that they may embrace, or the fact that they represent substantial parts of the project, all of these are recognised as "groups". Thus, there can be several or many items within a group and there can be layers of groups within groups, all of which collectively constitute the project. 1.3.2 Indexing There are numerous variations for structuring the information that makes up the BoQ. Although, it is possible to introduce some standardisation it is clear that any message must allow the freedom to structure the data according to the dictates of a individual project. The design therefore, includes the ability to convey the document's structure as part of the BoQ message. Indeed the design allows for a different set of document structuring information, to be defined at group level as well as globally for the project. This means that a set of indexing rules can be defined to apply to the entire project and that a different set of indexing rules can be used to override these for a given group(s). To complement the indexing concept there is a component referred to as the "Project Index Reference". This is a faceted code assigned to all items of data that are to be used in conjunction with the index. In other words all pieces of data that are to be structured using the index must contain a structured code composed in accordance with the index and this is used as a "sorting" mechanism to ensure that the data is correctly structured. 1.3.3 Message format The actual appearance of the message bears no relation to the appearance of the current paper document. As there are unlimited permutations for assembling the BoQ data it has not been possible, nor desirable to make the appearance similar. The CONITT appearance is similar to the results of the data analysis exercise. Namely that there are 4 blocks or groupings of data, each of which can appear many times and that all of the mechanisms for linking and relating the components together are data elements within these blocks. The task of interpreting the indexing rules and subsequently assembling the data in the message will fall to local software. The complexity of this task has been simplified by grouping the data elements into the blocks described above. In this way the processing can follow a logical flow. This approach has several advantages over the existing rigidity of the paper document. It is clear to the message design team that BoQ documentation exchanged using EDI will deliver a variety of new opportunities to its users. This last principle offers the solution to the volume problem too. One message has a definitive number of occurrences for each block of data. If for a "large" project this number is exceeded then multiple versions of the same message are built. It also enables a BoQ to be exchanges in subdivisions if so desired. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 3.2 Message terms and definitions Bill of Quantities - BoQ A document that is used as the basis of a tender. It gives a description and measurement of quantities of labour and materials, and other items required to carry out a building contract. It is based upon the drawing specifications and schedules and forms part of the Contract documents. Form of Tender Pro-forma's that are issued by the Client's representative and used by competing contractors to submit their proposed prices. Price Fluctuation Formula A formal process for calculating the allowance in a contract for changes in the cost of labour and material that occur during the course of construction. Timesing A multiplication factor applied when taking dimension information from drawings. It is used to denote the number of times a particular piece of work is repeated. Trade An occupation such as carpentry or bricklaying that needs a specific set of manual skills and training. Work Item Individual components of work that are identified within a BoQ. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. 4.1.1 Header section Information to be provided in the Header section: 00010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Invitation to tender message is CONITT. Note: Invitation to tender messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 CONITT 0052 D 0054 20B 0051 UN 00020 BGM, Beginning of message A segment which identifies the document name and the message function code. 00030 RFF, Reference This segment is used to identify the unique project reference number. 00040 DTM, Date/time/period The document date will be recorded using this DTM segment. 00050 AUT, Authentication result A segment used to authenticate the message by exchanging a password or some other form of identification agreed between the trading partners. 