United Nations Directories
for Electronic Data Interchange for
Administration, Commerce and Transport



 UN/EDIFACT

Message Type : ITRRPT Version : D Release : 21B Contr. Agency: UN Revision : 4 Date : 2021-11-15 SOURCE: TBG1 Supply Chain CONTENTS In transit report detail message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.1.1 Header section 4.1.2 Detail section 4.1.3 Summary section 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table --------------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction --------------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the In transit report detail message (ITRRPT) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE 1.1 Functional definition A message specifying to a delivery party, the details of goods within grouped consignments despatched by the delivering party. This message is used in a multi-step transportation process involving only consignors, grouping centres and consignees. A grouping centre (consolidation point) is a logistic point where goods are moved from one means of transport to another, to optimize transport cost. This message is not to be used to identify additional services related to the despatched goods (warehousing, packaging, etc.) which may be provided by the third party at the same location along with the Grouping service. 1.2 Field of application The In transit report detail message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles An In Transit Report Detail message always relates to one or many Despatch Advice messages sent to the parties concerned. This message refers to the goods identified in the referenced Despatch Advice messages When the recipient of the message is a grouping centre the message allows the grouping centre to consolidate consignments received from one or more original consignors or other grouping centres and despatch them to another grouping centre or to the consignee. When the recipient of the message is the consignee, it allows the consignee to match this message with the corresponding Despatch Advice messages already received from the consignor(s). In case of differences, the message allows the consignee to identify variances caused by a split consignment or by missing goods. The Cargo/goods handling and movement message (HANMOV) has been designed to identify additional handling services related to the despatched goods, such as storage or (re-)packaging. An ITRRPT message specifies the details of despatched goods (possibly re-grouped), corresponding to one or more original despatch advices; the references to the consignment(s) by which they transported can be included (the seller's and buyer's perspective). The message does not necessarily provide full consignment details as required for transport purposes ( the carrier's perspective). The message refers to goods despatched on a single unit of transport (e.g. a single truck, a single railway wagon etc.). The sender of the message may be: . The consignor; in this case the message may refer to several buyers and consignees, but to only one seller. . A grouping centre; in this case the message may refer to several buyers, consignors, consignees and sellers. The recipient of the message may be: . A grouping centre; in this case the message may refer to several sellers, consignors, consignees and buyers. . The consignee; in this case the message may refer to several sellers, but only one buyer and one consignee. The following diagram illustrates the information flows. INFORMATION FLOWS +--------------------------------->---------------------------+ | DESADV 1 | | DESADV 2 | | +---------->----------------------------+ | | | -----------------------------------+| | | | | DESADV 3 +---------->----+|| | | | | | DESADV 4 ||| | +------------+ +---|---|----+ +------------+ ||| | | consignor 1| | consignor 2| +--| consignor 3| ||| | +------------+ +------------+ | +------------+ ||| | | | | | ||| | ITRRPT a ITRRPT b ITRRPT c DESADV 5 ||| | | | | | ||| | (DESADV1) (DESADV2+3) (DESADV4+5) | ||| | | | +---<----+ | ||| | | +-----------------+ +-----------+ ||| | | |GROUPING CENTER 1| |CONSIGNEE | ||| | | +-----------------+ |FACTORY 1 | ||| | V | | +-----------+ ||| | | | | | ||| | | ITRRPT d +-------------->+ ||| | | (DES|ADV2+3+4) ITRRPT e ||| | | V (DESADV 5) ||| | +-----------------+ +------------+ ||| | |GROUPING CENTER 2|--------------->----| CONSIGNEE |--<--+|| | +-----------------+ ITRRPT f | FACTORY 2 |--<---+| | | (DESADV3+4) +------------+ | | | | | | +-------------+ | | +------------------->-------------|CONSIGNEE | | | ITRRPT a |ADVANCED |--<---+ | (DESADV1+2) |WAREHOUSE 3 |--<-----+ +-------------+ Remarks; - The indication (DESADVn) below ITRRPT n indicates that the ITRRPT message match the corresponding DESADV directly sent to the consignee. - The material flow corresponds to the ITRRPT message flow. