United Nations Directories
for Electronic Data Interchange for
Administration, Commerce and Transport



 UN/EDIFACT

Message Type : DESADV Version : D Release : 21A Contr. Agency: UN Revision : 14 Date : 2021-06-10 SOURCE: TBG1 Supply Chain CONTENTS Despatch advice message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.1.1 Header section 4.1.2 Detail section 4.1.3 Summary section 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table --------------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction --------------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Despatch advice message (DESADV) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE This paper provides the definition of the United Nations Standard Despatch Advice message to be used in Electronic Data Interchange (EDI) between trading partners. 1.1 Functional definition A message specifying details for goods despatched or ready for despatch under agreed conditions. The United Nations Despatch Advice Message serves both as a specification for Delivery Despatch Advice and also as a Returns Despatch Advice message. Throughout this document, the reference to 'Despatch Advice' may be interpreted as conveying the wider meaning of 'Delivery Despatch Advice/Returns Despatch Advice'. 1.2 Field of application The Despatch advice message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles The message intent is to advise of the detailed contents of a consignment. The message relates to one seller and one buyer or their respective agents. The message relates to a single despatch point and single or multiple destination points. It may cover a number of different items or packages. It allows the recipient to: - know when the material has been despatched or will be ready for despatch - have the precise details of the consignment - take initial steps towards Customs clearance in the case of international consignments - enable matching between despatched goods and the following invoice. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. The following guidelines and principles apply to the whole message and are intended to facilitate the understanding and implementation of the message: All specified dates/times should be in the format 'ccyymmdd'/'hhmm' unless all parties involved in the transaction agree that there is a functional requirement for an alternative format. Periods should be specified as whole numbers representing the required period as indicated in the format qualifier (weeks, months, etc.). Where a choice of code or text is given only the code element should be used. Conditional data that is not required in the message should be omitted. Care must be taken that the segment qualifier in dependent segments does not conflict with the segment qualifier of the trigger segment of a group. Free text information within the message should be avoided as this inhibits automatic processing. 4.1.1 Header section Information to be provided in the Header section: 00010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Despatch advice message is DESADV. Note: Despatch advice messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 DESADV 0052 D 0054 21A 0051 UN 00020 BGM, Beginning of message A segment for unique identification of the Despatch Advice document, by means of its name and its number. 00030 DTM, Date/time/period Date/time/period related to the whole message. The DTM segment must be specified at least once to identify the Despatch Advice date. 00040 ALI, Additional information A segment indicating that the message is subject to special conditions due to origin, customs preference or commercial factors. 00050 MEA, Measurements A segment specifying the weight and volume of the consignment. 00060 MOA, Monetary amount A segment to transmit monetary amounts for the whole despatch required by the consignee to prepare customs clearance procedures. 00070 CUX, Currencies This segment is used to specify currencies and relevant details for the rate of exchange. 00080 Segment group 1: RFF-DTM A group of segments giving references where necessary, their dates relating to the whole message, e.g. contract number. 00090 RFF, Reference A segment for referencing documents relating to the whole despatch advice message, e.g. purchase orders, delivery instructions, import/export license. 00100 DTM, Date/time/period Date/time/period from the referred document. 00110 Segment group 2: NAD-LOC-SG3-SG4 A group of segments identifying names, addresses, locations, and required supporting documents relevant to the whole Despatch Advice. 00120 NAD, Name and address A segment for identifying names, addresses, and their functions relevant to the whole Despatch Advice. Identification of the parties involved is recommended for the Despatch Advice message, and is to be given in the NAD segment. It is recommended that where possible, only the coded form of the party ID should be specified, e.g. the buyer and seller are known to each other, thus only the coded ID is required. The consignee or delivery address may vary and would have to be clearly specified, preferably in structured format. 