00060 AGR, Agreement identification This segment will be used to identify the "type of contract and form of tender" that apply to this contract. 00070 Segment group 1: IND-RCS-SG2 A group of segments to record both the structure and contents of the indexing used for the BoQ document. 00080 IND, Index details A segment to qualify whether the index applies to the whole project, part of a project (a group of items), or whether the index provides an alternative view (analysis) of the work items. The segment also indicates in the index qualifier whether it contains index structure information or describes the index contents. 00090 RCS, Requirements and conditions A segment used to indicate the action request (add, change etc.) to be applied to the index data. 00100 Segment group 2: GEI-SG3 A group of segments to specify the position and detailed component parts of the index information. 00110 GEI, Processing information This indicator segment specifies one of six positions within the index structure to which the detailed information applies. 00120 Segment group 3: BII-IMD A group of segments to specify the detailed components of the index information. 00130 BII, Structure identification A segment used to specify a structured index number that is to be associated with the descriptions that follow in segment IMD. 00140 IMD, Item description A segment to specify the descriptions in both full text and abbreviated form . These descriptions to be associated with the contents of segment BII. 00150 Segment group 4: BII-RCS-GEI-NAD-LOC-APR-ALI-QTY-DTM-RTE-SG5-SG6- SG7-SG9-SG10-SG18 This information is subordinate to the data provided within the Header section and relates to groups of work items as described in section 1.3.1 of this document. A segment group recording all the details that apply to a group of items. There can be many "Groups of items" within a project and all are to be recorded within this part of the message. 00160 BII, Structure identification A segment used to convey a structured index number that uniquely identifies each group of items recorded for the project. 00170 RCS, Requirements and conditions The action to be applied to segment group 4 data is recorded here. 00180 GEI, Processing information This indicator segment identifies what category of item grouping. 00190 NAD, Name and address The recording of the name and address information applying to this group of items. 00200 LOC, Place/location identification In addition to the name and address details above this is the identification of a location description and an abbreviated or short name by which the grouping is to be known. 00210 APR, Additional price information A segment to record a multiplication factor called "Timesing" that applies to the entire project or a specific grouping of items. 00220 ALI, Additional information This segment would be used to denote, in a coded form, what rules were adopted for the rounding of all financial values within this group of items. 00230 QTY, Quantity This segment enables grouping control quantities to be recorded. These are not to be confused with message control totals that appear later and use the CNT segment. 00240 DTM, Date/time/period Any date details required for the group of items will be recorded using the DTM segment. There are a considerable number of different date qualifiers that could apply. 00250 RTE, Rate details This segment is used to record a cost rate that may apply to this grouping. 00260 Segment group 5: RFF-DTM-GEI-FTX Some base data about how the information for this group of items was compiled. It will identify the standard method conventions adopted, the author of the data and it will also refer to any "request for quotation" messages that are to be read in conjunction . 00270 RFF, Reference This segment will be used to specify a series of references, including the reference to a "Request for Quotation" message, standard method identity, the identity of the author of the data and the identity, if appropriate any software tool used during the preparation process. 00280 DTM, Date/time/period The date of the Request for Quotation message that is to be processed in conjunction with this BoQ message. 00290 GEI, Processing information An entry in this segment will acknowledge or note the existence of variations to the standard method rules referenced in the associated RFF. 00300 FTX, Free text In the event of variations to the standard method rules this segment will provide any necessary narrative to explain the changes. 00310 Segment group 6: CUX-DTM-FTX Details of which currency rules apply to this group of items. 