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. The following guidelines and principles apply to the whole message and are intended to facilitate the understanding and implementation of the message: All specified dates/times should be in the format 'ccyymmdd'/'hhmm' unless all parties involved in the transaction agree that there is a functional requirement for an alternative format. Periods should be specified as whole numbers representing the required period as indicated in the format qualifier (weeks, months, etc.) Where a choice of code or text is given only the code element should be used wherever possible. Care must be taken to avoid the conflicting use of qualifiers. Free text information within the message should be avoided as this inhibits automatic processing. 4.1.1 Header section Information to be provided in the Header section: 00010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the In transit report detail message is ITRRPT. Note: In transit report detail messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 ITRRPT 0052 D 0054 21B 0051 UN 00020 BGM, Beginning of message A segment to indicate the type and function of the In Transit Report Detail message and to transmit its unique identifying number. 00030 DTM, Date/time/period A segment specifying dates and, or time and, or period relevant to the whole message. The DTM segment shall be used at least once to specify the date and where relevant the time of the message. 00040 MEA, Measurements A segment specifying dimensions relevant for the entire consignment such as the total weight and volume of the goods. 00050 CUX, Currencies This segment is used to specify currencies and relevant details for the rate of exchange. 00060 Segment group 1: RFF-DTM A group of segments referencing documents relating to the whole message, and when necessary their dates. 00070 RFF, Reference A segment for referencing documents relating to the whole message, e.g. way bill. 00080 DTM, Date/time/period Date and, or time and, or period of the referred document. 00090 Segment group 2: NAD-LOC-SG3-SG4 A group of segments identifying names, addresses and locations relevant to the whole message. 00100 NAD, Name and address A segment for identifying names and addresses and their functions relevant for the whole message. Identification of the parties involved is recommended for the In Transit Grouping message. They are to be given in the NAD segment. 00110 LOC, Place/location identification A segment indicating more details regarding specific places or locations, e.g. internal site and, or building number. 00120 Segment group 3: RFF-DTM A group of segment giving references relating to the identified party and when necessary their dates. 00130 RFF, Reference A segment giving references relating to the identified party. 00140 DTM, Date/time/period Date and, or time and, or period of the referred document. 00150 Segment group 4: CTA-COM A group of segments to identify person, function, department and appropriate numbers to whom communication should be directed. 00160 CTA, Contact information A segment to identify person, function, department to whom communication should be directed. 00170 COM, Communication contact Identify communication types and numbers for person, function, department identified in the CTA segment. 00180 Segment group 5: TDT-PCD-SG6 A group of segments specifying details of the mode and means of transport and the percentage of its capacity used by the grouped consignment. 00190 TDT, Transport information A segment specifying the carriage, mode and means of transport and its identification. 00200 PCD, Percentage details A segment indicating the utilized capacity of the means of transport. 00210 Segment group 6: LOC-DTM A group of segments giving relevant transport nodes. 00220 LOC, Place/location identification A segment indicating relevant transport nodes. 00230 DTM, Date/time/period A segment giving the date and, or time and, or period information of departure and, or arrival for the specified location. 00240 Segment group 7: EQD-MEA-SEL-EQA-PCD-SG8 A group of segments describing the characteristics of the equipment used for the transportation of goods and where relevant how they are handled. 