00130 LOC, Place/location identification A segment indicating more details regarding specific places/locations related to the party specified in the NAD segment, e.g. internal site/building number. 00140 Segment group 3: RFF-DTM A group of segments giving references relevant only to the specified party rather than the whole message. 00150 RFF, Reference A segment for referencing documents relating to the party specified by the NAD segment. 00160 DTM, Date/time/period A segment for specifying Date/time/period of the referred document. 00170 Segment group 4: CTA-COM A group of segments to identify the people, functions, departments and appropriate numbers to whom communication should be directed. 00180 CTA, Contact information A segment to identify the person, function or department to whom communication should be directed. 00190 COM, Communication contact A segment to identify communication types and numbers for the person, function or department identified in the CTA. 00200 Segment group 5: TOD-LOC-FTX A group of segments indicating terms of delivery. 00210 TOD, Terms of delivery or transport A segment indicating the terms of delivery and transfer for the whole despatch advice. 00220 LOC, Place/location identification A segment indicating locations relevant to the TOD segment. 00230 FTX, Free text Additional free text pertinent to terms of delivery. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 00240 Segment group 6: TDT-PCD-TMD-SG7 A group of segments specifying details of the mode, means and method of transport and date/time of departure and destination relevant to the whole despatch advice. 00250 TDT, Transport information A segment specifying the carriage, and the mode and means of transport of the goods being despatched. 00260 PCD, Percentage details A segment specifying the percentage of utilization of the capacity of the means of transport. 00270 TMD, Transport movement details A segment to specify transport movement details for a despatch. 00280 Segment group 7: LOC-DTM A group of segments giving the location and date/time information relative to the transportation. 00290 LOC, Place/location identification A segment indicating locations relevant to the transport specified in the TDT segment. 00300 DTM, Date/time/period A segment giving the date/time/period information of departure and/or arrival of the transported goods for the specified location. 00310 Segment group 8: EQD-MEA-SEL-EQA-SG9 A group of segments providing information relative to the equipment used for the transportation of goods relevant to the whole despatch advice. 00320 EQD, Equipment details A segment to define fixed information regarding equipment used in conjunction with the whole despatch advice, and if required, to indicate responsibility for supply of the equipment. 00330 MEA, Measurements A segment specifying physical measurements of equipment described in the EQD segment. 00340 SEL, Seal number A segment specifying a seal number connected to a specific equipment named in the EQD. 00350 EQA, Attached equipment A segment identifying equipment either attached to the equipment described in the EQD segment above, or equipment related to that described in the EQD segment, and which is further defined in a subsequent EQD segment. 00360 Segment group 9: HAN-FTX A group of segments providing information on hazardous goods and their handling. 00370 HAN, Handling instructions A segment providing information on handling and notification of hazardous materials in the specified equipment. 00380 FTX, Free text A segment with free text information in coded or clear form to give further clarification, when required, for hazardous material. 00390 Segment group 10: EFI-CED-COM-RFF-DTM-QTY A group of segments that refers through an external file identification to each of the external files and giving additional information about each of the files. 00400 EFI, External file link identification This segment will identify the external files by indicating the file name, file number and its sequence number in an exchange. 00410 CED, Computer environment details To give precise definitions of all necessary elements belonging to the configuration of a computer system, e.g. hardware, firmware, operating system, communication and application software. 00420 COM, Communication contact To identify a communication number of a department or a person to whom communication should be directed. 00430 RFF, Reference A segment giving reference related to the file identified by a previous external file link identification segment. 00440 DTM, Date/time/period This segment will convey the date/time details of the external file. 00450 QTY, Quantity The size/volume of the external file identified in the previous external file link identification segment. 