00320 CUX, Currencies Recording details of the currency that applies to the group of items being defined. 00330 DTM, Date/time/period This segment will be used to recorded any dates that are applicable to qualify the currency details recorded in CUX. 00340 FTX, Free text Any narrative necessary to explain or qualify the currency information. 00350 Segment group 7: ALC-RFF-DTM-RNG-FTX-SG8 A group of segments used to convey details of the price fluctuation calculations to be applied. 00360 ALC, Allowance or charge A segment to identity whether the data recorded in this segment group represents an actualization or a revision figure. 00370 RFF, Reference A segment providing a reference to the (usually standard) formula rules to be applied. 00380 DTM, Date/time/period A segment to record the contract base or control date to be used in the formula. 00390 RNG, Range details Where the formula makes reference to data within a range the details of the range will be identified in this segment. 00400 FTX, Free text A segment to convey the actual formula and narrative relating to the formula. This will be used only in the exceptional case of a non-standard formula being used. 00410 Segment group 8: PCD-RFF A group of segments to specify the remaining components of the price fluctuation calculation. 00420 PCD, Percentage details A segment to specify a percentage value to be used as a coefficient in conjunction with the reference given in the following RFF. 00430 RFF, Reference A segment to specify the reference of a work section applicable to a set of calculation components. 00440 Segment group 9: RCS-BII-FTX This segment group is used to record, in textual form, any terms and conditions that are deemed to apply to part or all of the group of items. 00450 RCS, Requirements and conditions The identity of the particular conditions that are to apply and a coded reference to denote whether this is to be added or changed etc. 00460 BII, Structure identification A structured index reference to identify to what range within the group of items the conditions apply. 00470 FTX, Free text The narrative description of the condition or term identified by this segment group. 00480 Segment group 10: ARD-MOA-FTX-SG11-SG12 This segment group is used to record any financial values that apply for a group of items. There are considerable number of different values and qualifiers that will apply. 00490 ARD, Monetary amount function A segment to record the qualifier to the financial value. This qualifier is in addition to the qualifier used within the following MOA segment. 00500 MOA, Monetary amount A segment to record the value of the monetary amount being defined. 00510 FTX, Free text Any narrative qualification necessary to complete the details about a financial value will be recorded in this segment. 00520 Segment group 11: TAX-MOA-LOC Where specific tax rules apply to the entire project or a grouping within the project they will be recorded in this segment group. 00530 TAX, Duty/tax/fee details Where the financial value being described within segment group 10 is a taxation or duty value, details of the tax or duty will be recorded here. 00540 MOA, Monetary amount A segment to specify the actual monetary amount of the tax or duty. 00550 LOC, Place/location identification A segment to specify any location details used to qualify the tax details. 00560 Segment group 12: ALC-ALI-SG13-SG14-SG15-SG16-SG17 Where it is necessary to express the components that contribute to a monetary value this segment group will be used. 00570 ALC, Allowance or charge A segment identifying the charge or allowance and where necessary it's calculation sequence. 00580 ALI, Additional information A segment indicating that the allowance or charge specified is subject to special conditions owing to origin, customs preference or commercial factors. 00590 Segment group 13: QTY-RNG Components of a financial value expressed in terms of quantities are recorded in this segment group. 00600 QTY, Quantity Any quantity details used to define or make precise the monetary value are recorded in this segment. 00610 RNG, Range details Details of the range that applies to the quantity components are expressed in this segment. 00620 Segment group 14: PCD-RNG Components of a financial value expressed in terms of a percentage are recorded in this segment group. 00630 PCD, Percentage details This segment is used where the financial information is expressed as a percentage or a percentage is required for further qualification. 00640 RNG, Range details Details of the range that applies to the percentage components are expressed in this segment. 