00250 EQD, Equipment details A segment to define information regarding equipment used. 00260 MEA, Measurements A segment specifying the physical measurements of the equipment. 00270 SEL, Seal number A segment specifying a seal number connected to a specific equipment named in the EQD segment. 00280 EQA, Attached equipment A segment identifying equipment either attached to the equipment described in the EQD segment above. This attached equipment may be further defined in a subsequent EQD segment. 00290 PCD, Percentage details A segment indicating the utilized capacity of the equipment. 00300 Segment group 8: HAN-FTX A group of segments providing information on hazardous goods and their handling. 00310 HAN, Handling instructions A segment providing handling instruction or notification of hazardous materials, or both, in the specified equipment. 00320 FTX, Free text A segment with free text information, in coded or clear form, to give further clarification on hazardous goods and their handling. 4.1.2 Detail section Information to be provided in the Detail section: 00330 Segment group 9: GEI-CDI-DTM-ALI-MEA-MOA-SG10-SG11-SG14-SG15 A group of segments giving details of a set of goods originally described in a single Despatch Advice directly sent to the consignee (see the flow diagram in section 1.3 Principles). 00340 GEI, Processing information A segment used to indicate the start of a loop related to a given original despatch using data element 7365 Processing indicator description code identifying a consignment driven process. 00350 CDI, Physical or logical state A segment used to indicate, if the original despatch has been split, and if yes which part of the original despatch is described (first, intermediate, last). 00360 DTM, Date/time/period A segment giving date and, or time and, or period relevant to the original loop of despatch. 00370 ALI, Additional information A segment indicating special conditions owing to origin, customs preference or commercial factors. 00380 MEA, Measurements A segment specifying dimension of the set of goods as detailed in the segment group, such as weight and volume. 00390 MOA, Monetary amount A segment specifying the packing and transport costs applicable to the despatch for customs clearance. 00400 Segment group 10: RFF-DTM A group of segments giving references and where necessary their dates, relating to the specified goods, e.g. original despatch advice, contract number. 00410 RFF, Reference This segment must be used to refer to the original despatch advice number. It may also be used to give references related to the original despatch advice e.g. purchase order, delivery schedule message, import or export license. 00420 DTM, Date/time/period Date and, or time and, or period of the reference. 00430 Segment group 11: NAD-LOC-SG12-SG13 A group of segments identifying names and addresses, locations, and required supporting documents relevant to the goods as detailed in the GEI-group. 00440 NAD, Name and address A segment for specifying parties by their name, address and function, relevant to the referred goods, e.g. consignor, consignee, freight forwarder. 00450 LOC, Place/location identification A segment indicating specific location details for the specified party, e.g. internal site or building number. 00460 Segment group 12: RFF-DTM A group of segments giving references relevant to the specified party. 00470 RFF, Reference A segment for referencing documents relating to the party specified by the NAD segment. 00480 DTM, Date/time/period Date and, or time and, or period of the reference. 00490 Segment group 13: CTA-COM A group of segments to identify person, function, department and appropriate numbers to whom communication should be directed. 00500 CTA, Contact information A segment to identify person, function, department to whom communication should be directed. 00510 COM, Communication contact Identify communication types and numbers for person, function, department identified in CTA. 00520 Segment group 14: TOD-LOC-FTX A group of segments indicating terms of delivery. 00530 TOD, Terms of delivery or transport A segment indicating the terms of delivery for the referred goods. 00540 LOC, Place/location identification A segment indicating locations qualifying the terms of delivery. 00550 FTX, Free text Additional free text giving terms of delivery. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 00560 Segment group 15: CPS-FTX-SG16-SG20 A group of segments providing details of all packages and, or despatched products. This segment group provides also the capability to give the hierarchical top-down relationship of all package levels. 00570 CPS, Consignment packing sequence To identify the sequence in which physical packing is presented in the consignment, and optionally to identify the hierarchical relationship between packing layers. 00580 FTX, Free text A segment with free text information, in coded or clear form, to give further clarification, when required, to the packaging sequence. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 00590 Segment group 16: PAC-MEA-QTY-SG17-SG18 A group of segments identifying, physical dimensions, marks and numbers, quantities, date and time information, handling information and information about packaging at this level. 00600 PAC, Package A segment specifying the number and type of package or physical units and the physical type of packaging for the despatched goods. 00610 MEA, Measurements A segment specifying measurements of the package. 00620 QTY, Quantity This segment identifies the quantity of items included in the package. Depending on the packaging level, these items are lower level packages or product at the lowest packaging level. 00630 Segment group 17: HAN-FTX A group of segments providing information on hazardous goods and handling. 00640 HAN, Handling instructions A segment providing instructions and notification of hazardous materials contained in the specified package. 00650 FTX, Free text A segment with free text information, in coded or clear form, to give further clarification, when required, to hazardous goods and their handling. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 00660 Segment group 18: PCI-RFF-CDI-DTM-SG19 A group of segments specifying markings and package numbers and the relevant conditions. 00670 PCI, Package identification A segment specifying markings and labels used on individual packages. 00680 RFF, Reference A segment for referencing the package identification e.g. master label number of the package containing all lower level packages identified in the subsequent GIN segment. 00690 CDI, Physical or logical state A segment to give conditions attached to the package referenced by the preceding RFF segment. 00700 DTM, Date/time/period A segment for date/time/period as related to the package, e.g. production date, expiry date, etc. 00710 Segment group 19: GIN-CDI-DLM A group of segments giving package identification numbers and where relevant delivery limitation information. 00720 GIN, Goods identity number A segment providing identity numbers being applied to the described packages. 00730 CDI, Physical or logical state An indicator to reflect specific condition valid for all packages identified by the actual GIN segment. 00740 DLM, Delivery limitations A segment to identify any limitation on delivery of goods e.g. hold until final approval by supplier. 00750 Segment group 20: LIN-PIA-IMD-MEA-CDI-QTY-ALI-GIN-GIR-DTM- MOA-FTX-SG21-SG22-SG23 A group of segments providing details of the individual items contained in the packages. The segments ALI and MOA are only to be used in case they are needed for customs clearance. 00760 LIN, Line item A segment identifying the product. 00770 PIA, Additional product id A segment providing additional product identification. 00780 IMD, Item description A segment for describing the product. This segment should be used for products that cannot be identified by a product code or article number. 00790 MEA, Measurements A segment specifying physical measurements of the delivery product in original or unpacked form. 00800 CDI, Physical or logical state A segment to reflect specific conditions related to the product. 00810 QTY, Quantity A segment to give quantity information. 00820 ALI, Additional information A segment indicating that the product is subjected to special conditions owing to origin, customs preference, or commercial factors. 00830 GIN, Goods identity number A segment providing identity numbers applied to the product, e.g. serial numbers for assembled equipments. 00840 GIR, Related identification numbers A segment providing set of related identification numbers for the product, e.g. engine number, chassis number and transmission number for vehicle. 00850 DTM, Date/time/period A segment providing date and, or time information related to the product e.g. production date. 00860 MOA, Monetary amount A segment to provide the custom value of the product. 