4.1.2 Detail section Information to be provided in the Detail section: 00460 Segment group 11: CPS-FTX-QVR-SG12-SG19 A group of segments providing details of all package levels and of the individual despatched items contained in the consignment. This segment group provides the capability to give the hierarchical packing relationships. The group defines a logical top-down order structure. The lowest level package information of the hierarchy is followed by the detail product information. 00470 CPS, Consignment packing sequence A segment identifying the sequence in which packing of the consignment occurs, e.g. boxes loaded onto a pallet. 00480 FTX, Free text A segment with free text information in coded or clear form to give further clarification, when required, as to the packing sequence. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 00490 QVR, Quantity variances A segment identifying a quantity variance and reason for the variance. 00500 Segment group 12: PAC-MEA-QTY-SG13-SG14-SG18 A group of segments identifying packaging, physical dimensions, marks and numbers, quantities, date and time information, handling information and information about packing at this level. 00510 PAC, Package A segment specifying the number and type of the packages/physical units and the physical type of packaging for the despatched goods. 00520 MEA, Measurements A segment specifying physical measurements of the packages/physical units described in the PAC segment. 00530 QTY, Quantity A segment to specify the quantity per package described in the PAC segment. 00540 Segment group 13: HAN-FTX A group of segments providing information on hazardous goods and handling. 00550 HAN, Handling instructions A segment providing information on required handling and notification of hazardous materials in the specified package. 00560 FTX, Free text A segment with free text information in coded or clear form to give further clarification, when required, for hazardous materials. 00570 Segment group 14: PCI-RFF-DTM-SG15-SG16-SG17 A group of segments specifying markings, labels, and packing numbers. 00580 PCI, Package identification A segment specifying markings and/or labels used on individual physical units (packages) described in the PAC segment. 00590 RFF, Reference A segment for referencing the package identification e.g. master label number. 00600 DTM, Date/time/period A segment for specifying date/time/period related to the document referenced. 00610 Segment group 15: GIR-DTM A group of segments to give specific package related identifications and dates. 00620 GIR, Related identification numbers To specify a set of related identification numbers. 00630 DTM, Date/time/period A segment to give specific dates of a package, e.g. production date, etc. 00640 Segment group 16: GIN-DLM A group of segments giving package identification numbers and, where relevant, delivery limitation information. 00650 GIN, Goods identity number A segment providing the identity numbers of packages being despatched. 00660 DLM, Delivery limitations A segment to identify any limitation on delivery of goods, e.g. hold until final approval by supplier. 00670 Segment group 17: COD-MEA-QTY-PCD A group of segments to indicate the ingredients of the packaging used to pack a product and to provide the quantity of material used in this actual packaging. This group needs to be repeated for the ingredients as relevant. 00680 COD, Component details A segment to identify the ingredients used for packaging. 00690 MEA, Measurements A segment to give the measurements of the identified ingredient as used for packaging. 00700 QTY, Quantity A segment to give the quantity of the identified ingredient as used for packaging. 00710 PCD, Percentage details A segment to give the percentage of the ingredient within the packaging material. 00720 Segment group 18: EFI-CED-COM-RFF-DTM-QTY A group of segments that refers through an external file identification to each of the external files and giving additional information about each of the files. 00730 EFI, External file link identification This segment will identify the external files by indicating the file name, file number and its sequence number in an exchange. 00740 CED, Computer environment details To give precise definitions of all necessary elements belonging to the configuration of a computer system, e.g. application software. 00750 COM, Communication contact To identify a communication number of a department or a person to whom communication should be directed. 00760 RFF, Reference A segment giving reference related to the file identified by a previous external file link identification segment. 00770 DTM, Date/time/period This segment will convey the date/time details of the external file. 00780 QTY, Quantity The size/volume of the external file identified in the previous external file link identification segment. 00790 Segment group 19: LIN-PIA-IMD-MEA-QTY-ALI-GIN-GIR-DLM-DTM-NAD- TDT-TMD-HAN-FTX-MOA-PAC-SG20-SG21-SG22-SG23- SG24-SG27-SG28 A group of segments providing details of the individual despatched items. 00800 LIN, Line item A segment identifying the product being despatched. All other segments in the detail section following the LIN segment refer to that line item. 00810 PIA, Additional product id A segment providing additional product identification. 