00650 Segment group 15: MOA-RNG Any components of a monetary amount that are themselves expressed as monetary amounts are recorded in this segment group. 00660 MOA, Monetary amount The monetary amount component is recorded in this segment. 00670 RNG, Range details Details of the range that applies to the monetary amount components are expressed in this segment. 00680 Segment group 16: RTE-RNG Components of a financial value expressed in terms of a rate are recorded in this segment group. 00690 RTE, Rate details Any rate details used to define or make precise the monetary value are recorded in this segment. 00700 RNG, Range details Details of the range that applies to the rate components are expressed in this segment. 00710 Segment group 17: TAX-MOA Components of a financial value expressed in terms of a tax or duty are recorded in this segment group. 00720 TAX, Duty/tax/fee details Any tax details used to define or make precise the monetary value are recorded in this segment. 00730 MOA, Monetary amount A segment to specify the actual monetary amount of the tax or duty component. 00740 Segment group 18: NAD-LOC-FII-FTX-SG19-SG20-SG21 Name and address information relating to Parties, Banks and Contacts are recorded in this segment group. 00750 NAD, Name and address Company name and address that relate to this group of items and that have not been previously notified are recorded in this segment. Each name and address recorded is qualified by the use of the party qualifier 3035. 00760 LOC, Place/location identification A segment used to record more specific location information of the party specified in the NAD segment, e.g. a location within a construction site. 00770 FII, Financial institution information Bank details associated with these parties recorded in the preceding NAD segment are given here. 00780 FTX, Free text This segment allows for any narrative that may need to accompany the name and address information about a company. 00790 Segment group 19: RFF-DTM This group of segments will record unique reference numbers by which the party will be known and referenced. This will ensure that each party is uniquely identified even if there is more than one party with a similar qualifier. 00800 RFF, Reference Details of any unique referencing used within the project to identify the party. Not to be confused with the party qualifier in the NAD. 00810 DTM, Date/time/period Date and time details that are used to qualify the party reference number are recorded in this segment. 00820 Segment group 20: DOC-DTM This segment group is used to identify documentation related specifically to the party being defined. 00830 DOC, Document/message details The identity of the documentation is recorded in this segment. 00840 DTM, Date/time/period Date details used to qualify the documentation are recorded in this segment. 00850 Segment group 21: CTA-COM The information about who to contact within each of the parties detailed in this segment group. 00860 CTA, Contact information This segment will contain the identity of the individual, within a company, who is the contact point. 00870 COM, Communication contact Here is recorded the telephone number etc. that the contact can be reached via. 4.1.2 Detail section Information to be provided in the Detail section: 00880 UNS, Section control A service segment placed at the beginning of the detail section to avoid collision. 00890 Segment group 22: BII-RCS-GEI-SG23-SG24-SG25-SG27-SG30-SG31-SG32- SG34 A group of segments recording all the details that apply to an item. There can be many items within a project, details of all items, regardless of where they appear in the BoQ will be recorded in this segment group. 00900 BII, Structure identification A segment used to convey a structured index number that uniquely identifies each item recorded for the project. 00910 RCS, Requirements and conditions The action to be applied to this segment group data is recorded here. 00920 GEI, Processing information Through a list of coded qualifiers this segment is used to define precisely various features about this item e.g.: - it will distinguish between standard, work or sub item types. - identify whether this item is of an agreed, disputed or provisional status. - a qualification of the type of rate that has been associated with this item. - identifying to what category this item resides. 