00870 FTX, Free text A segment with free text information, in coded or clear form, to give further clarification, when required, to the product. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 00880 Segment group 21: RFF-DTM A group of segments to give reference numbers and dates for the product. 00890 RFF, Reference A segment to provide references related to the product. 00900 DTM, Date/time/period A segment for date and, or time and, or period as related to the reference. 00910 Segment group 22: DGS-QTY-FTX A group of segments giving indication about dangerous goods. 00920 DGS, Dangerous goods A segment to indicate the class of dangerous goods. 00930 QTY, Quantity A segment to specify quantity of the given dangerous goods. 00940 FTX, Free text A segment with free text information, in coded or clear form, to give further clarification, when required, to dangerous goods. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 00950 Segment group 23: PCI-CDI-DTM-QTY-MEA-SG24-SG25 A group of segments identifying one specific package or a number of packages, their marks and numbers, conditions, measurements, quantities, date and time information and handling instructions, used for specified product. 00960 PCI, Package identification A segment specifying marking and labels used on individual used on individual packages or a range of them. 00970 CDI, Physical or logical state A segment to give conditions attached to the corresponding packages. 00980 DTM, Date/time/period A segment indicating the date and, or time details relating to the goods in the package e.g. expiration date. 00990 QTY, Quantity A segment to specify quantity per package. 01000 MEA, Measurements A segment specifying physical measurements of packages. 01010 Segment group 24: GIN-CDI-DLM A group of segments giving package identification numbers and where relevant delivery limitation information. 01020 GIN, Goods identity number A segment providing identification numbers being applied to the packages. 01030 CDI, Physical or logical state A segment to give conditions attached to the package(s) identified in the GIN segment. 01040 DLM, Delivery limitations A segment to identify any limitation on delivery of goods e.g. hold until final approval by supplier. 01050 Segment group 25: HAN-FTX-GIN A group of segments providing information on hazardous material and handling. 01060 HAN, Handling instructions A segment providing information on handling and notification of hazardous materials. 01070 FTX, Free text A segment with free text information, in coded or clear form, to give further clarification, when required, for hazardous materials. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 01080 GIN, Goods identity number A segment providing identification numbers being applied to the package. 4.1.3 Summary section Information to be provided in the Summary section: 01090 CNT, Control total A segment by which control totals may by provided by sender checking by receiver. 01100 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) ALI Additional information BGM Beginning of message CDI Physical or logical state CNT Control total COM Communication contact CPS Consignment packing sequence CTA Contact information CUX Currencies DGS Dangerous goods DLM Delivery limitations DTM Date/time/period EQA Attached equipment EQD Equipment details FTX Free text GEI Processing information GIN Goods identity number GIR Related identification numbers HAN Handling instructions IMD Item description LIN Line item LOC Place/location identification MEA Measurements MOA Monetary amount NAD Name and address PAC Package PCD Percentage details PCI Package identification PIA Additional product id QTY Quantity RFF Reference SEL Seal number TDT Transport information TOD Terms of delivery or transport UNH Message header UNT Message trailer

4.3 Message structure 4.3.1 Segment table Pos Tag Name S R HEADER SECTION 00010 UNH Message header M 1 00020 BGM Beginning of message M 1 00030 DTM Date/time/period C 10 00040 MEA Measurements C 5 00050 CUX Currencies C 9 00060 ---- Segment group 1 ------------------ C 10---------------+ 00070 RFF Reference M 1 | 00080 DTM Date/time/period C 5----------------+ 00090 ---- Segment group 2 ------------------ C 10---------------+ 00100 NAD Name and address M 1 | 00110 LOC Place/location identification C 10 | | 00120 ---- Segment group 3 ------------------ C 10--------------+| 00130 RFF Reference M 1 || 00140 DTM Date/time/period C 5---------------+| | 00150 ---- Segment group 4 ------------------ C 10--------------+| 00160 CTA Contact information M 1 || 00170 