00820 IMD, Item description A segment for describing the product being despatched. This segment should be used for products that cannot be identified by a product code or article number. 00830 MEA, Measurements A segment specifying physical measurements of the despatched item in original or unpacked form. 00840 QTY, Quantity A segment to give quantity information concerning the product. 00850 ALI, Additional information A segment indicating that the line item is subject to special conditions due to origin, customs preference, or commercial factors. 00860 GIN, Goods identity number A segment providing identity numbers of the goods being despatched, e.g. serial numbers for assembled equipment. 00870 GIR, Related identification numbers A segment providing sets of related identification numbers for a line item, e.g. engine number, chassis number and transmission number for a vehicle. 00880 DLM, Delivery limitations A segment to identify any limitation on delivery of goods e.g. hold until final approval by supplier. 00890 DTM, Date/time/period A segment providing date, time information related to the line item, e.g. production date. 00900 NAD, Name and address A segment for identifying names and addresses and their functions relevant to the item, e.g. manufacturer. 00910 TDT, Transport information A segment specifying the carriage, and the mode and means of transport of the goods being despatched, e.g. shipment/consignment number, shipping method, carrier. 00920 TMD, Transport movement details A segment to specify transport movement details for a despatched item. 00930 HAN, Handling instructions A segment providing information on the handling and notification of hazardous materials. 00940 FTX, Free text A segment with free text information in coded or clear form to give further clarification, when required, to the line item. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 00950 MOA, Monetary amount A segment giving monetary amounts required by the consignee to undertake customs clearance procedures. 00960 PAC, Package Segment giving information related to the instruction for the type of packaging which is valid for the specified deliveries of the line item. 00970 Segment group 20: RFF-NAD-CTA-DTM A group of segments to give reference numbers and dates. 00980 RFF, Reference A segment identifying documents related to the line item. 00990 NAD, Name and address A segment for identifying names and addresses and their functions relevant to the originator of the document in the RFF segment. 01000 CTA, Contact information A segment to identify the office, branch or department to whom communication relevant to the document should be directed. 01010 DTM, Date/time/period A segment for date/time/period relative to the referred document. 01020 Segment group 21: DGS-QTY-FTX A group of segments giving information about dangerous goods. 01030 DGS, Dangerous goods A segment to indicate the class of dangerous goods. 01040 QTY, Quantity A segment to specify quantity of the given dangerous goods. 01050 FTX, Free text A segment to describe dangerous goods. 01060 Segment group 22: LOC-NAD-DTM-QTY A group of segments giving location information and where relevant, additional addresses, date and time, and quantities. 01070 LOC, Place/location identification A segment identifying a specific location to which products will be delivered. 01080 NAD, Name and address A segment for identifying names and addresses and their functions relevant to the delivery point. It is recommended that where possible only the coded form of the party ID should be specified, e.g. the buyer and seller are known to each other, thus only the coded ID is required. The consignee or delivery address may vary and would have to be clearly specified, preferably in structured format. 01090 DTM, Date/time/period A segment providing date/time information relevant for delivery to the specific location. 01100 QTY, Quantity A segment to specify quantity for the given location. 01110 Segment group 23: SGP-QTY A group of segments indicating the split placement of packages or unpacked goods into equipment. 01120 SGP, Split goods placement A segment to specify the placement of goods in relation to one equipment. If goods are unpacked, their quantity would be given in the following QTY segment. 01130 QTY, Quantity A segment to specify the quantity of unpacked goods being placed in a specific equipment. 01140 Segment group 24: PCI-DTM-MEA-QTY-SG25-SG26 A group of segments identifying one specific package or a number of packages, their marks and numbers, measurements, quantities, date and time information and handling instructions. 01150 PCI, Package identification A segment specifying marking and labels used on individual packages or a range of packages. 01160 DTM, Date/time/period A segment giving the date/time details related to the goods within the packages e.g. expiration date. 01170 MEA, Measurements A segment specifying physical measurements of packages. 