00930 Segment group 23: RFF-DTM A group of segments recording additional reference information against an item of work. 00940 RFF, Reference Where project documentation has been prepared in accordance with a Standard Methodology the item's reference to that Standard Method is recorded here. Also recorded here is the unique reference number assigned to a sub item. This reference would be used in conjunction with the item index no. in the BII of this segment group. 00950 DTM, Date/time/period A segment to record a date for the Standard Method of Measurement reference. 00960 Segment group 24: DIM-APR-FTX A group of segments which may be used where Segment Group 23 refers to a sub-item number. It would contain sets of dimension details to further describe the quantities. 00970 DIM, Dimensions A segment used to record where applicable, the length, width and height for portions of work measured. 00980 APR, Additional price information A segment to record a multiplication factor called "Timesing" that applies to a set of dimensions. 00990 FTX, Free text A segment to record an annotation for each set of dimensions. 01000 Segment group 25: LIN-SG26 A group of segments to record descriptive text for items and headings for groupings of items. 01010 LIN, Line item A segment to record a qualifier as to whether it is a description for an item or a heading for a group of items. This would also include a number identifying the level the description applies to, within a set of levelled headings. 01020 Segment group 26: IMD-RFF-GEI A group of segments to record the description line details together with text reference numbers and change action codes used to identify who is authorised to apply changes. 01030 IMD, Item description This segment is used to convey any descriptive material to be recorded for the item. This descriptive material can apply to the item description and item heading information. The distinction is explained in section 1.3 of this paper. 01040 RFF, Reference A segment used to record up to five text reference numbers per item description line. 01050 GEI, Processing information A segment used to record up to five text change action codes per item description line. 01060 Segment group 27: QTY-GEI-APR-SG28 This segment group is used to record the complex range of quantity values and prices that apply to an item. 01070 QTY, Quantity Many different quantity values can be applied to an item during it's execution. All of these quantities will be recorded in this segment. 01080 GEI, Processing information This segment is used to provide the qualifiers that apply to the various quantities in the previous segment. 01090 APR, Additional price information Item quantities are frequently accompanied by some multiplicands. This APR segment is used to record these. 01100 Segment group 28: PRI-GEI-SG29 A group of segments to record a series of prices and monetary amounts relating to each QTY value. 01110 PRI, Price details A segment to record up to three price values for each QTY value. 01120 GEI, Processing information A segment to record up to three qualifiers for each price. 01130 Segment group 29: ARD-MOA A group of segments to record the monetary amounts, currency, tax details resulting from the multiplication of QTY and PRI values. 01140 ARD, Monetary amount function A segment to qualify the monetary amount as to it's purpose in the business exchange. 01150 MOA, Monetary amount A segment to record the value and currency of the monetary amount. 01160 Segment group 30: TAX-MOA-LOC A group of segments in which is detailed taxation information, which applies to the item . There are often several different types of tax which need to be applied. 01170 TAX, Duty/tax/fee details Details of the taxation to be applied is recorded here. 01180 MOA, Monetary amount A segment to record the value and currency of the monetary amount. 01190 LOC, Place/location identification A segment to specify location codes relating to the tax details recorded in this segment group. 01200 Segment group 31: RCS-BII-GEI Where it is necessary to record a relationship about the current item and it's association with another item, this segment group will be used. 01210 RCS, Requirements and conditions A segment to identify the requirements that applied to this particular reference. 01220 BII, Structure identification Record here the structured index number of the other item to which the current item relates. 01230 GEI, Processing information This is the segment where a coded reference describing the item relationship is recorded. 01240 Segment group 32: ALC-RFF-DTM-RNG-FTX-SG33 A group of segments used to convey details of the price fluctuation calculations to be applied to the item. 01250 ALC, Allowance or charge A segment to identity whether the data recorded in this segment group represents an actualization or a revision figure. 