COM Communication contact C 5---------------++ 00180 ---- Segment group 5 ------------------ C 10---------------+ 00190 TDT Transport information M 1 | 00200 PCD Percentage details C 5 | | 00210 ---- Segment group 6 ------------------ C 10--------------+| 00220 LOC Place/location identification M 1 || 00230 DTM Date/time/period C 10--------------++ 00240 ---- Segment group 7 ------------------ C 10---------------+ 00250 EQD Equipment details M 1 | 00260 MEA Measurements C 5 | 00270 SEL Seal number C 99 | 00280 EQA Attached equipment C 5 | 00290 PCD Percentage details C 5 | | 00300 ---- Segment group 8 ------------------ C 10--------------+| 00310 HAN Handling instructions M 1 || 00320 FTX Free text C 10--------------++ DETAIL SECTION 00330 ---- Segment group 9 ------------------ M 99---------------+ 00340 GEI Processing information M 1 | 00350 CDI Physical or logical state C 1 | 00360 DTM Date/time/period C 10 | 00370 ALI Additional information C 5 | 00380 MEA Measurements C 5 | 00390 MOA Monetary amount C 5 | | 00400 ---- Segment group 10 ------------------ M 10--------------+| 00410 RFF Reference M 1 || 00420 DTM Date/time/period C 1---------------+| | 00430 ---- Segment group 11 ------------------ C 10--------------+| 00440 NAD Name and address M 1 || 00450 LOC Place/location identification C 10 || || 00460 ---- Segment group 12 ------------------ C 10-------------+|| 00470 RFF Reference M 1 ||| 00480 DTM Date/time/period C 1--------------+|| || 00490 ---- Segment group 13 ------------------ C 10-------------+|| 00500 CTA Contact information M 1 ||| 00510 COM Communication contact C 5--------------++| | 00520 ---- Segment group 14 ------------------ C 10--------------+| 00530 TOD Terms of delivery or transport M 1 || 00540 LOC Place/location identification C 5 || 00550 FTX Free text C 5---------------+| | 00560 ---- Segment group 15 ------------------ C 9999------------+| 00570 CPS Consignment packing sequence M 1 || 00580 FTX Free text C 5 || || 00590 ---- Segment group 16 ------------------ C 9999-----------+|| 00600 PAC Package M 1 ||| 00610 MEA Measurements C 10 ||| 00620 QTY Quantity C 10 ||| ||| 00630 ---- Segment group 17 ------------------ C 10------------+||| 00640 HAN Handling instructions M 1 |||| 00650 FTX Free text C 10------------+||| ||| 00660 ---- Segment group 18 ------------------ C 9999----------+||| 00670 PCI Package identification M 1 |||| 00680 RFF Reference C 1 |||| 00690 CDI Physical or logical state C 1 |||| 00700 DTM Date/time/period C 5 |||| |||| 00710 ---- Segment group 19 ------------------ C 99-----------+|||| 00720 GIN Goods identity number M 1 ||||| 00730 CDI Physical or logical state C 1 ||||| 00740 DLM Delivery limitations C 999----------+++|| || 00750 ---- Segment group 20 ------------------ C 1--------------+|| 00760 LIN Line item M 1 ||| 00770 PIA Additional product id C 10 ||| 00780 IMD Item description C 99 ||| 00790 MEA Measurements C 10 ||| 00800 CDI Physical or logical state C 1 ||| 00810 QTY Quantity C 10 ||| 00820 ALI Additional information C 10 ||| 00830 GIN Goods identity number C 999 ||| 00840 GIR Related identification numbers C 999 ||| 00850 DTM Date/time/period C 5 ||| 00860 MOA Monetary amount C 1 ||| 00870 FTX Free text C 5 ||| ||| 00880 ---- Segment group 21 ------------------ C 10------------+||| 00890 RFF Reference M 1 |||| 00900 DTM Date/time/period C 1-------------+||| ||| 00910 ---- Segment group 22 ------------------ C 10------------+||| 00920 DGS Dangerous goods M 1 |||| 00930 QTY Quantity C 1 |||| 00940 FTX Free text C 5-------------+||| ||| 00950 ---- Segment group 23 ------------------ C 9999----------+||| 00960 PCI Package identification M 1 |||| 00970 CDI Physical or logical state C 1 |||| 00980 DTM Date/time/period C 5 |||| 00990 QTY Quantity C 1 |||| 01000 MEA Measurements C 10 |||| |||| 01010 ---- Segment group 24 ------------------ C 10-----------+|||| 01020 GIN Goods identity number M 1 ||||| 01030 CDI Physical or logical state C 1 ||||| 01040 DLM Delivery limitations C 999----------+|||| |||| 01050 ---- Segment group 25 ------------------ C 10-----------+|||| 01060 HAN Handling instructions M 1 ||||| 01070 FTX Free text C 5 ||||| 01080 GIN Goods identity number C 9999---------+++++ SUMMARY SECTION 01090 CNT Control total C 1 01100 UNT Message trailer M 1

Copyright United Nations, all rights reserved
 
UN Economic Commission for Europe
Palais des Nations, CH-1211 Geneva 10, Switzerland
Tel: +41-22 917 1366 Fax: +41-22 917 0037 E-mail: TradeMaster@unece.org
 
UN/EDIFACT Directories