United Nations Directories for Electronic Data Interchange for Administration, Commerce and Transport UN/EDIFACT |
Message Type : CALINF Version : D Release : 22B Contr. Agency: UN Revision : 4 Date : 2022-12-20 SOURCE: TBG3 Transport CONTENTS Vessel call information message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table --------------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction --------------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Vessel call information message (CALINF) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE 1.1 Functional definition Notice from a liner agent to a stevedore providing information concerning the expected arrival of a vessel and the expected cargo operations. This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'. 1.2 Field of application The Vessel call information message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles In the context of the 'Guide to the scenario of EDIFACT container messages' (as referred to at the start of section 1) the following guidelines, rules and functionality apply to this Vessel call information message: * A message will contain information on only one means of transport/conveyance. * Separate messages (Vessel call information message and Vessel departure message) will be used for the means of transport in order to cater for opening and closing of the information exchange related to that means of transport. Updates for these messages may be sent. * The message contents can be uniquely identified by a combination of the following message level data elements for the Container Logistics scenario: - Voyage number or indication of sea transport (TDT and/or RFF) - Vessel radio call sign (TDT) - Shipping line (TDT) * Both the expected date and/or time of arrival and the expected date and/or time of departure of the vessel can be given. * For planning purposes, information on the expected handling of containers as well as on certain goods item descriptions can be completed. The transport sub-working group (D4) has developed recommendations for a harmonised implementation of this message through its subgroup ITIGG (International Transport Implementation Guidelines Group). Users implementing the message are strongly advised to apply these recommendations, which may be obtained from the D4 secretariat. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. 00010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Vessel call information message is CALINF. Note: Vessel call information messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 CALINF 0052 D 0054 22B 0051 UN 00020 BGM, Beginning of message A segment to indicate the beginning of a message and to transmit identifying number. 00030 DTM, Date/time/period A segment to indicate a date and/or time applying to the whole message, such as date and time of document or message issue. 00040 Segment group 1: FTX-MEA-EQN A group of segments to specify free format supplementary information and to describe totals to be loaded and/or discharged for certain general goods descriptions. 00050 FTX, Free text A segment to specify free format supplementary information and to specify the type of cargo by a general goods description, such as: - Change information - Additional instructions - Description of goods - general description. 00060 MEA, Measurements A segment to specify total measurements, other than dimensions, applicable to the specified general description of goods, such as: - Gross measurement or cube - Gross weight. 00070 EQN, Number of units A segment to specify the number of units relating to the specified general description of goods. 00080 Segment group 2: RFF-DTM A group of segments to specify a reference relating to the whole message, and its date and/or time. 00090 RFF, Reference A segment to provide a reference relating to the whole message, such as: - reference to previous message. 00100 DTM, Date/time/period A segment to indicate date and/or time related to the reference. 00110 Segment group 3: NAD-SG4 A group of segments to identify a party and related contacts. 00120 NAD, Name and address A segment to identify a name and address of a party, such as: - message sender - message recipient - ordering customer/principal - ordering customer agent 00130 Segment group 4: CTA-COM A group of segments to identify a contact and its communications related to the party. 00140 CTA, Contact information A segment to identify a person or department for the party, such as: - information contact 00150 COM, Communication contact A segment to identify a communication number of a person or department to whom information should be directed. 00160 Segment group 5: TDT-DTM-RFF-SG6-DIM-FTX A group of segments to specify details for the arriving means of transport. 00170 TDT, Transport information A segment to identify the transport details of the arriving vessel, such as voyage number or indication of sea transport for the arriving means of transport at arrival (so, the discharge voyage number). 00180 DTM, Date/time/period A segment to identify a date and time related to the arrival and departure of the means of transport, such as estimated date and time of arrival and departure. 00190 RFF, Reference A segment to identify a relevant reference number, such as: - Customs declaration number - shipping line reference - Voyage number or indication of sea transport for arriving means of transport at departure (so, the loading voyage number). 00200 Segment group 6: LOC-DTM A group of segments to identify locations related to the transport details. 00210 LOC, Place/location identification A segment to identify locations related to the transport details, such as: - previous port of call - next port of call - place/port of discharge - place of berth - destination sailing area 00220 DTM, Date/time/period A segment to specify date(s) and time(s) related to a location. 00230 DIM, Dimensions A segment to specify dimensions related to the arriving means of transport: - Water displacement dimensions (width and/or length and/or draught of vessel). 00240 FTX, Free text A segment to provide supplementary information related to the means of transport, such as: - additional remarks related to the transport - remarks 00250 Segment group 7: QTY-FTX A group of segments to specify total numbers. 00260 QTY, Quantity A segment to specify the planned number of operations on equipment for the arriving vessel. 00270 FTX, Free text A segment to provide supplementary information related to the planned number of operations on equipment. 00280 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) BGM Beginning of message COM Communication contact CTA Contact information DIM Dimensions DTM Date/time/period EQN Number of units FTX Free text LOC Place/location identification MEA Measurements NAD Name and address QTY Quantity RFF Reference TDT Transport information UNH Message header UNT Message trailer
4.3 Message structure 4.3.1 Segment table Pos Tag Name S R 00010 UNH Message header M 1 00020 BGM Beginning of message M 1 00030 DTM Date/time/period C 9 00040 ---- Segment group 1 ------------------ C 99---------------+ 00050 FTX Free text M 1 | 00060 MEA Measurements C 9 | 00070 EQN Number of units C 1----------------+ 00080 ---- Segment group 2 ------------------ C 9----------------+ 00090 RFF Reference M 1 | 00100 DTM Date/time/period C 9----------------+ 00110 ---- Segment group 3 ------------------ M 9----------------+ 00120 NAD Name and address M 1 | | 00130 ---- Segment group 4 ------------------ C 9---------------+| 00140 CTA Contact information M 1 || 00150 COM Communication contact C 9---------------++ 00160 ---- Segment group 5 ------------------ M 1----------------+ 00170 TDT Transport information M 1 | 00180 DTM Date/time/period C 9 | 00190 RFF Reference C 9 | | 00200 ---- Segment group 6 ------------------ M 9---------------+| 00210 LOC Place/location identification M 1 || 00220 DTM Date/time/period C 9---------------+| 00230 DIM Dimensions C 1 | 00240 FTX Free text C 9----------------+ 00250 ---- Segment group 7 ------------------ C 9----------------+ 00260 QTY Quantity M 1 | 00270 FTX Free text C 1----------------+ 00280 UNT Message trailer M 1