01260 RFF, Reference A segment providing a reference to the (usually standard) formula rules to be applied. 01270 DTM, Date/time/period A segment to record the contract base or control date to be used in the formula. 01280 RNG, Range details Where the formula makes reference to data within a range the details of the range will be identified in this segment. 01290 FTX, Free text A segment to convey the actual formula and narrative relating to the formula . This will be used only in the exceptional case of a non- standard formula being used. 01300 Segment group 33: PCD-RFF A group of segments to specify the remaining components of the price fluctuation calculation. 01310 PCD, Percentage details A segment to specify a percentage value to be used as a coefficient in conjunction with the reference given in the following RFF. 01320 RFF, Reference A segment to specify the reference of a work section applicable to a set of calculation components. 01330 Segment group 34: IMD-QTY-MOA-PRI A segment group to record where necessary alternative index information for an item. The validity of an alternative index would be defined in the Segment Group 3 IMD. 01340 IMD, Item description A segment used to record an alternative index description (previously defined in Segment Group 3 IMD), that relates to this item. 01350 QTY, Quantity A segment to record the quantity and measurement unit that relates to the coded entry for the item. 01360 MOA, Monetary amount A segment to record the currency and value associated with the item. 01370 PRI, Price details A segment to record the monetary rate of the code associated with the item. 4.1.3 Summary section Information to be provided in the Summary section: 01380 CNT, Control total Various control total checks may be taken and the resultant values would be recorded in this segment. Typically these checks will be counts of quantity and monetary values that apply to the entire message. 01390 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) AGR Agreement identification ALC Allowance or charge ALI Additional information APR Additional price information ARD Monetary amount function AUT Authentication result BGM Beginning of message BII Structure identification CNT Control total COM Communication contact CTA Contact information CUX Currencies DIM Dimensions DOC Document/message details DTM Date/time/period FII Financial institution information FTX Free text GEI Processing information IMD Item description IND Index details LIN Line item LOC Place/location identification MOA Monetary amount NAD Name and address PCD Percentage details PRI Price details QTY Quantity RCS Requirements and conditions RFF Reference RNG Range details RTE Rate details TAX Duty/tax/fee details UNH Message header UNS Section control UNT Message trailer
4.3 Message structure 4.3.1 Segment table Pos Tag Name S R HEADER SECTION 00010 UNH Message header M 1 00020 BGM Beginning of message M 1 00030 RFF Reference M 1 00040 DTM Date/time/period M 1 00050 AUT Authentication result C 2 00060 AGR Agreement identification C 2 00070 ---- Segment group 1 ------------------ C 1000-------------+ 00080 IND Index details M 1 | 00090 RCS Requirements and conditions M 1 | | 00100 ---- Segment group 2 ------------------ M 1---------------+| 00110 GEI Processing information M 1 || || 00120 ---- Segment group 3 ------------------ M 1--------------+|| 00130 BII Structure identification M 1 ||| 00140 IMD Item description M 9--------------+++ 00150 ---- Segment group 4 ------------------ C 1000-------------+ 00160 BII Structure identification M 1 | 00170 RCS Requirements and conditions M 1 | 00180 GEI Processing information M 10 | 00190 NAD Name and address C 1 | 00200 LOC Place/location identification C 1 | 00210 APR Additional price information C 1 | 00220 ALI Additional information C 2 | 00230 QTY Quantity C 5 | 00240 DTM Date/time/period C 10 | 00250 RTE Rate details C 9 | | 00260 ---- Segment group 5 ------------------ C 10--------------+| 00270 RFF Reference M 1 || 00280 DTM Date/time/period C 2 || 00290 GEI Processing information C 5 || 00300 FTX Free text C 5---------------+| | 00310 ---- Segment group 6 ------------------ C 5---------------+| 00320 CUX Currencies M 1 || 00330 DTM Date/time/period C 5 || 00340 FTX Free text C 1---------------+| | 00350 ---- Segment group 7 ------------------ C 2---------------+| 00360 ALC Allowance or charge M 1 || 00370 RFF Reference C 1 || 00380 DTM Date/time/period C 1 || 00390 RNG Range details C 1 || 00400 FTX Free text C 10 || || 00410 ---- Segment group 8 ------------------ C 20-------------+|| 00420 PCD Percentage details M 1 ||| 00430 RFF Reference C 1--------------++| | 00440 ---- Segment group 9 ------------------ C 100-------------+| 00450 RCS Requirements and conditions M 1 || 00460 BII Structure identification M 1 || 00470 FTX Free text C 9---------------+| | 00480 ---- Segment group 10 ------------------ M 100-------------+| 00490 ARD Monetary amount function M 1 || 00500 MOA Monetary amount M 6 || 00510 FTX Free text C 10 || || 00520 ---- Segment group 11 ------------------ C 5--------------+|| 00530 TAX Duty/tax/fee details M 1 ||| 00540 MOA Monetary amount C 1 ||| 00550 LOC Place/location identification C 5--------------+|| || 00560 ---- Segment group 12 ------------------ C 15-------------+|| 00570 ALC Allowance or charge M 1 ||| 00580 ALI Additional information C 5 ||| ||| 00590 ---- Segment group 13 ------------------ C 1-------------+||| 00600 QTY Quantity M 1 |||| 00610 RNG Range details C 1-------------+||| ||| 00620 ---- Segment group 14 ------------------ C 1-------------+||| 00630 PCD Percentage details M 1 |||| 00640 RNG Range details C 1-------------+||| ||| 00650 ---- Segment group 15 ------------------ C 1-------------+||| 00660 MOA Monetary amount M 1 |||| 00670 RNG Range details C 1-------------+||| ||| 00680 ---- Segment group 16 ------------------ C 1-------------+||| 00690 RTE Rate details M 1 |||| 00700 RNG Range details C 1-------------+||| ||| 00710 ---- Segment group 17 ------------------ C 5-------------+||| 00720 TAX Duty/tax/fee details M 1 |||| 00730 MOA Monetary amount C 1-------------+++| | 00740 ---- Segment group 18 ------------------ C 20--------------+| 00750 NAD Name and address M 1 || 00760 LOC Place/location identification C 25 || 00770 FII Financial institution information C 9 || 00780 FTX Free text C 5 || || 00790 ---- Segment group 19 ------------------ C 5--------------+|| 00800 RFF Reference M 1 ||| 00810 DTM Date/time/period C 5--------------+|| || 00820 ---- Segment group 20 ------------------ C 5--------------+|| 00830 DOC Document/message details M 1 ||| 00840 DTM Date/time/period C 5--------------+|| || 00850 ---- Segment group 21 ------------------ C 5--------------+|| 00860 CTA Contact information M 1 ||| 00870 COM Communication contact C 5--------------+++ DETAIL SECTION 00880 UNS Section control M 1 00890 ---- Segment group 22 ------------------ M 1000-------------+ 00900 BII Structure identification M 1 | 00910 RCS Requirements and conditions M 1 | 00920 GEI Processing information M 10 | | 00930 ---- Segment group 23 ------------------ C 10--------------+| 00940 RFF Reference M 1 || 00950 DTM Date/time/period C 1---------------+| | 00960 ---- Segment group 24 ------------------ C 100-------------+| 00970 DIM Dimensions M 1 || 00980 APR Additional price information C 1 || 00990 FTX Free text C 1---------------+| | 01000 ---- Segment group 25 ------------------ C 100-------------+| 01010 LIN Line item M 1 || || 01020 ---- Segment group 26 ------------------ C 1000-----------+|| 01030 IMD Item description M 1 ||| 01040 RFF Reference C 5 ||| 01050 GEI Processing information C 5--------------++| | 01060 ---- Segment group 27 ------------------ M 1000------------+| 01070 QTY Quantity M 1 || 01080 GEI Processing information C 3 || 01090 APR Additional price information C 1 || || 01100 ---- Segment group 28 ------------------ C 3--------------+|| 01110 PRI Price details M 1 ||| 01120 GEI Processing information M 3 ||| ||| 01130 ---- Segment group 29 ------------------ C 2-------------+||| 01140 ARD Monetary amount function M 1 |||| 01150 MOA Monetary amount C 1-------------+++| | 01160 ---- Segment group 30 ------------------ C 5---------------+| 01170 TAX Duty/tax/fee details M 1 || 01180 MOA Monetary amount C 1 || 01190 LOC Place/location identification C 5---------------+| | 01200 ---- Segment group 31 ------------------ C 5---------------+| 01210 RCS Requirements and conditions M 1 || 01220 BII Structure identification M 1 || 01230 GEI Processing information M 1---------------+| | 01240 ---- Segment group 32 ------------------ C 2---------------+| 01250 ALC Allowance or charge M 1 || 01260 RFF Reference C 1 || 01270 DTM Date/time/period C 1 || 01280 RNG Range details C 1 || 01290 FTX Free text C 10 || || 01300 ---- Segment group 33 ------------------ C 20-------------+|| 01310 PCD Percentage details M 1 ||| 01320 RFF Reference C 1--------------++| | 01330 ---- Segment group 34 ------------------ C 9---------------+| 01340 IMD Item description M 1 || 01350 QTY Quantity C 1 || 01360 MOA Monetary amount C 1 || 01370 PRI Price details C 1---------------++ SUMMARY SECTION 01380 CNT Control total C 10 01390 UNT Message trailer M 1