01180 QTY, Quantity A segment to specify quantity per package. 01190 Segment group 25: GIN-DLM A group of segments giving package identification numbers and, where relevant, delivery limitation information. 01200 GIN, Goods identity number A segment providing identification numbers being applied to the packages despatched. 01210 DLM, Delivery limitations A segment to identify any limitation on delivery of goods e.g. hold until final approval by supplier. 01220 Segment group 26: HAN-FTX-GIN A group of segment providing information on hazardous materials and handling. 01230 HAN, Handling instructions A segment providing information on handling and notification of hazardous materials. 01240 FTX, Free text A segment with free text information in coded or clear form to give further clarification, when required, for hazardous materials. 01250 GIN, Goods identity number A segment providing identification numbers being applied to the packages containing hazardous goods. 01260 Segment group 27: QVR-DTM A group of segments identifying quantity variances, the reason for the variance, and, when relevant, date and time information. 01270 QVR, Quantity variances A segment identifying a quantity variance and the reason for the variance. 01280 DTM, Date/time/period A segment to give date and time information relative to the quantity variances, e.g. proposed delivery date on the back order. 01290 Segment group 28: EFI-CED-COM-RFF-DTM-QTY A group of segments that refers through an external file identification to each of the external files and giving additional information about each of the files. 01300 EFI, External file link identification This segment will identify the external files by indicating the file name, file number and its sequence number in an exchange. 01310 CED, Computer environment details To give precise definitions of all necessary elements belonging to the configuration of a computer system, e.g. hardware, firmware, operating system, communication and application software. 01320 COM, Communication contact To identify a communication number of a department or a person to whom communication should be directed. 01330 RFF, Reference A segment giving reference related to the file identified by a previous external file link identification segment. 01340 DTM, Date/time/period This segment will convey the date/time details of the external file. 01350 QTY, Quantity The size/volume of the external file identified in the previous external file link identification segment. 4.1.3 Summary section Information to be provided in the Summary section: 01360 CNT, Control total A segment by which control totals may be provided by sender for checking by the receiver. 01370 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) ALI Additional information BGM Beginning of message CED Computer environment details CNT Control total COD Component details COM Communication contact CPS Consignment packing sequence CTA Contact information CUX Currencies DGS Dangerous goods DLM Delivery limitations DTM Date/time/period EFI External file link identification EQA Attached equipment EQD Equipment details FTX Free text GIN Goods identity number GIR Related identification numbers HAN Handling instructions IMD Item description LIN Line item LOC Place/location identification MEA Measurements MOA Monetary amount NAD Name and address PAC Package PCD Percentage details PCI Package identification PIA Additional product id QTY Quantity QVR Quantity variances RFF Reference SEL Seal number SGP Split goods placement TDT Transport information TMD Transport movement details TOD Terms of delivery or transport UNH Message header UNT Message trailer

4.3 Message structure 4.3.1 Segment table Pos Tag Name S R HEADER SECTION 00010 UNH Message header M 1 00020 BGM Beginning of message M 1 00030 DTM Date/time/period C 10 00040 ALI Additional information C 5 00050 MEA Measurements C 5 00060 MOA Monetary amount C 5 00070 CUX Currencies C 9 00080 ---- Segment group 1 ------------------ C 99---------------+ 00090 RFF Reference M 1 | 00100 DTM Date/time/period C 9----------------+ 00110 ---- Segment group 2 ------------------ C 99---------------+ 00120 NAD Name and address M 1 | 00130 LOC Place/location identification C 10 | | 00140 ---- Segment group 3 ------------------ C 99--------------+| 00150 RFF Reference M 1 || 00160 DTM Date/time/period C 99--------------+| | 00170 ---- Segment group 4 ------------------ C 10--------------+| 00180 CTA Contact information M 1 || 00190 COM Communication contact C 5---------------++ 00200 ---- Segment group 5 ------------------ C 10---------------+ 00210 TOD Terms of delivery or transport M 1 | 00220 LOC Place/location identification C 9999 | 00230 FTX Free text C 5----------------+ 00240 ---- Segment group 6 ------------------ C 10---------------+ 00250 TDT Transport information M 1 | 00260 PCD Percentage details C 6 | 00270 TMD Transport movement details C 1 | | 00280 ---- Segment group 7 ------------------ C 10--------------+| 00290 LOC Place/location identification M 1 || 00300 DTM Date/time/period C 10--------------++ 00310 ---- Segment group 8 ------------------ C 10---------------+ 00320 EQD Equipment details M 1 | 00330 MEA Measurements C 5 | 00340 SEL Seal number C 25 | 00350 EQA Attached equipment C 5 | | 00360 ---- Segment group 9 ------------------ C 10--------------+| 00370 HAN Handling instructions M 1 || 00380 FTX Free text C 10--------------++ 00390 ---- Segment group 10 ------------------ C 99---------------+ 00400 EFI External file link identification M 1 | 00410 CED Computer environment details C 99 | 00420 COM Communication contact C 9 | 00430 RFF Reference C 9 | 00440 DTM Date/time/period C 9 | 00450 QTY Quantity C 9----------------+ DETAIL SECTION 00460 ---- Segment group 11 ------------------ C 9999-------------+ 00470 CPS Consignment packing sequence M 1 | 00480 FTX Free text C 5 | 00490 QVR Quantity variances C 9 | | 00500 ---- Segment group 12 ------------------ C 9999------------+| 00510 PAC Package M 1 || 00520 MEA Measurements C 10 || 00530 QTY Quantity C 10 || || 00540 ---- Segment group 13 ------------------ C 10-------------+|| 00550 HAN Handling instructions M 1 ||| 00560 FTX Free text C 10-------------+|| || 00570 ---- Segment group 14 ------------------ C 1000-----------+|| 00580 PCI Package identification M 1 ||| 00590 RFF Reference C 1 ||| 00600 DTM Date/time/period C 5 ||| ||| 00610 ---- Segment group 15 ------------------ C 99------------+||| 00620 GIR Related identification numbers M 1 |||| 00630 DTM Date/time/period C 5-------------+||| ||| 00640 ---- Segment group 16 ------------------ C 99------------+||| 00650 GIN Goods identity number M 1 |||| 00660 DLM Delivery limitations C 10------------+||| ||| 00670 ---- Segment group 17 ------------------ C 99------------+||| 00680 COD Component details M 1 |||| 00690 MEA Measurements C 9 |||| 00700 QTY Quantity C 9 |||| 00710 PCD Percentage details C 9-------------++|| || 00720 ---- Segment group 18 ------------------ C 99-------------+|| 00730 EFI External file link identification M 1 ||| 00740 CED Computer environment details C 99 ||| 00750 COM Communication contact C 9 ||| 00760 RFF Reference C 9 ||| 00770 DTM Date/time/period C 9 ||| 00780 QTY Quantity C 9--------------++| | 00790 ---- Segment group 19 ------------------ C 9999------------+| 00800 LIN Line item M 1 || 00810 PIA Additional product id C 10 || 00820 IMD Item description C 99 || 00830 MEA Measurements C 10 || 00840 QTY Quantity C 10 || 00850 ALI Additional information C 10 || 00860 GIN Goods identity number C 100 || 00870 GIR Related identification numbers C 100 || 00880 DLM Delivery limitations C 100 || 00890 DTM Date/time/period C 5 || 00900 NAD Name and address C 99 || 00910 TDT Transport information C 1 || 00920 TMD Transport movement details C 1 || 00930 HAN Handling instructions C 20 || 00940 FTX Free text C 99 || 00950 MOA Monetary amount C 5 || 00960 PAC Package C 9 || || 00970 ---- Segment group 20 ------------------ C 99-------------+|| 00980 RFF Reference M 1 ||| 00990 NAD Name and address C 1 ||| 01000 CTA Contact information C 1 ||| 01010 DTM Date/time/period C 1--------------+|| || 01020 ---- Segment group 21 ------------------ C 9999-----------+|| 01030 DGS Dangerous goods M 1 ||| 01040 QTY Quantity C 1 ||| 01050 FTX Free text C 5--------------+|| || 01060 ---- Segment group 22 ------------------ C 100------------+|| 01070 LOC Place/location identification M 1 ||| 01080 NAD Name and address C 1 ||| 01090 DTM Date/time/period C 1 ||| 01100 QTY Quantity C 10-------------+|| || 01110 ---- Segment group 23 ------------------ C 1000-----------+|| 01120 SGP Split goods placement M 1 ||| 01130 QTY Quantity C 10-------------+|| || 01140 ---- Segment group 24 ------------------ C 9999-----------+|| 01150 PCI Package identification M 1 ||| 01160 DTM Date/time/period C 5 ||| 01170 MEA Measurements C 10 ||| 01180 QTY Quantity C 1 ||| ||| 01190 ---- Segment group 25 ------------------ C 10------------+||| 01200 GIN Goods identity number M 1 |||| 01210 DLM Delivery limitations C 100-----------+||| ||| 01220 ---- Segment group 26 ------------------ C 10------------+||| 01230 HAN Handling instructions M 1 |||| 01240 FTX Free text C 5 |||| 01250 GIN Goods identity number C 1000----------++|| || 01260 ---- Segment group 27 ------------------ C 10-------------+|| 01270 QVR Quantity variances M 1 ||| 01280 DTM Date/time/period C 5--------------+|| || 01290 ---- Segment group 28 ------------------ C 99-------------+|| 01300 EFI External file link identification M 1 ||| 01310 CED Computer environment details C 99 ||| 01320 COM Communication contact C 9 ||| 01330 RFF Reference C 9 ||| 01340 DTM Date/time/period C 9 ||| 01350 QTY Quantity C 9--------------+++ SUMMARY SECTION 01360 CNT Control total C 5 01370 UNT Message trailer M 1

Copyright United Nations, all rights reserved
 
UN Economic Commission for Europe
Palais des Nations, CH-1211 Geneva 10, Switzerland
Tel: +41-22 917 1366 Fax: +41-22 917 0037 E-mail: TradeMaster@unece.org
 
UN/EDIFACT Directories